The DEPARTMENT OF THE ARMY has issued a Tender notice for the procurement of a Gym equipment in the USA. This Tender notice was published on 21 Aug 2015 and is scheduled to close on 24 Aug 2015, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 3515826, while the tender notice number is 0010733616 and Register on the platform.
The MICC Fort Sill requires the following items, Brand Name or Equal, to the following:
LI 001: Deluxe Olympic Decline Bench Press Salient Characteristics: The decline bench press must contain a padded bench, an attached metal rack system to hold the barbell, and weight storage tabs to hold extra plates. - The padded bench shall be a fixed, downward angle, between 15-30 degrees. - The attached metal rack system, comprised of two vertical metal poles, must be capable of supporting 7.2ft barbell and have adjustable tabs so the barbell can be placed at varying heights above the bench. - There must be six total weight storage tabs attached to the rack system to hold extra Olympic plates. The tabs must have a circumference between 40 and 50 millimeters., 1, EA;
LI 002: TB-1 Rogue Trap Bar Salient Characteristics: The trap bar shall be rack able (able to be racked in a power rack, squat stand or rig), have knurled handles for grip, have 25" handle spacing, and 16" reloadable sleeves. It also shall meet the following criteria: - Measure 88"L x 28-1/2"W x 3"H. - Have a diameter of 1-1/4" on the sleeves. - Made with 1-1/2" x 1-1/2" square steel tubing., 1, EA;
LI 003: ABMAT Salient Characteristics: The ABMAT shall meet the following criteria: - Color:Black - Length: 15" - Width: 12" - Height: 2-1/2", 2, EA;
LI 004: 2.5LB Grey Olympic Plate Salient Characteristics: The 2.5LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 2.5LB - Material Type: Cast Iron - Inner Diameter: 49-55mm, 6, EA;
LI 005: 5LB Grey Olympic Plate Salient Characteristics: The 5LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 5LB - Material Type: Cast Iron - Inner Diameter: 49-50mm (must be able to fit Olympic barbell), 8, EA;
LI 006: 10LB Grey Olympic Plate Salient Characteristics: The 10LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 10LB - Material Type: Cast Iron - Inner Diameter: 49-55mm (must be able to fit Olympic barbell), 8, EA;
LI 007: 25LB Grey Olympic Plate Salient Characteristics: The 25LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 25LB - Material Type: Cast Iron - Inner Diameter: 49-55mm (must be able to fit Olympic barbell), 6, EA;
LI 008: 35LB Grey Olympic Plate Salient Characteristics: The 35LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 35LB - Material Type: Cast Iron - Inner Diameter: 49-55mm (must be able to fit Olympic barbell), 6, EA;
LI 009: 45LB Grey Olympic Plate Salient Characteristics: The 45LB Grey Olympic plates (come in pairs) shall meet the following criteria: - Weight: 45LB - Material Type: Cast Iron - Inner Diameter: 49-55mm (must be able to fit Olympic barbell), 14, EA;
LI 010: Hammer Strength Back Extension Salient Characteristics: The Hammer Strength Back Extension has no salient characteristics., 1, EA;
LI 011: Plyometric Box Set Salient Characteristics: The plyometric box set shall meet the following criteria: - Contain 6 total plyometric boxes. One 12" Box, one 18" box, one 30" box, one 36" box, and one 43" box. - The boxes shall be stackable, that is, they shall be able to be stacked on top of each other for easy storage. - The boxes shall each have an anti-skid surface on top to prevent Soldiers from slipping when they jump on top of them. - The boxes shall be made of steel with all joints connected by welding., 2, EA;
LI 012: 3 Tier Mass Storage System Salient Characteristics: The 3 Tier Mass Storage System shall meet the following criteria: - Size: 47"L x 14"D x 72"H - Material: 2" x 2" 11 gauge steel. - Be able to hold at least 600 lbs. - Have 3 shelves. - Have at least 4 heavy duty wheels., 1, EA;
LI 013: Rogue Metal Gymnastic Rings Salient Characteristics: The gymnastic rings has no salient characteristics., 1, EA;
LI 014: Swiss Bar Salient Characteristics: The Swiss bar has no salient characteristics., 1, EA;
LI 015: 20KG Rogue 3mm "BEATER" Bar Salient Characteristics: The Beater Bar shall meet the following criteria: - Bar Weight: 20kg - Diameter: 31mm - Shall contain Olympic type knurl on the bar where the hands will be positioned. There will not be knurling in the middle of the bar. - The loadable sleeve length shall be 16", 3, EA;
LI 016: Olympic Plate Tree & Bar Hold Salient Characteristics: The Plate Tree and Bar Hold shall contain the following characteristics: - At least two bar holds. - At least six weight storage tabs to hold weight., 2, EA;
LI 017: Ivanko Olympic Spring Clamp Collars Salient Characteristics: The Spring Clamp Collars will be 6"L x 1"W., 3, EA;
LI 018: Wall Mount Chin and Pull-Up Bracket Salient Characteristics: The wall mount chin and pull-up bracket will have a 52" long pull-up bar., 1, EA;
LI 019: Weight Lifting Belt (M) Salient Characteristics: The Medium Weight Lifting Belt shall meet the following criteria: - Length: 45" - Width: 0.25" - Height: 4" - Material: Leather, 2, EA;
LI 020: Weight Lifting Belt (L) Salient Characteristics: The Large Weight Lifting Belt shall meet the following criteria: - Length: 48" - Width: 0.25" - Height: 4" - Material: Leather, 2, EA;
