Contract notice: Weighing machinery Tender in Poland - 35493227
Tender notice from Poland, published on 14 Aug 2019.
Executive Summary
The MIEJSKIE PRZEDSI?BIORSTWO OCZYSZCZANIA W M.ST. WARSZAWIE SP. Z O.O. has issued a Tender notice for the procurement of a Contract notice: Weighing machinery in the Poland. This Tender notice was published on 14 Aug 2019 and is scheduled to close on 27 Aug 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 35493227, while the tender notice number is 384784-2019 and Register on the platform.
Object of the contract Weighing machinery Description: Contract notice: Weighing machinery Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 42923100, 42923110, 42923100, 42923110 CPV Description: Weighing machinery. Balances. Delivery and assembly of new dynamic weighing systems with dust-free vehicles along with the service Reference Number: DZA.ZOZ.27.27.2019.LK The subject of the order is the delivery and assembly of factory-new dynamic weighing systems with dust-free with service, broken down into the tasks set out below. Main Site: Employer will be successively dosshielded vehicles covered by the said order to the Contractor's service, located in the Capital City of Warsaw Warsaw or within a distance of 20 km from administrative borders The subject of the contract is the delivery and assembly of 10 new sterile vehicles, brand new dynamic weighing systems with service, in accordance with the Employer's requirements set out in the ToR. The subject of the contract includes: 1.Dopond and system installation on dust-free vehicles. 2.Legalisation of the weighting system granted by the measure administration authority or an entity authorized to certify verification. 3.Training to the extent provided by the Employer. The dynamic weighing system (hereinafter the weighing system) is an automatic balance for single class loadsY (b): weighing computer, measuring cells, triggering sensors, cabling connecting the sensors with the computer, fastening elements. The Employer informs that the system will be mounted on vehicles with dust-free bodies with a capacity of 20.2 m3, throw-inSK200. The enclosure is adapted to the assembly of a weighing system with the use of DigiSens dynamic weighing cells; 3. The use of DigiSens dynamic weighing cells, or other cells with dimensions corresponding to the factory-prepared fixings, does not cause loss of CE. If the Contractor uses weight sensors that do not match the factory mounts, he will be required to obtainCE approval after system installation. The Employer excludes incurring any additional costs associated with the adaptation of the body (each separately) to the assembly of the offered weighing system or obtaining the CE mark. 4.The weighing system is to be adapted to the device with rear hopper with a comb mounted on the crossbeam and arms folded into containers with volume 120 - 1100 L. Single weighingmnika is to take place during the process of emptying the container through the hopper, without having to interrupt it and without having to extend the container emptying cycle. 5. The weighing system must meet the CleANopen protocol requirements. The Contractor will be obliged to make a statement that the offered weighing system meets the CleANopen protocol requirements and that he will provide the Ordering Party on the day the vehicle is picked upafter assembly of the system, protocol and documentation of its use (implementation in the installed weighing system). 6. The degree of environmental protection of the system components is IP66 or higher. 7. The accuracy of the weighing system measurement should not be worse than: 1) When loading containers 2- wheeled parameters require a verification and readout plot within the weight range should be e = d≤1kg, and after exceedingand for a weight of 50e, the scale should automatically change to e = d≤2kg, max range ≥ 150 kg. 2) When loading 4-wheel containers, the parameters verification and reading range should be e = d≤5kg, max range ≥ 500 kg. 3) It is allowed to switch the verification scale and max range. automatically following on the basis of sensors detecting whether loading takes place on the basis ofloading when using a comb mechanism or loading arms. 8. The accuracy of the measurement refers to the determination of the net weight (ballast) which is the difference between the gross weight and the tare weight. 9. The load sensors must be made of stainless steel (without aluminum) and resistant to action of chemicals used to maintain roads and those present in the received waste. 