Contract notice: System and support services Tender - 32944661
Tender notice from Poland, published on 14 May 2019.
Executive Summary
The PRZEDSI?BIORSTWO PA?STWOWE „PORTY LOTNICZE” has issued a Tender notice for the procurement of a Contract notice: System and support services in the Poland. This Tender notice was published on 14 May 2019 and is scheduled to close on 17 Jun 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 32944661, while the tender notice number is 223570-2019 and Register on the platform.
Object of the contract System and support services Description: Contract notice: System and support services Authority Type: Utilities entity Contact Nature: Services Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 72250000, 72230000, 72267000, 72250000, 72230000, 72267000 CPV Description: System and support services. Service and maintenance UTB (elevators, escalators and moving walkways) installed at the Airport. F. Chopina w Warszawie Reference Number: 22 / PN / ZP / TLLZP / 19 Conclusion of a contract for service and maintenance of Middle Transport Equipment (elevators, escalators and moving walkways) installed in facilitiesP.P. "Porty Lotnicze" in the quantity of 113 items. Main Site: Przedsiębiorstwo Państwowe "Porty Lotnicze", ul. Żwirki i Wigury 1, 00-906 Warszawa, POLAND The subject matter of the order is the provision of maintenance services including: 1. Conclusion of the Contract for servicing and maintenance of Middle Transport Equipment (elevators, escalators and moving walkways) installed in P.P. "Airports" in the amount of 112 items for the period3 years. Scope of the Contract 2. Providing comprehensive technical service and permanent maintenance of UTB devices shown in Annex 1 in accordance with applicable law, UDT requirements and manufacturer recommendations 3. Performing emergency repairs, removing defects and carrying out modernization works to maintain UTB's operational efficiency on the basis of applications fromaccording to the price list, which the Contractor will attach to the offer (Price List of Materials and Services). 4. Performing emergency repairs, removing defects and carrying out modernization works to maintain UTB's operational efficiency on the basis of applications from the Ordering Party not included in the Price List of Materials and Services. 5. Delivery of spare parts and all materials necessary to perform the actThe parts included in points 3 and 4. All spare parts for which a resuret is required must be provided with documentation of the necessary limit parameters used to assess and identify their technical condition. Providing a 24/7 crane emergency service. 7. Providing an 8 h assistance to the conservator on workdays. 8. Timely performance of necessary measurements and examinationsaganized by UDT. Providing the Employer with the reports from the measurements carried out. - The Contractor's Responsibilities 9. Within the scope of tasks specified in item 2, the Contractor's obligations shall include: a. Performing technical inspections (maintenance) in accordance with applicable UDT regulations and manufacturer's recommendations b. Compliance with the inspection dates made by the Office of Technical Inspection and representedand the Employer in inspection activities carried out by UDT under this agreement c. Providing an 8-hour assurance of the conservator on working days d. Delivery and replacement of damaged call buttons / instructions e. Removal of contaminations from engine room, podszybia, scaffolding f. Post-emergency review g. Performing special inspections concluded with the determination of the device's resure. 10. Within the scope of tasks specified in item 3, the Contractor's obligations shall include: a. Perform repairs ordered by the Ordering Party on the basis of list prices, which will include the value of materials / spare parts and the cost of the service, specifying the prices of materials and services. B. Requests for additional works will be sent by e-mail to the Contractor's address by an authorized employee of the Employer. C.The work will be carried out by the Contractor after acceptance of the offer by an authorized employee of the Employer. 11. Within the scope of tasks specified in item 4, the Contractor's obligations shall include: a. Performing repairs ordered by the Ordering Party on the basis of the offer submitted by the Contractor containing the cost estimate with the specification of prices of materials and services. B. Work orders for additional workwe will be sent by e-mail to the Contractor's address by an authorized employee of the Employer. c. The work will be carried out by the Contractor after acceptance of the offer by an authorized Employer. D. the contractor will specify in the offer the man-hour rate. The contractor must have a certificate confirming that it meets certain requirements for the maintenance and repair of the equipmentcrane and hoisting cranes, eg a certificate issued by the Office of Technical Inspection or equivalent. The offer and the EAT Form may be submitted only in electronic form signed with a qualified electronic signature via the Platform Portal SmartPzp. Contractors should submit their offer by 17.6.2019 at 10: 00 2. The ordering party (in accordance with Article 26 paragraph 1 of the Act) will call the Contractor, whom hethe offer was rated the highest to submit the following documents within the prescribed period, confirming no grounds for exclusion in the scope of art. 24 sec. 1 of the Act indicated in the Ordinance of the Minister of Development of 26 July 2016 in the "on types of documents (...)": - - paragraph 5, item 1) - in the scope of paragraph 24, item 13, 14, 21 of the Act, - par 5 point 4) - within the scope of Article 24 paragraph 5 point 1 of the Act, - par. 5 points 2), 3) and 9) - within the scope of art. 24 sec. 5 point 8 of the Act, - par. 5 point 5) - within the scope of art. 24 sec. 1 point 15 of the Act, - par. 5 point 6) - within the scope of art. 24 paragraph 1 point 22 of the Act 3. If the Contractor has his registered office or place of residence outside the territory of the Republic of Poland, and also if the person whose document relates is residing outside the territory of the Republic of Poland, the rules set out in par. 7 and 8 above Regulation. 4. The ordering party, in order to confirm the fulfillment of the conditions for participation in the proceedings, acting on the basis of art. 26 par. 1 of the Act will call the Contractor, whose offer was the highest rated to submit within the prescribed period - List of services performed together with evidence confirming proper performance and a certificate issued byUDT. 5. The Contractor applying for the award of this order must submit the following documents along with the offer: - - Form 'Offer' (Annex 1 to the Terms of Reference), - Price forms, - Commitment where the Contractor relies on the capacities of other entities in accordance with a record in the SIWZ, - Uniform European Order Document, - proof of payment of a bid bond, - power of attorney from whichego results in the right to sign the offer (in accordance with the ToR), - authorization to represent all Contractors (in accordance with the Terms of Reference). 6. According to art. 24 sec. 11 of the Contractor's Act within 3 days from the date of posting on the website the information referred to in art. 86 par. 5 of the Act will provide the Employer with a declaration on belonging to or lack of belonging to the same capital group, referred to in art. 24 sec. 1 point 23 of the Act. With the submission of a statement, the Contractor may provide evidence that links with another Contractor do not lead to distortion of competition in the procurement procedure. The Contracting Authority informs that for a period of two months, referred to in Section IV point 2.6 of this announcement should be understood as a period of 60 days counted from the date of the offer openingt. 8. The Contracting Authority provides for the contracting of services to the previous Contractor in accordance with art. 134 sec. 6 point 3 of the Public Procurement Law. The scope of these services will include services referred to in - 1 para. 2 points 7), 8), 11), 14) and 15) Significant Provisions of the Agreement and the value of these services will not exceed 50% of the value of the basic service in this respect. 9. Due to the limited number of characters that you can enteradmit to the content of the announcement, other information is included in the ToR available on the Ordering Party's website Internet address (URL): www.polish-airports.com
The bid deadline for Contract notice: System and support services was 17 Jun 2019. Bidding is closed.
This tender has been issued by PRZEDSI?BIORSTWO PA?STWOWE „PORTY LOTNICZE” in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 72250000 - System and support services, 72230000 - Custom software development services, 72267000 - Software maintenance and repair services.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 32944661. The purchaser document reference is 223570-2019.
This tender falls under Computer Hardware and Software Services, Defence and Security in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.