Emergency Livelihoods Support to Adnaniya Complex Tender - 74524528
Tender notice from Iraq, published on 14 Nov 2022.
Executive Summary
The NADIA-S INITIATIVE has issued a Tender notice for the procurement of a Emergency Livelihoods Support to Adnaniya Complex in the Iraq. This Tender notice was published on 14 Nov 2022 and is scheduled to close on 27 Nov 2022, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 74524528, while the tender notice number is and Register on the platform.
Tenders are invited for Emergency Livelihoods Support to Adnaniya Complex Gate Door Steel Gate Door Two Leaves: Supply of materials, tools and manpower to remove the damaged steel door and removing the debris and rubble to a site approved by local authority, then install new steel door (two leaves), including plate gauge 16 on single face, the gate has a frame of steel angle (75x75x5mm) and sub divider of pipe (40x40x2mm) @ 40cm c/c, The price of work shall include painting with anti-rust and 2 layers oil paint, rollers, door handles and locks. All needed works to complete the job, will be included within the price. The work includes repairing damaged doors edges m2 24
Steel door "Steel Door with the Frame):
Supply of materials, tools and manpower to install steel door with frame use steel tube (80*40*3mm), with steel plate gauge 18(1.41mm) on double face, using steel tube 30x30x2mm, including a layer of Styrofoam to be placed between the two faces, hinges, doors handles, locks and fixing a stopper on the floor or wall. The price of work includes the painting of steel door using anti-rust and 2 layers of oil paint. All needed work to complete the job will be included within the price.. The work includes repairing damaged door edges " M2 70
plastic door "PVC Doors with Frame(Super Turkish type):
Supply of materials, tools and manpower to install PVC doors with frame. The PVC section should be wide section. The lower portion of the door to be covered by PVC sheets and the upper portion will be covered by frosted glass 4mm. The price includes hinges, handles, locks and frosted glass 4mm) . All needed works to complete the job will be included within the price. . The work includes repairing damaged doors edges " M2 180
Steel Window "Steel windows:
Supply of materials, tools and manpower to install steel windows (using T, L and Z shapes) with the thickness of steel not less than 2mm. The price of works includes anti rust painting and two layers of oil painting, anti-insects wire mesh, handles, windows stopper and crystal clear class 4mm thickness with paste and steel protection 12mm of window. All needed work to complete the job will be included within the price.The work includes repairing damaged windows edges" M2 15
Plastic window "PVC Windows (Super Turkish type) :
Supply of materials, tools and manpower to install Plastic windows (using Turkih type). The price of works includes wire mesh, handles, windows stopper and crystal clear class 4mm thickness . All needed work to complete the job will be included within the price .All works must be done under instructions of supervisor engineer.The work includes repairing damaged windows edges" M2 194
Water filter RO water filter with tank 7 stages with capacity 200 ltr per day.The work includes connecting NO. 15
Water tank Plastic Water Tank :Supplying and installing a plastic water tank 2000 liters, original manufactured by Moayed factory, 10 years guarantee .The work includes connecting NO. 15 1 "Site preparation:
Supply of materials, tools, machineries and manpower for site preparation. The work includes :
1-Clearing, stripping and levelling of the site.
2-Removing undesired plants and other natural vegetation.
3-Removing undesired furniture and transported it to the to any location instructed to.
4-Removing all the damaged roofing layers, slabs, walls, fences, finishing materials, flooring tiles, tile bedding, etc.
5-Demolishing all the destroyed building parts.
6-Dumping of all the debris and rubble to a site approved by the local authorities.
All needed work to complete the job will be included within the price.
