Contract notice: Vehicle bodies for goods vehicles Tender - 42701228
Tender notice from Switzerland, published on 07 May 2020.
Executive Summary
The ARMASUISSE ACHATS ET COOPÉRATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Vehicle bodies for goods vehicles in the Switzerland. This Tender notice was published on 07 May 2020 and is scheduled to close on 02 Jun 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42701228, while the tender notice number is 213524-2020 and Register on the platform.
Key facts
Summary
Contract notice: Vehicle bodies for goods vehicles
Object of the contract Vehicle bodies for goods vehicles Description: Contract notice: Vehicle bodies for goods vehicles Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Restricted procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 34211300, 34211300, 34211300 CPV Description: Vehicle bodies for goods vehicles. Interchangeable systems for 6x6 trucks In accordance with the vehicle replacement plan, two vehicles equipped with an interchangeable system must be acquired for administration. This system represents an individual solution and must not be compatible with the batch 1 system. One of the specifics of this interchangeable system resides in the fathat two different base chassis / vehicles are used. A chassis fitted with a snow blade attachment plate is prepared for winter service while the other chassis must also be fitted with a crane (not interchangeable). Interchangeable systems for 6x6 truck chassis, incl. . modification of existing interchangeable chassis. Evidence and supporting documentsStudy listed below must be provided in full with the request to participate, without restrictions or modifications, otherwise it will not be entered into on the request to participate. CAP1: a) Respect for the principles governing the procedure The tenderer certify that he and the third parties he solicits (subcontractors and suppliers) comply with the terms and conditionst the procedure in accordance with the document (appendix 1.1.1) of the Confederation`s purchasing conference (CA). b) Additional proof of the respect of equal pay between women and men Bidders and their prime subcontractors ranks, each with more than 50 employees, must demonstrate, beyond the document, how they examined their salary practice and thate the tolerance threshold of 5% is respected within the framework of the market. CAP2: declaration of the tenderer CAP3: extract from the prosecution register and the commercial register or equivalent official act issued by a foreign authority which certifies that the tenderer `` no tax debts or linked to unpaid social security contributions (no older than three months, the date of deposit of the`being decisive). CAP4: the tenderer certifies that he assumes overall responsibility, that is to say in particular that the tenderer is the sole contractual partner of the adjudicating body. Any persons involved must be indicated in Annex 1.1 with the roles and functions assigned to them. CAP5: certificate of a single contact address (singlepoint of contact SPOC) for all business processes. CAP6: the tenderer certifies that he has a quality management system (ISO 9001 or equivalent). CAP7: lot 1: the tenderer certifies that he will put available production capacity and appropriate specialized staff to produce and deliver the required quantities (15 interchangeable systems, including chassis inchangeable with structure) within a maximum period of fifteen months from the date of validation of serial production. In case of non-compliance, the adjudicator reserves the right to terminate the contract (article 11 LMP) while asserting a contractual penalty. CAP7: lot 2: the tenderer certifies that he will make available the production capacity and the specialized staffsuitable for producing and delivering the two interchangeable systems, including the corresponding interchangeable chassis, within a maximum period of ten months from the date of delivery of the chassis. In case of non-compliance, the adjudicator reserves the right to terminate the contract (article 11 LMP) while asserting a contractual penalty. CAP8: the tenderer certifies that he has`` at least one maintenance center in Switzerland (specify location) able to carry out all repair and maintenance work on the planned interchangeable systems. CAP9: the tenderer certifies that he will be able to provide repair and maintenance services (spare parts included) in Switzerland for the entire period of use of the system (at least fifteen years fromter of delivery of the last system). CAP10: the tenderer certifies that he has a stock of spare parts in at least one maintenance center in Switzerland (specify the location). CAP11: the tenderer certifies that `` he knows the Iveco conversion directives, that he has online access to it and that he will correctly apply the instructions in the event of possible assembly of the systemsmy interchangeable. CAP12: the tenderer certifies that the equipped vehicles fully comply with the Swiss prescriptions for admission to road traffic. Confirmation that the tenderer informs himself independently of the planned changes in terms of admission requirements for road traffic and that the interchangeable systems and superstructures of truck chassis comply with the latest requirements. CAP13: the tenderer certifies