Expired Tender Netherlands ICB TOT Ref. 100698534

Direct Aluminum Mirror Polishing Techniques Tender - 100698534

Tender notice from Netherlands, published on 02 May 2024.

Executive Summary

The EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE has issued a Tender notice for the procurement of a Direct Aluminum Mirror Polishing Techniques for Free-Form Surfaces in the Netherlands. This Tender notice was published on 02 May 2024 and is scheduled to close on 24 May 2024, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 100698534, while the tender notice number is 1-12339 and Register on the platform.

Key facts

Summary
Direct Aluminum Mirror Polishing Techniques for Free-Form Surfaces
TOT Ref. No.
100698534
Document Ref. No.
1-12339
Country
Netherlands
Notice type
Tender
Competition
ICB
Publication date
02 May 2024
Bid deadline
24 May 2024
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
Public
Financier
Other Funding Agencies

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Tenders are invited for Direct Aluminum Mirror Polishing Techniques for Free-Form Surfaces.
Open Date: 25/04/2024 15:07 CET
Closing Date: 24/05/2024 13:00 CET
Price Range: 200-500 KEURO
Opto-mechanical systems, which consist of only one material are extremely useful, since there are no differences with respect to the coefficients of thermal expansion (CTE) within the system and thus it can maintain alignment for large temperature regimes. Additionally, if the given material is aluminium, even the thermal gradients can be efficiently reduced and system stability further increased. All-aluminium opto-mechanical structures can form the basis of compact, high-performance, cost-effective all-reflective systems such as telescopes, collimators and relays.So far, these optical systems were limited due to the achievable surface quality of the mirrors. Single point diamond turning is routinely used to produce Al mirrors, but the technology has its limitations: the achievable surface form error is around 100nm RMS and even worse for large mirrors (250mm), and surface roughness is generally not better than 4-5nm RMS. By using electroless Ni plating on Al substrate and post-polishing the Ni layer, the optical quality can be improved but the resulting mirrors will suffer from bi-metallic effects. CTE of Ni and certain Al alloys (with high silicon content) can be matched, but the technique is complex and not cost effective. Direct Al mirror polishing for flat and spherical surfaces has been done, but the technique is not developed yet for aspherical or freeform shapes. Naturally, the larger the deviation from spherical forms, while maintaining the surface shape accuracy and roughness, the more the technology can be applied to a wide variety of instruments in Earth Observation applications. This activity aims at developing direct Al mirror polishing techniques for the manufacturing of aspherical and freeform surfaces and a breadboard shall be manufactured and tested to demonstrate the technology. This activity encompasses the following tasks:- Review of Al substrates and suitable polishing techniques- Manufacturing using the selected techniques on breadboard samples- Performing wave front and roughness measurements- Evaluating the test results and recommendation of possible future improvements and applicationsThe deliverables include a review report, a breadboard that demonstrates the potential of the selected direct polishing technique and a test report including the wavefront error and roughness measurements of the manufactured samplesProcurement Policy: C(2) = A relevant participation (in terms of quality and quantity) of non-primes (incl. SMEs) is required. For additional information please go to:http://www.esa.int/About_Us/Business_with_ESA/Small_and_Medium_Sized_Enterprises/Opportunities_for_SMEs/Procurement_policy_on_fair_access_for_SMEs_-_the_C1-C4_Clauses.Read more

Documents

Tender Notice
Login to view

Netherlands Public Procurement Intelligence

Frequently asked questions

The bid deadline for Direct Aluminum Mirror Polishing Techniques for Free-Form Surfaces was 24 May 2024. Bidding is closed.

This tender has been issued by EUROPEAN SPACE RESEARCH AND TECHNOLOGY CENTRE in Netherlands.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is financed by Other Funding Agencies.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 100698534. The purchaser document reference is 1-12339.

Browse other tenders from Netherlands or search by relevant keywords and CPV classification.