Contract notice: X-ray devices Tender in Hungary - 37602651
Tender notice from Hungary, published on 31 Oct 2019.
Executive Summary
The MAGYAR TUDOMÁNYOS AKADÉMIA ATOMMAGKUTATÓ INTÉZET has issued a Tender notice for the procurement of a Contract notice: X-ray devices in the Hungary. This Tender notice was published on 31 Oct 2019 and is scheduled to close on 29 Nov 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 37602651, while the tender notice number is 515296-2019 and Register on the platform.
Object of the contract X-ray devices Description: Contract notice: X-ray devices Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 33111000, 33111000, 33111000 CPV Description: X-ray devices. Thin Film Examiner Roentgen Diffraction Equipment Reference Number: EKR000377672019 Thin Film Examiner Roentgen Diffraction Equipment Main Site: Bidder's Office (4026 Debrecen, Bem ter 18 / C.) 1 pc Thin Film Examiner Purchase of equipment within the framework of data demanding contract Required technical parameters: Equipment with a minimum 9kW Cu Kαequipped with an anodic roentgen source, the intensity provided below is suitable for high resolution diffraction (XRD), micro diffraction examinations, glazing of surlode-type Roentgen (GISAX) and reflectometry (XRR). rooms should be large, in addition to the equipmentand the vacuum pump also needs to be powered, so it must be an oil-free dry pump ("scroll"). below for meridian options with matching accessories. [Accessories must include somethingyi an in and out optical component that makes the given merestype glass possible, as well as an appropriate data acquisition and evacuation program. apply diffraction data to the sample holder horizontally on the sample holder, with a paste spreading over the glide so thatincoming roentgen beams continuously vary in sample rate ("In-Plane" marine 2Θ / χ), - 2 crystalline monochromator (2-bounds) on both hot side and detector side, chi boiler tube, paralysis beam res, Soller high on the inlet and out (2.5o, 5o, open), collimator (0.15 and 1 mm).the source can be tilted at the optical axis (ω), the detector can be moved at the optical axis (2Θ) and parallel to the sample half when the detector moves perpendicular to the ω -2Θ (2Θ), the sample can be rotated with the optical axis parallel axis (χ) and perpendicular axis to koeruel (φ), - horizontal sample holder, - minimum goniometer measurement: 0 0001 degrees, - goniometerunder paste range: -10 degrees to 150 degrees paste speed of goniometer 0.01 degrees per minute and 100 degrees per minute cohesive freely adjustable x, yz fully motorized table, - x, y in Iran at least 10 mm, z in iran at least 5 mm, - due to the height-adjustable patterns to be tested, you can mount it in z iranpivot and 0-20 mm coezoettable adjustable height reservoirs, - rows remain horizontal throughout the sample. Belorussian replacement liner provides cohesive Bragg-Brentano and Parallel-Lane geometries The products to be transported include a high-density point-to-point parallel beam and a high-intensity point focal beam to change the position of the focal beam. exam in "in-plane" maritime design. ConfigThe acion must include a vacuum pump (turbo and / or dry pre-vacuum pump) to create the vacuum, and a sample piece to adjust the sample table to the table. 8 GB RAM, 1 TB HDD, 2 USB ports, 2 Ethernet interface cards, 4 PCI Card Slots, - 24 "LED Monitor, 1920x1080 Pixels, - Laser Printer: A4 color, 18 ppm black-and-white print speed, 4 ppm color print speed, 800 MHz CPU, 128MB, 2400x600dpi, USB 2.0, LAN. Continued in Section III.1.2. In the procurement procedure, no economic agent, sub-contractor or economic entity may be eligible for certification.eg who is the Kbt. It is subject to the exclusion grounds under - 62 (1) - (2). Pursuant to Article 74 (1) (b), the tenderer shall exclude the tenderer, subcontractor or organization which has accepted the suitability certificate from which the exclusion was made in the course of the procedure. (1) to (3) of Section 67 and Section 321/2015. (X. 30.) Korm. (1) or Article 3 (2) of Decree-Law No 1/2003 and the economic operator, as appropriate, certifying that he is not a party by submitting the Single European Cooperative Document Kbt. Article 62 (1) and (2).attempting to insert the EEKD in a different way, kueloen-kueloen [a. (X. 30.) Government Decree on Section 3 (3)]. (X. 30.) Government Decree No. 321/2015. (X. 30.) Korm., And the informant who is not established in Hungaryzerin is provable. The Kbt. With respect to Article 62 (1) (k) (kb), the Offeror shall make a statement regarding the prevention and suppression of the financial and terrorist financing of LY 2017. Section 3 (38) (a) to (b) or (d) of the Tender, the tenderer must also attach a statement to the Kbt. Section 62 (1) (k) kc) al The organization that certifies the suitability is only able to submit the offer to the Kbt. Section 62, Exclusion Causes of Insufficient Justification for Failure [321/2015. (X. 30.) Korm. In view of the provisions of Article 67 (4), it shall be prudent to make a declaration stating that he does notfor the purposes of the Kbt. 62. Subclaims are excluded from the scope of the exclusion grounds under Rule 62. The Kbt. Submission of the certificate pursuant to - 67 (4) iranyado 321/2015. (X. 30.) Government Decree No. 151/2015. (X. 30.) Gov. Decree 321/2015. (X. 30.) Government Decree 14.es Section 16, further to the Kbt. Possibility of cleaning in accordance with - 64. (X. 30.) Gov. Decree (X. 30.) on the basis of Article 19 (1) (a) of the Government Decree, dated at least on the basis of the following content, when it's goodif and when you started your activity, if this information is available: - the penny / penny billing penny (s), - the penny billing commencement