Contract notice: Taps, cocks, valves and similar Tender - 32436560
Tender notice from Poland, published on 22 Apr 2019.
Executive Summary
The MIEJSKIE PRZEDSI?BIORSTWO WODOCI?GÓW I KANALIZACJI SPÓ?KA AKCYJNA has issued a Tender notice for the procurement of a Contract notice: Taps, cocks, valves and similar appliances in the Poland. This Tender notice was published on 22 Apr 2019 and is scheduled to close on 29 May 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 32436560, while the tender notice number is 188359-2019 and Register on the platform.
Key facts
Summary
Contract notice: Taps, cocks, valves and similar appliances
Object of the contract Taps, cocks, valves and similar appliances Description: Contract notice: Taps, cocks, valves and similar appliances Authority Type: Utilities entity Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42130000, 42130000 CPV Description: Taps, cocks, valves and similar appliances. Supply of water supply fittings - pipe couplings and universal flange pipe connectors in diameters from DN 50 to DN 600 mm Reference Number: 442 / PN-19/2019 The subject of the order is delivery of water supply fittings pipes and universal-pipe-and-tube connectors / for steel, cast iron, AC, PVC, PE / in the medium rangeNothing from DN 50 to DN 600 mm. Main Site: City of Krakow The subject of the order is delivery of water supply fittings for pipe couplings and universal-flange fittings / for steel, cast iron, AC, PVC, PE / in diameters from DN 50 to DN 600 mm. Universal pipe and flange fittings (for steel, cast iron, AC PVC and PE) The subject of the order must meet the following requirements:not made of ductile iron or constructional steel. The ordering party will accept elements of fasteners made of non-ferrous metals alloys Fasteners with anti-slip protection must be equipped with an additional segment ring with anchoring elements protecting the pipe against sliding, cooperating with an NBR rubber seal or EPDM providing a deviation angular axis of the pipe from the connectora, minimum 40 - in the range of diameters up to DN 400 mm (Angle of pipe deflection 80 / - 40 per cup). Anchoring elements of connectors should be made of stainless steel. For diameters above DN 400, protection against displacement is also required. The ordering will allow a different type of protection, angular deviation of the pipe axis from the connector, a minimum of 40 Fasteners externally and internally secured with antiquesrozśnienie epoxy paint applied by fluidization in accordance with DIN 30677, as well as quality and acceptance guidelines resulting from the recommendations of the Association for Anticorrosive Protection GSK-RAL (You must provide the appropriate certificate). The Employer will allow to use connectors with a Rilsan coating (Poliamid 11) with a minimum thickness of 250μm EPDM or NBR gaskets. (provide W270 Certificate) Sruand nuts made of stainless steel. In the case of pipe couplers mounted on both sides of the connector as independent elements (pins are not allowed) Mounting method prepared for screwing with one key Screws protected with a non-chemical dry anti-seize coating (provide confirmation from the manufacturer) Flange connectors must be be importantLooking at the gasket on the collar. The connectors must be supplied with an elastomer seal (EPDM or NBR) with a vulcanized steel ring not permanently attached to the flange Maximum working pressure PN16. up to DN 300, above DN 300 PN10) Product marking: cast iron class (material symbol), manufacturer's name, diameter and nominal pressure (permissible pressure robeye) marked in a prominent place of the casting. For DN 450 mm pipes, a flange outlet DN 400 mm must be offered. It is not required that the whole range is from a single manufacturer. The minimum clamping range for a given nominal diameter DN must be the specified range specified in column 4. Anchoring elements of connectors with anti-eject protection made ofstainless steel. The rest of the description in SIWZ 1. For ordering based on art. 22 par. 1 uPzp may apply to contractors who are not subject to exclusion based on the premises of art. 24 of the Act and meet the conditions for participation in the proceedings regarding: technical or professional capacity. 2. In order to demonstrate the absence of grounds for exclusion from the procurement procedure and satisfyThe terms and conditions of participation in the bidding procedure must be accompanied by a declaration, in the form of a Single Form of a European Order Document (hereinafter referred to as "EAT"), valid as at the day of submitting bids. The information contained in the EJF Form is a preliminary confirmation that the contractor is not subject to exclusion from the proceedings and meets the conditions for participation in the procedure. Contractor who refers to the resourcefor other entities, in order to demonstrate the absence of grounds for exclusion and fulfillment to them in so far as it relies on their conditions of participation in the proceedings, also submits an EAT regarding these entities 4. Contractor who intends to entrust the execution of a part of the contract to subcontractors in order to demonstrate the lack of existence of grounds for exclusion from participation in the procedureSUBSCRIBES EAT regarding subcontractors. 