Expired Tender Netherlands ICB TOT Ref. 98875042

Fault-Tolerant Network Switching Using Cots Tender - 98875042

Tender notice from Netherlands, published on 16 Mar 2024.

Executive Summary

The EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE has issued a Tender notice for the procurement of a Fault-Tolerant Network Switching Using Cots Network Switch Components in the Netherlands. This Tender notice was published on 16 Mar 2024 and is scheduled to close on 29 May 2024, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 98875042, while the tender notice number is 1-11724 and Register on the platform.

Key facts

Summary
Fault-Tolerant Network Switching Using Cots Network Switch Components
TOT Ref. No.
98875042
Document Ref. No.
1-11724
Country
Netherlands
Notice type
Tender
Competition
ICB
Publication date
16 Mar 2024
Bid deadline
29 May 2024
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Other Funding Agencies

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

General Procurement Notice for Fault-Tolerant Network Switching Using Cots Network Switch Components (Artes 4.0 at 5c.503) (Re-Issue)
Price Range 500 KEURO
The objective of the activity is to develop and test a power-efficient, high-throughput and fault-tolerant network switching architecture for regenerative processors using COTS System-on-Chip (SoC) components as software-defined network switches. This will include radiation testing and development of fault mitigation methods (at system and software level). Targeted Improvements: Enabling reliable software-defined packet switching using COTS components. Description:On-board payload data handling systems for regenerative payloads will need to support tens to hundreds of individual channels and route a high number of packets with low latency to their destinations, whilst ensuring low packet loss through the network and keeping within a restricted power budget. Network switch components are important elements in packet routers. Commercial-off-the-shelf (COTS) System-on-Chip (SoC) components with multiple processors and high-speed interfaces could enable high-performance software-defined packet switching and reconfiguration of protocols in flight. In addition, such devices can offer additional processing capabilities within the payload. However, for COTS System-on-Chips, detailed SEE (Single-Event Effects) test results are currently not available. In addition, dedicated fault-mitigation techniques have yet to be developed. Due to the stringent requirements of availability and low loss of data in satellite communication applications, detailed knowledge of the failure modes of the COTS switch components must be obtained to appropriately mitigate such issues and enable fault-tolerant systems. In addition, at system level, it must be ensured that a permanent failure of a component does not disable an entire link and therefore dedicated redundancy and cross-strapping methods for network links shall be taken into account. This activity will evaluate COTS System-on-Chip devices that could be used for network switching. A network switching architecture and requirements for a representative satellite communication application will be defined and COTS System-on-Chip components that will potentially fulfill the defined requirements will be surveyed and traded-off for selection. In addition, the processing capabilities of the SoC devices shall be assessed as enablers for new functionalities (e.g., packet inspection). Radiation tests will be performed to characterise the selected device(s). Fault-tolerance techniques based on the error modes discovered by radiation testing will be derived, including system-level SEFI mitigation techniques to automatically recover the switching function in case of fault, including external monitoring circuits and real-time software monitoring of errors and housekeeping data (for example, the possibility to track the number of successful packets and act in case of a high number of errors on a link). A breadboard with multiple links and fault-mitigation features will be developed. The performance of the fault mitigation techniques deployed in the breadboard will be verified through fault injection and possible additional radiation testing. The radiation test results will be available for the Agency to distribute upon request to companies in ESA member states.

Documents

Tender Notice
Login to view

Netherlands Public Procurement Intelligence

Frequently asked questions

The bid deadline for Fault-Tolerant Network Switching Using Cots Network Switch Components was 29 May 2024. Bidding is closed.

This tender has been issued by EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE in Netherlands.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 98875042. The purchaser document reference is 1-11724.

Browse other tenders from Netherlands or search by relevant keywords and CPV classification.