Expired Tender Finland ICB TOT Ref. 33211115

Contract notice: Upright-type freezers Tender in Finland - 33211115

Tender notice from Finland, published on 23 May 2019.

Executive Summary

The TERVEYDEN JA HYVINVOINNIN LAITOS has issued a Tender notice for the procurement of a Contract notice: Upright-type freezers in the Finland. This Tender notice was published on 23 May 2019 and is scheduled to close on 24 Jun 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 33211115, while the tender notice number is 239211-2019 and Register on the platform.

Key facts

Summary
Contract notice: Upright-type freezers
TOT Ref. No.
33211115
Document Ref. No.
239211-2019
Country
Finland
Notice type
Tender
Competition
ICB
Publication date
23 May 2019
Bid deadline
24 Jun 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Upright-type freezers
Description: Contract notice: Upright-type freezers
Authority Type: National or federal Agency/Office
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 39711123, 39711120, 39711123, 39711120
CPV Description: Upright-type Freezers.
Freezers.
Deep Deep Freezers
The Department of Health and Welfare (THL) acquires deep-freeze refrigerators and the most common grain models centrally. Approximately 4, 15 copies of the average retailer are purchased each year as single orders. Rakes are ordered as required, irrespective of the Mae Stage of the ordered freezers. The purchase period is three (3) v two (2) v optionsimmersion requirements
Freezers
The frozen freezer pitaeae reaches -80 C cold and the setting tray space should be sawed -55C -85 C.
The offered freezer should be about 700 l in size (/ - 40 liters (l).
The freezer should fit in a 118 cm wide open door.The maximum height of the stent is 2 m to allow the freezer to fit into the elevator.
The freezer provided must be a cabinet model.
The freezer must have internal doors so that the room air does not escape effectively inside the freezer. The siding doors should be two (2) in the swing door, so that you do not always have to open the freezer compartment of the freezer all at once.
The freezer should have a supportive pyro (pyo)batches should be covered by the freezer offset).
The freezer should have a saw blade shelf height.
The freezer should be equipped with a pickup function that detects the room and can be used to control the device, for example, to set the trapping limits, etc.
The freezer should be recorded and stored (not only its real-time log space).
There must be a recording of events in the freezerand pickup (for example, door openings, etc.).
The freezer should be lockable with a single lock.
The freezer in the freezer must have a battery-backed flip-flop system, which can be connected to the (fixed) relay-hacking system
where the device can be sawn on the slope delay and the sloping floor space of the storage room.
The freezer to be offered must have a slab export for a separate lumber storage probe
ceiling diameter, that is, for a flat pallet feeder, eg pt100 / pt1000. / 700 l / 24h -80 C in the lambs room sawn on the day (TEM: njgauge) at normal room temperature.
Provide the supplier with the energy consumption kWh / 700l / 24h of the freezer to be offered.
The freezer provided must have the CE mark, and the equipment must recharge refrigerants that are acceptable to the environment.Turku, Tampere).
The delivery time must be three (3) weeks from the order.
The delivery time for the most common and essential parts of the device must be up to three (3) weeks after the order. (1) Week
Raekit
The offer should be priced on a freezer suitable for the freezer, which should be as efficient as possible in the freezer, which should be metallic, in the case of a cracker and in the normal process, there should be a handle from which the grain can be lifted. and the shelf is fastened on both flies r
The shelves of the box to be offered must be such that the declared box size fits as tightly as possible into the hollow space:
box size: 135 mm x 135 mm x 50 mm.
Internet address (URL): http://www.thl.fi/

Documents

Tender Notice
Login to view

Similar tenders

Finland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Upright-type freezers was 24 Jun 2019. Bidding is closed.

This tender has been issued by TERVEYDEN JA HYVINVOINNIN LAITOS in Finland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 39711123 - Upright-type freezers, 39711120 - Freezers.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 33211115. The purchaser document reference is 239211-2019.

See the Similar Tenders section on this page or browse other tenders from Finland.

This tender falls under Materials and Products in Finland. Suppliers in these sectors can track similar Finland tenders using CPV-based alerts.