5. In order to confirm the lack of grounds for exclusion from the proceedings referred to in art. 24 sec. 1 point 23 of the Act, the contractor, pursuant to art. 24 sec. 11 of the Act (within 3 days from the date of placing information on the opening of tenders by the ordering party on the website, referred to in Article 86 (5) of the Act), makes a declaration on the affiliationb not belonging to the same capital group within the meaning of the Act of 16.2.2007 on competition and consumer protection (unified text - Journal of Laws of 2018, item 798 with later amendments) with other contractors who submitted separate offers, according to the template constituting Annex 4 to the Terms of Reference and, in the case of belonging to the same capital group, evidence confirming that connections with anothercontractors do not lead to distortion of competition in the proceedings. 6. In order to demonstrate the absence of grounds for exclusion from the proceedings, the contractor whose tender was evaluated as the most advantageous, on the ordering party's request (as on the day of their submission), the following statements and documents: 1) Information from the National Criminal Register in the scope specified in art. 24 sec. 1 items 13, 14 and 21 of the Acty, issued not earlier than 6 months before the deadline for submitting bids; 2) Certificate of the competent head of tax office confirming that the contractor is not in default of paying taxes, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the contractor has concluded an agreement with the competent tax authority regarding the repayment of thesereceivables along with any interest or fines, in particular obtained legally permissible, postponement or payment of overdue installments or suspension in full of the decision of the competent authority; 3) Certificate of the relevant organizational unit of the Social Insurance Institution or Agricultural Social Insurance Fund or other document confirmthat the contractor is not in arrears with paying social security or health insurance contributions, issued not earlier than 3 months before the deadline for submission of tenders, or other document confirming that the contractor has concluded an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular, obtained the legally required exemption, postponementor payment of overdue payments to installments or suspension in full of the decision of the competent authority; 4) A copy from the relevant register or central records and business information, if separate regulations require entry in the register or records, to confirm the absence of grounds for exclusion based on art. 24 sec. 5 point 1 of the Act. Detailed description of conditions and Annexw is in SIWZ. 1. The tender procedure is conducted using means of electronic communication. Communication between the ordering party and contractors is carried out using the Procurement Platform of MPWiK SA in Krak-w for Public Procurement on the basis of the PPL (hereinafter: "platform" or "bidding platform") https://mpwik-pzp.logintrade.net/rejestracja/ustawowe. html (on the website of MPWiK SA- tab Tenders / Statutory tenders). 2. In the present proceedings, the reverse procedure specified in art. 24aa of the PPL Act. The contracting party first evaluates the offers and then examines whether the contractor whose offer has been evaluated as the most advantageous is not subject to exclusion and meets the conditions for participation in the procedure. The ordering party calls the contractor before the order is given, whose offer has been rated the highest, to submit valid statements or documents confirming the circumstances referred to in Art. 25 para. 1 of the Public Procurement Law, it is not subject to exclusion, fulfillment of the conditions for participation in the proceedings and fulfillment of the requirements specified by the ordering party by the offered deliveries. 3. The date of binding given in point IV.2.6 of the announcementoffer is 60 days from the deadline for submitting offers, inclusive 4. Due to the limited number of signs in the announcement, further information provided in sections II.2.4), III.1.1), III.1.4) and III.1.8) is included in the ToR. Internet address (URL): www.mpwik.krakow.pl
The bid deadline for Contract notice: Taps, cocks, valves and similar appliances was 29 May 2019. Bidding is closed.
This tender has been issued by MIEJSKIE PRZEDSI?BIORSTWO WODOCI?GÓW I KANALIZACJI SPÓ?KA AKCYJNA in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42130000 - Taps, cocks, valves and similar appliances.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 32436560. The purchaser document reference is 188359-2019.