Contract notice: Threading or tapping machines Tender - 23001894
Tender notice from Poland, published on 04 May 2018.
Exeutive Summary
The LARKIS SPÓ?KA Z OGRANICZON? ODPOWIEDZIALNO?CI? has issued a Tender notice for the procurement of a Contract notice: Threading or tapping machines in the Poland. This Tender notice was published on 04 May 2018 and is scheduled to close on 19 Jun 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 23001894, while the tender notice number is 193003-2018 and Register on the platform.
Object of the contract Threading or tapping machines Description: Contract notice: Threading or tapping machines Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 42622000, 42600000, 42622000, 42600000 CPV Description: Threading or tapping machines. Machine tools. Selection of the Contractor in the scope of delivery and installation and configuration of a brand new device constituting a wire erosion center with full accessories, equipment and software The subject of the order is to select the Contractor for delivery and installation and configuration of the brand new device constituting a wire centelectrical discharge rum with full equipment, accessories and software for the production and laboratory facility located on the real property which is the registered office of Larkis Sp. z o.o. in Dobczyce (32-410) at ul. Obwodowa 4, regarding the Project co-financed from the European Union funds, under Measure 2.1 Support for investment in infrastructure B R of Program enterprisesperception of Intelligent Development 2014-2020 co-financed from the centers of the European Regional Development Fund. The subject of the contract is to appoint the Contractor for delivery and installation and configuration of a brand new device constituting a wire-based electrical discharge center with full equipment With equipment and software for the production and laboratory facility being realizedlocated on the real estate which is the registered office of Larkis Sp. z o.o. in Dobczyce (32-410) at ul. Obwodowa 4, regarding the project co-financed from the European Union funds, under Measure 2.1 Support for investment in infrastructure B of enterprises of the Intelligent Development Operational Program 2014-2020 co-financed from the centers of the European Regional Development Fund.and offer the subject of the order in accordance with the requirements of the Ordering Party set out in the ZiS, i.e. the technical and functional requirements indicated below, as well as the given parameters or their ranges. Wire Electroerosion Center. 1. Axle travels: a) - X min 520 mm b) - Y min 320 mm c) - With min 400 mm 2. U and V travels min 520 mm x 320 mm 3. The body of a cast iron machine or other material that provides a hightiveness and stability 4. Optical rulers with a resolution of 0.050 μm - 0.01 μm in the X, Y, U, V, Z 5 axes. X, Y, U and V axes simultaneous control 6. Independent lower and upper heads enabling cutting at an angle of up to 30 7. The possibility of loading a detail with the dimensions of max -1 200 x 650 x 400 mm (tolerance -2%) 8. Table load capacity not less than 1 000 kg 9. Dimension of the tableworking time not less than 850 x 550 mm (tolerance -2%) closed frame 10. Speed of X, Y, U and V axes min 2 m / min up to max. 4 m / min, including software hardware, not requiring replacement of parts after collision 11. Anti-collision protection on all X, Y, U and V 12 axes. Protection system against micro-cracks and deposits 13. Large touch screen 14. Handheld remote control for handling 15. CAD / CAM software 16. Automatic generation of machining technologies 17. Interface in Polish 18. Technological base for cutting materials: titanium, aluminum, copper, carbide, PCD 19. Expert modules for saving electricity and wire consumption 20. Expert modules allowing to obtain high efficiency, accuracy and with varying heights no trace on-lateral surface 21. The ability to work with wires with a diameter ranging from min 0 0.07 to max 0.33 mm 22. Required achievement of the final roughness in the range from 0.05 μm Ra 0.08μm Ra 23. Automatic threading and wire renaming 24. Fully digital liquid-cooled generator 25. Cutting speed at least 340 mm / min 26. Thermal stabilization of a bathtub with a dielectric / external refrigerator-with a power of min 6 [kW]. 27. Automatic restart after power failure 28. Wire guides with diamond-free 0 0.25 mm wire / on device equipment / 29. Remote service support online 30. The need to cooperate with the Mega Cad 2016 software. Contractors may participate in the proceedings, who are not subject to exclusion from the procurement procedure, and from the procurement procedureand Contractors who are related by capital or person with the Employer are excluded, while capital or personal links should be understood as interconnections between the Employer or persons authorized to commit on behalf of the Employer or persons performing on behalf of the Employer activities related to the preparation and conduct of the selection procedure Contractors aContractor, consisting in particular of: 1 participating in the company, as a partner of a civil partnership or a personal company, 2 owning at least 10% of shares or shares, 3 performing the function of a member of the supervisory or management body, proxy, attorney, 4 remaining in marriage, in a relation of affinity or affinity in a straight line, second degree affinity orsecondary line ovings in the lateral line or in relation to adoption, care or guardianship. The contractor must be in an economic or financial situation allowing for the execution of orders. The Ordering Party does not specify in this case a detailed description of the condition . Internet address (URL): www.larkis.pl Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Threading or tapping machines was 19 Jun 2018. Bidding is closed.
This tender has been issued by LARKIS SPÓ?KA Z OGRANICZON? ODPOWIEDZIALNO?CI? in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42622000 - Threading or tapping machines, 42600000 - Machine tools.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 23001894. The purchaser document reference is 193003-2018.