10. System wmust be 100% overload possible. Note! Continuation of section II.2.4) is in section: III.1.1.) [Note! Continued from section II.2.4) for Part No. 1 - Tasks 1]: 12. The weighing system must have: an internal clock with date and time, which must have power backup and operate independently of the main power supply: a display showing the current readings of the internal clockand the value of the last weighing; non-volatile internal memory allowing to store information about at least 10 thousand recent weighings, with the possibility of easy reading on a PC. The Contractor on the day of collecting the vehicles after assembly will provide the Employer with instructions for reading the memory of the balance and an adapter (if necessary) enabling its reading on a PC via USB A.The following must be stored in the memory: date and time of weighing, unique weighing identifier, net weighing value, information on the mode of operation of the weighing system (if automatic switching takes place as per point 9 (3) Part II of the ToR). Lack of power supply for the balance cannot affect the contents of the memory. 13. The weighing system must have an EU type-examination certificate in accordance with 2014/32 / UE, homologation at least in the scope of a weighing computer (so-called CE mark). 14. The weighing computer must meet the standards: EN 61326-1, EN 61000-3-2 and 3, have calibration capabilities in accordance with OIML R51. The measuring cells must comply with OIML R60. [Note! Continued from section II.2.4) for Part 2 - Tasks 2]: 12. The weighing system must have: an internal clock with date and time, which must be supportede power supply and operate independently of the main power supply: display showing current internal clock and last weighing value; non-volatile internal memory allowing to store information about at least 10 thousand recent weighings, with the possibility of easy reading on a PC. The Contractor on the day of collecting the vehicles after assembly will provide the Employer with instructionsweighing memory reading and adapter (if necessary) enabling its reading on a PC via USB A. The memory must contain: date and time of weighing, unique identification of weighing, net value of weighing, information in what mode the weighing system worked (if automatic switching takes place according to point 9 point 3) Part II of the ToR). No balance power supplymay affect the contents of the memory. 13. The weighing system must have an EU type-examination certificate in accordance with 2014/32 / EU, approved at least for the weighing computer (so-called CE mark). 14. The weighing computer must meet the standards: EN 61326 -1, EN 61000-3-2 and 3, have calibration capabilities in accordance with OIML R51. The measuring cells must comply with OIML R60. [Note! Continued from section II.2.4) for Cpart no. 3 - Tasks 3]: 12. The weighing system must have: an internal clock with date and time, which must have power backup and operate independently of the main power supply: a display showing the current readings of the internal clock and the value of the last weighing; non-volatile internal memory allowing to store information about at least 10 thousand recent weighings, with the possibility of its prlast reading on a PC. The Contractor on the day of collecting the vehicles after assembly will provide the Ordering Party with instructions for reading the balance memory and an adapter (if necessary) enabling it to be read on a PC via USB A. The memory must contain: date and time of weighing, unique identifier of weighing, value net weighing, information on which mode of operationweighing system (if automatic switching takes place according to point 9 point 3) Part II of the ToR). Lack of power supply for the balance cannot affect the contents of the memory. 13. The weighing system must have an EU type-examination certificate in accordance with 2014/32 / EU, at least approved for the weighing computer (so-called CE mark). 14. The weighing computer must meet standards: EN 61326-1, EN 61000-3-2 and 3, have the capacity of calvibration in accordance with OIML R51. The measuring cells must comply with OIML R60. [Note! Continued from section II.2.4) for Part No. 4- Tasks 4]: 12. The weighing system must have: an internal clock with date and time, which must have power backup and operate independently of the main power supply: a display showing the current readings of the internal clock and the value of the last weighing; nonvolatile memoryinternal desire allowing the storage of information on at least 10 thousand recent weighings, with the possibility of easy reading on a PC. The Contractor on the day of collecting the vehicles after assembly will provide the Employer with instructions for reading the balance memory and an adapter (if necessary) enabling it to be read on a PC via USB A. The memory must contain at least: dateand time of weighing, unique weighing identifier, net weighing value, information in what mode the weighing system worked (if automatic switching takes place according to point 9 point 3) Part II of ToR). Lack of power supply for the balance cannot affect the contents of the memory. 