that he has his own design office with at least three qualified specialists. CAP14: the tenderer certifies that he is able to develop and to provide all written documentation, operating instructions and documentation relating to spare parts in German, French andt Italian. The documents must be provided with the delivery. CAP15: the tenderer certifies that he will provide the principal with the information necessary for the identification of the parts in the form of a complete list with the basic logistical data in accordance with annexes 1.4 and 4.2 in good time at the start of serial production. At the end of production, the informationmust be available in their entirety. CAP16: lot 1: the tenderer certifies that he has three references of interchangeable systems already produced for vehicles with a total weight greater than 16 t. CAP16: lot 2: the tenderer certifies that `it has at least two references of interchangeable systems already produced for vehicles with a total weight greater than 16 t. CAP17: lot 2: the tenderer certifies that he has at least two references of crane superstructures already assembled in his company with an interchangeable system specially produced for vehicles with a total weight greater than 16 t. CAP18: lot 2: the tenderer certify that he has at least two references of interchangeable skips (multi-skips) already assembled in his business atwith an interchangeable system specially produced for vehicles with a total weight greater than 16 tonnes. CAP19: lot 2: the tenderer certifies that he is the manufacturer, the official importer or the service / distribution partner of the crane CAP20: lot 2: the tenderer certifies that he is the manufacturer, the official importer or the service / distribution partner ofthe multi-skip proposed. Partial offers are accepted. Conditions for countries which have not acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only to contractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women. Other information: according to documents. Indication of remedies: in accordance with article 30 LMP, the present publication can be attacked, within a period of 20 days from its notification, at the Federal Administrative Court, PO Box, 9023 St. Gall. The appeal brief, to be presented in two exampleslaires, indicate the conclusions, reasons and means of evidence and bear the signature of the appellant or his representative; A copy of this publication and the documents invoked as evidence, when available, will be attached to it. Important for respecting the deposit deadline: a) in case of hand delivery to Armasuisse (Guisanplatz 1 administrative center): when handing over to, Guisanplatz 1, 3003 Berne, for the attention of CC WTO Armasuisse, the following points must be observed: - the tenderer must register at the main box, Guisanplatz 1, indicating the title of the project (see figure 7.1). It will then be redirected to the; - the discount must be madectuee at the latest at 3.30 p.m. on the day of the delivery date mentioned in point 7.3, against delivery of an acknowledgment of receipt by the Ramp Management; - opening hours of the ramp management: 8.30 a.m. - 4 p.m. (outside during these hours, no offer can be made); b) shipment by post: the postage stamp or barcode of the service provider carrying out the shipment is decisive (thethe stamp affixed by the company is not authentic); c) in the case of delivery to a diplomatic or consular representation of Switzerland: the certificate of receipt issued by the representation in question is authentic. The acknowledgment of receipt must be sent to the electronic address indicated in section 1.2 at the latest until the deadline for submission of the request to participate. Remarks(Delay wishes to ask questions in writing) if questions appear during the preparation of the request to participate, they can be asked exclusively in the form of anonymous questions in the frequently asked questions on the simap.ch site Each question must be asked separately in the forum (one question per entry). Answers are given in the frequently asked questions ifte simap.ch All questions and answers can be consulted by all candidates who have obtained the documentation for the call for tenders. The candidate is responsible for finding out about the questions and answers appearing in the frequently asked questions. National reference publication: SIMAP of 5.5.2020, doc. 1129739. Delai would like to ask questions by emailit: 28.5.2020. The participation documents for the selection phase are available from 5.5.2020. Conditions for obtaining the tender dossier: the documentation can be downloaded exclusively from the platform electronic form www.simap.ch - section. To do this, you must first register in the project in question and then you can access thedocumentation using the login and password that you will receive by email. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Vehicle bodies for goods vehicles was 02 Jun 2020. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPÉRATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 34211300 - Vehicle bodies for goods vehicles.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 42701228. The purchaser document reference is 213524-2020.
This tender falls under Materials and Products in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.