7-The work includes back filling of suitable soil or material approved by Engineer to required level of foundation according to the site Engineer instructions" LS 1
2 "Cement Plastering
Supply of materials, tools and manpower for cement plastering with 20mm thickness smooth-finished for exterior walls and fences walls using aluminum straight edges. The price includes three layers as follows: one layer of cement splash dash, one layer of rough (kafmal) and finally smooth finished cement plastering with cement-sand mortar. All needed works to complete the job will be included within the price." m2 250
3 "Steel Door with the Frame):
Supply of materials, tools and manpower to install steel door with frame use steel tube (80*40*3mm), with steel plate gauge 18(1.41mm) on double face, using steel tube 30x30x2mm, including a layer of Styrofoam to be placed between the two faces, hinges, doors handles, locks and fixing a stopper on the floor or wall. The price of work includes the painting of steel door using anti-rust and 2 layers of oil paint. All needed work to complete the job will be included within the price.. The work includes repairing damaged door edges " no. 7
4 "PVC Doors with Frame(1.0x2.10m):
Supply of materials, tools and manpower to install PVC doors with frame. The PVC section should be wide section. The lower 1.0m portion of the door to be covered by PVC sheets and the upper portion will be covered by frosted glass 6mm. The price includes hinges, handles, locks and frosted glass (6mm) . All needed works to complete the job, will be included within the price. " no. 4
5 " Steel Gate Door (2.4x3.0m) Two Leaves:
Supply of materials, tools and manpower to remove the damaged sliding steel door and removing the debris and rubble to a site approved by local authority, then install new slide steel door (two leaves), including plate gauge 18(1.41mm) on double faces, the gate has a frame of square steel pipe (75x75x3mm) and sub divider of pipe (50x50x3mm) @ 40cm c/c, slide steel frame U channel (84mm) top and bottom. The price of work shall include painting with anti-rust and 2 layers oil paint, rollers, door handles and locks. All needed works to complete the job, will be included within the price. " no. 1
6 "PVC Windows (Super Turkish type) :
Supply of materials, tools and manpower to install Plastic windows (using Turkih type). The price of works includes wire mesh, handles, windows stopper and crystal clear class 4mm thickness also the price includes provide an iron frame device to protect the window. All needed work to complete the job will be included within the price .All works must be done under instructions of supervisor engineer.The work includes repairing damaged windows edges" M2 18
7 "Emulsion OR Oil painting for exterior, Interior walls and fence:
Supply of materials, tools and manpower to paint the exterior walls and fence, with three layers of plastic (silicon water proof) paint (Jotun, Betek, CAPAROL, Polisan, dyo or equivalent). The paint should be diluted (10%--15%) with water to achieve the coverage of painting of not more than (10-12) m2/Liter/layer. The job includes cleaning the walls, removing the dirt and dust, repairing all the cracks and filling all the holes before painting. All needed works to complete the job, shall be included within the price." m2 1000
8 "Main Distribution Board:
Providing, Installation, testing and commissioning of prefabricated chamber (60cm x 40 cm x 20cm) with Board includes to accommodate in DIN bar/panel mounting the incoming and outgoing A - 2 x 3 pole, breaking capacity 16kA, MCCB 100A, 415V
B- (1 No.)Voltmeter (0- 400 V) with selector switch.
C - (1 Set)Ammeter (0 -250 A), 100/5A with required CTs.
D - (1 No.)Hertz meter (48- 52 )Hz.
E - (1 No.) selector switch.
F - (3 No.) Indicator lamp 220VAC/5A ( for each phase) the price includes accessories, drilling holes, connections, fixing etc., to complete work as required. " no. 1
9 "LED Spot Lighting:
Supply, install, connect and commission spot lighting fixtures, LED (240VAC/18 W), complete set with all accessories such as base, LED drive & LED bulb, glass, reflector includes wiring with 1.0 kV grade 2*1.5mm² PVC insulated copper cable/wires laid inside existing concealed PVC pipe and if required laid through new surface PVC pipe (20 mm dia) with 6 A switches with all accessories. The price includes supplying, installing, connecting, laying, drilling & cutting ( concrete wall if required ) and commissioning to complete works as required. " no. 26
10 "Socket Switch(13A):
Supplying & fixing of universal 3-pin, 13A switch/socket combined, shuttered PVC molded tough surface box metal box (recessed or surface) with fiber sheet cover price includes using with 1. 0 kV grade, 2x 2.5 mm ² PVC insulated copper cable with all accessories for necessary cutting, drilling, fixing, connecting, testing etc. to complete works as required. " no. 12
11 " Switch 6A
Supply, install, connect and commission one way (220VAC/6A) switch price includes wiring with1.0KV grade, 2x 1.5mm² PVC insulated copper conductor through PCV conduit (20 mm dia), with all accessories for necessary cutting, drilling, testing etc. to complete works as required with existing type of switches " no. 10
12 "Ceiling Fan:
Supply, install, test and commission of ceiling fan (240 volt A.C 1400 rpm, 1400mm sweep with 56""), down rod of standard length upto 300mm, sweep 3 Nos., canopy 2 Nos., condenser and fan body, with power regulator etc., price includes wiring with1.0KV grade, 1.5x2mm² PVC insulated copper conductor through PCV conduit (20 mm dia), with all accessories for necessary cutting, drilling, testing etc. to complete works as required. " no. 5
13 "Power Cable (4Core16mm²):
Supplying, laying and connecting 4x16 mm² 1.0KV grade PVC insulated sheathed un-armoured Copper conductor price includes all accessories, supplying, laying and connecting, drilling, testing etc. to complete works as required. " M.L 50
14 "Eastern toilet:
Supply of materials, tools and manpower to remove the damaged eas
The bid deadline for Emergency Livelihoods Support to Adnaniya Complex was 27 Nov 2022. Bidding is closed.
This tender has been issued by NADIA-S INITIATIVE in Iraq.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is financed by Other Funding Agencies.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 74524528. The purchaser document reference is not provided in the notice.
Browse other tenders from Iraq or search by relevant keywords and CPV classification.