Contract notice: Temperature or humidity surface Tender - 36839684
Tender notice from Switzerland, published on 03 Oct 2019.
Executive Summary
The ARMASUISSE PURCHASING AND COOPERATIONS has issued a Tender notice for the procurement of a Contract notice: Temperature or humidity surface observing apparatus in the Switzerland. This Tender notice was published on 03 Oct 2019 and is scheduled to close on 11 Nov 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 36839684, while the tender notice number is 465347-2019 and Register on the platform.
Key facts
Summary
Contract notice: Temperature or humidity surface observing apparatus
Object of the contract Temperature or humidity surface observing apparatus Description: Contract notice: Temperature or humidity surface observing apparatus Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 38126300, 38126300, 38126400, 38930000, 38126300, 38126400, 38930000 CPV Description: Temperature or humidity surface observing apparatus. Wind surface observing apparatus. Humidity and moisture measuring instruments. EMER-Met The aim of the tender is to provide state-of-the-art measurements of wind, temperature and humidity for the safety of Swiss population. Using the latest remote sensing technology, the measurements will be performed at three sites: Payerne, Schaffhausen and Grenchen, from the ground to the middle of the troposphere. These instruments will be operated 24/7. Doppler lidars. When the tender is submitted, the suitability criteria and required supporting evidence listed below must be confirmed, appended and substantiated in full without any reservations or modifications; otherwise the bid will not be considered. E1 supplier self-declaration: fully completed and duly signed supplier self-declaration (Appendix 1.1). E2 overall responsibility for this project: the vendor confirms to assume overall responsibility for the present project, i.e. in particular that the vendor is the sole contracting party of the awarding authority. Any participants must be listed with their assigned roles and functions in Appendix 1.1. E3 contact person for business transactions: proof of a single point of contact (SPOC) for all business transactions. The project manager in charge has a background in electrical engineering, atmospheric sciences, meteorology or physics at university level. The project manager in charge is fluent in French or English. The project manager in charge shall be certified in project management, at least at the level of a junior project manager. E4 (a) compliance with procedural principles: the vendor confirms that he himself and the third parties (subcontractors) he consults comply with the procedural principles set out in the self-declaration sheet (Appendix 1.1.1) of the Federal Procurement Conference of the Federal Banking Commission; (b) additional proof of compliance with equal pay for men and women: vendors with more than 50 employees and their first tier subcontractors each with more than 50 employees must, in addition to the self-declaration sheet, demonstrate how wage practice has been reviewed. E5 excerpt from the debt collection and commercial registers: excerpt from the debt collection and commercial register or equivalent recognised document from abroad proving that the provider has no tax or social security debts (not older than 3 months, date of entry is decisive). E6 experience: the vendor has experience in orders that are comparable to the present order. A contract is comparable if it fulfils the services and requirements set out in the specifications and fulfils the criteria set out in Appendix 1.2, References. The vendor shows this experience on the basis of at least 2 references. E7 draft contract: the vendor confirms the unrestricted acceptance of the draft contract as per Appendix 4.0. E8 quality management: the vendor (manufacturer/general importer) has a quality management system according to ISO 9001 (latest edition) or equivalent. Partial offers are permitted. Conditions for countries not party to the WTO agreement: none. Negotiations: none. The bidder is instructed to submit its best offer. Basic procedural principles: the client only awards public commissions for services in Switzerland to tenderers who comply with job security regulations and the conditions of work for employees, and provide equal payment for men and women. Procedures for appeal: pursuant to Art. 30 of the Federal Act on Public Procurement, an appeal against this publication may be filed within 20 days since notification in writing in an official language of Switzerland to the Federal Administrative Court, Postfach, 9023 St. Gallen. The appeal petition must be submitted in duplicate and must contain the application, the grounds of appeal with details of the evidence and the signature of the appellant or his agent; a copy of the present publication and documents cited as evidence must be attached, provided they are in the appellant's possession. Deadline/Remarks: Place of submission: cf. para. 1.2 The following must be observed with regard to the deadline for submissions: (a) if delivered to armasuisse: if submitted to the reception desk at the armasuisse administrative building, Kasernenstrasse 19, 3003 Bern, F.A.O. CC WTO armasuisse, the following points should be observed: — reception desk opening times are: 7.00-17.00 (no tender can be submitted outside these hours), — the tender must be submitted by 15:30 at the latest on the day mentioned above and confirmed by a receipt issued by armasuisse; (b) if submitted by post: the definitive date is the postmark or the barcode sticker attached by a shipping provider (company franking marks do not count as official post office franking marks); (c) delivery to a Swiss diplomatic mission or consular post: the receipt confirmation issued by that office is definitive. The receipt confirmation must be sent to the e-mail address given under point 1.2 by the tender deadline at the latest. Remarks (desired deadline for questions in written form): If queries arise while preparing the tender, they must be submitted by means of an anonymous forum entry to the question forum at www.simap.ch A separate forum entry must be created for each question (one question per entry). The questions will be answered in the simap.ch question forum. All questions and answers can be viewed by all bidders who have received the tender documentation. It is the responsibility of bidders to keep themselves informed of any entries in the question forum. National reference publication: SIMAP of 2.10.2019, doc. 1098437 Desired deadline for questions in written form: 21.10.2019. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Temperature or humidity surface observing apparatus was 11 Nov 2019. Bidding is closed.
This tender has been issued by ARMASUISSE PURCHASING AND COOPERATIONS in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 38126300 - Temperature or humidity surface observing apparatus, 38126400 - Wind surface observing apparatus, 38930000 - Humidity and moisture measuring instruments.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 36839684. The purchaser document reference is 465347-2019.
This tender falls under Technology and Equipment in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.