LI 021: Rogue Dip Belt Salient Characteristics: The Dip Belt shall meet the following criteria: - Width: 3" - Material: Heavy Duty Nylon - Contain a 4" wide back piece - Contain a 30" x 1/4" long chain - Contain 2x steel carabineers - Be rated at 29, 400 lbs, 2, EA;
LI 022: Rogue 5/8" Chain Kit Salient Characteristics: The Chain Kit shall meet the following criteria: - Contain 2ea 20lb lengths of 5/8" chains with carabineers. - Contain 2ea 4' lengths of 1/4" chain with carabineers. - Chains shall be zinc electroplated to prevent rust., 1, EA;
LI 023: Hammer Strength Iso-Lateral Incline Pres Salient Characteristics: The Hammer Strength Iso-Lateral Incline Press shall meet the following criteria: - Weight: 325lbs. - Length: 39" - Width: 52" - Height: 75" - "Plate Loaded" i.e. the machine must be able to hold standard Olympic size metal plates. - Contain a horizontal grip. - Contain six weight storage tabs, or "horns". - Frame shall be made of 11 gauge steel. - Contain an adjustable seat, allowing for multiple weight-lifting angles. - Iso-lateral motion; i.e. provide the function where each arm must be completely sef-sufficient, or able to fully function apart from the other arm. - Starting Resistance: 8lbs., 1, EA;
LI 024: Hammer Strength Iso-Lateral Shoulder Pre Salient Characteristics: The Hammer Strength Iso-Lateral Shoulder Press shall meet the following criteria: - Weight: 350lbs. - Length: 51" - Width: 58" - Height: 74" - "Plate Loaded" i.e. the machine must be able to hold standard Olympic size metal plates. - Contain six weight storage tabs, or "horns". - Back pad angled at 40 degrees. - Contain a seat belt. - Contain a adjustable seat. - Iso-lateral motion; i.e. provide the function where each arm must be completely sef-sufficient, or able to fully function apart from the other arm. - Starting Resistance: 10lbs., 1, EA;
LI 025: Hammer Strength Iso-Lateral Low Row Salient Characteristics: The Hammer Strength Iso-Lateral Low Row shall meet the following criteria: - Weight: 335lbs. - Length: 48" - Width: 47" - Height: 67" - "Plate Loaded" i.e. the machine must be able to hold standard Olympic size metal plates. - Contain six weight storage tabs, or "horns". - Frame shall be made of 11 gauge steel. - Starting Resistance: 8lbs - Iso-lateral motion; i.e. provide the function where each arm must be completely sef-sufficient, or able to fully function apart from the other arm. - Contains an adjustable seat., 1, EA;
LI 026: Hammer Strength Iso-Lateral Wide Pulldow Salient Characteristics: The Hammer Strength Iso-Lateral Wide Pulldown shall meet the following criteria: - Weight: 320lbs. - Length: 71" - Width: 42" - Height: 80" - "Plate Loaded" i.e. the machine must be able to hold standard Olympic size metal plates. - Contain six weight storage tabs, or "horns". - Frame shall be made of 11 gauge steel. - Starting Resistance: 2 lbs - Iso-lateral motion; i.e. provide the function where each arm must be completely sef-sufficient, or able to fully function apart from the other arm. - Use a "double iso-lateral" configuration (pivots are angled in two planes). - Contain an adjustable seat., 1, EA;
LI 027: Hammer Strength Iso-Lateral Rowing Salient Characteristics: The Hammer Strength Iso-Lateral Rowing shall meet the following criteria: - Weight: 280lbs. - Length: 59" - Width: 50" - Height: 51" - "Plate Loaded" i.e. the machine must be able to hold standard Olympic size metal plates. - Contain six weight storage tabs, or "horns". - Frame shall be made of 11 gauge steel. - Starting Resistance: 12 lbs - Iso-lateral motion; i.e. provide the function where each arm must be completely sef-sufficient, or able to fully function apart from the other arm. - Contain an adjustable seat., 1, EA;
LI 028: Hammer Strength Arm Curl, Seated Salient Characteristics: The Hammer Strength Arm Curl Seated shall meet the following criteria: - Length: 39" - Width: 36" - Height: 43" - Weight: 160lbs. - Made of 11 gauge steel. - Contain an adjustable seat., 1, EA;
LI 029: Multi Jungle LAT Pull Down Station Salient Characteristics: The Multi Jungle LAT Pulldown Station shall meet the following criteria: - Contain a Triceps pushdown station. - Contain a Lat Pulldown station. - Contain a Dual Pulley Pulldown station. - Contain a Dual Pulley Row Station. - Contain an Adjustable Pulley Station. - Contain a Fixed Pulley Cable Crossover Station. - Contain an Adjustable Pulley Cable Crossover Station. - Contain chin-up and pull-up bars. - 8 individuals must be able to work out simultaneously. - Made of 11 gauge steel., 1, EA;
LI 030: ISO-Lateral Super Incline Press Salient Characteristics: The ISO-Lateral Super Incline Press shall meet the following criteria: - Weight: 360lbs - Length: 50" - Width: 59" - Height: 60" - Starting Resistance: 11lbs - Standard Weight Horns: 6 - The angle of the press shall be between a normal incline press and a shoulder press, hence the term, "super-incline press"., 1, EA;
The bid deadline for Gym equipment was 24 Aug 2015. Bidding is closed.
This tender has been issued by DEPARTMENT OF THE ARMY in USA.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 37420000 - Gymnasium equipment.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 3515826. The purchaser document reference is 0010733616.