date, - the bill 12 months prior to the call Has there been a pool in a row for more than 15 calendar days, and if so, the date and duration.in line with the exposure of the payment service provider for the year 2009 LXV. - 2. point 25. of the Kbt. Section 67 para.changing a 321/2015. (X. 30.) Government Decree 19 (7). Point II.2.4. accurate alignment of optical axis light. Roentgen source, sharp on inside and out, detector and sample holdergetlenuel movable motorized, slidable in optical axis. The data of all configured optical configurations on the controller computer is removed. The individual parameters and parameters of the optical components (eg type of optical res, width of the input and detector side, type of analyzer crystals, etc.) are continuously controlled by the controller computer. under - Mistakes with the firmware / driver software included: - MS Windows operating system based software for device management and MS Office suite for creating reports on marine results, - software / hardware failure during warranty period, it can be reinstalled in any number of cases, - the immersion program should have ita "guidance" function for configuring marine configuration and parameters according to user requirements; the program should have predefined nautical configurations, which, depending on the nature of the sea, should incorporate the optical system ramps and parameters (eg how to adjust the optics, how to adjust the position of the sample); that dareby selecting the most appropriate package for your task, the user should be able to verify the optical configuration, get the help of the tamogato function to select and configure the correct configuration, and after the automatic positioning of the optical system and the sample, control program should be kepes automatically tune the optical elements, - select the appropriate optical component when selecting a particular type of merge, and replace, if necessary, the elements remaining from the previous merge, - allow all users to own, automate workflow, for data evasion programs 1. Co-acquisition documents are the suggestioni can be reached in the ECR from time to time 2. The requirements for documents transmitted in the ECT, for claims against electronic declarations in the ECT and for electronic declarations in case of representation are set out in Act 424/2017. Reg. 10-13. - 3. For the use of the ECS, the 424/2017. Reg. Section 6, Wedonline registration required. 4. In the case of a varied registration request, which has already been submitted to the Company, but has not yet been declared, it is subject to Government Decree 321/2015. (X.30.) Shall be dealt with in accordance with Article 13. In the event that the offeror is not in the process of changing the listing, he / she shall make a statement in his / her offer. The tenderer must attach a statement to the Kbt. Article 66 (2) 6. The tenderer must attach a statement to the Kbt. Section 66 (6) (a) and (b). The negative statement (s) are also attached. If the bidder is a Kbt. Pursuant to Article 65 (7) and (9), he intends to proceed and attach the Kbt. The declaration provided for in Article 65 (7) and other documents. The offer was a shaky buckleThe technical description (s) of the different rooms must be read and accepted by English. In the above, the tenderer must specify the manufacturer and type of goods to be delivered, or, if the type is not definable, the article number and, where applicable, the country of origin (country). The timeline is 321/2015. (X. 30.) Kormdraws the attention of the tenderer to the fact that the term of service is the conditions and attestation of the tenderer's financial, technical, and professional competence in accordance with Decree 321/2015. (X. 30.) Korm. Stricter terms for the Penzuegy statementrelated to the references. Suggestions for the procedure of the failure potential of the Kbt. - 71. 11. Bidding power does not specify a term assurance in this procedure. 12. Bidder does not apply Kb in this procedure. - 75 (2) (e). Bidding does not affect contract performance as a project partnerand does not make it possible. The score is 0-100 points. In terms of bid value, the best bid (with the smallest bid) for the clock is given the maximum score, the next bid for the clock uses the inverse golden rating of the clock. The qualitative aspects of selling koezuel are the technical equipment to be suppliedThe criteria for the evaluation of the parameters in the case of the minimum bid are given the minimum score that can be distributed, the best value for the expected level or for the more favorable ones, the best of the two words is the highest price of gold . First Qualthe lower markings are higher in terms of judgment, while the higher markings in terms of quality are more advantageous in terms of timing than the qualitative criteria of other technical parameters. In the case of toebletter sales, the bidder who does not claim to be the roentgen source anode over the competing 12-month-old toadletal, that is to say 0 honap toebbletjotallas gets the minimum score, while the offer that contains the expected best level (24 months) or better megayalan gets the maximum score, while the two first-ranked koezoetti megajanlot earns points in the same distance as gold. A detailed description of the score is given in the co-purchasing document for keruel Internet address (URL): http://www.atomki.hu
The bid deadline for Contract notice: X-ray devices was 29 Nov 2019. Bidding is closed.
This tender has been issued by MAGYAR TUDOMÁNYOS AKADÉMIA ATOMMAGKUTATÓ INTÉZET in Hungary.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 33111000 - X-ray devices.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 37602651. The purchaser document reference is 515296-2019.