13. The weighing system must have an EU type-examination certificate in accordance with 2014/32 / EU, at least computer-approvedweighing machine (so-called CE mark). 14. The weighing computer must meet the standards: EN 61326-1, EN 61000-3-2 and 3, have calibration capabilities in accordance with OIML R51. The measuring cells must comply with OIML R60. 1. Whenever the term Act or Public Procurement Law is used in this announcement, without specifying which Act is concerned, it refers to the Act of 29.1.2004 Public Procurement Law (textone. OJ from 2018, item 1986 as amended). 2. In accordance with art. 24aa section 1 of the Act, the Awarding Entity will first evaluate the offers and then examine whether the contractor whose offer has been assessed as the most advantageous is not subject to exclusion. If the Contractor referred to above evades the conclusion of the contract, the Employer may examine whether it is not subject to exclusion The Contractor who submitted the bid will be rated the highestof the remaining offers. 3. Statements and documents required by the Employer to be submitted by each Contractor with the offer: 3.1. a document containing current data as at the date of submitting the offers, confirming that the offer was signed by a person authorized to represent the Contractor, if the offer was signed by a person other than the one authorized in the registration documentContractors (e.g. power of attorney, civil partnership agreement). 3.2. The Single European Order Document (EAT) with the content compliant with Annex 2 to the Commission Implementing Regulation (EU) 2016/7 of 05 January 2016 establishing a standard form, completed in accordance with the guidelines set out in point 9 of the SETC. 4. In addition, the offer should consist of: 4.1. completed electrical formavailable and generated through the Platform; 4.2. completed Form "A" according to the specimen set out in Part III of the ToR, for a given Task; 4.3. the original tender bond in accordance with the provisions of point 11.4. of the ToR; 4.4. if the offer contains the secret of the enterprise of evidence referred to in point 12.9.3 SIWZ; 4.5. Declarations and documents listed in point 7.1. SIWZ. 5. The documents relate tobelonging to the same capital group. Within 3 days from the date of submitting (posting on the Platform) information from the opening of offers, the Contractor is obliged to provide the Employer (without request) with a declaration of belonging or non-belonging to the same capital group referred to in art. 24 paragraph 1 point 23 of the Act - according to the template set out in Annex 1 to the ToR. withwith the submission of a statement, the Contractor may provide evidence that links with another Contractor do not lead to a distortion of competition in a public procurement procedure. 6. List of statements or documents to be provided by the Employer at the request of the Employer in order to confirm compliance with the conditions for participation in the procedure, compliance with the offered supplies specified requirementsby the Employer and the lack of grounds for exclusion from the procedure: 6.1. List of statements or documents confirming compliance with the conditions for participation in the procedure. Not applicable 6.2. List of statements or documents confirming that the offered deliveries meet the requirements specified by the Employer: 6.2.1. statement confirming the requirements regarding the subject of the order according to the modelspecified in Annex 2 to the ToR. 6.3. List of statements or documents confirming the lack of grounds for exclusion from the proceedings: 6.3.1. Information from the National Criminal Record in the scope specified in art. 24 paragraph 1 item 13, 14 and 21 of the Act, issued not earlier than 6 months before the deadline for submitting bids; 6.3.2. documents and statements specified in - 5 point 2 6 and 9 and the correspondingand in - 7 para. 1 3 and - 8 section 1 of the Regulation of the Minister of Development of 26.7.2016 on the types of documents that the Employer may request from the contractor in the procurement procedure (Journal of Laws of 2016, item 1126 as amended) . 7. The Awarding Entity will exclude Contractors from the proceedings in relation to which the conditions for exclusion referred to in art. 24 paragraph 1 and item 5 points 1 and 8 of the Public Procurement Law, subject to art. 24 paragraph 8 and 9 of the PPL Act Internet address (URL): www.mpo.com.pl
The bid deadline for Contract notice: Weighing machinery was 27 Aug 2019. Bidding is closed.
This tender has been issued by MIEJSKIE PRZEDSI?BIORSTWO OCZYSZCZANIA W M.ST. WARSZAWIE SP. Z O.O. in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42923100 - Weighing machinery, 42923110 - Balances.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 35493227. The purchaser document reference is 384784-2019.