Expired Tender Switzerland ICB TOT Ref. 29305514

Contract notice: Surface work for highways Tender - 29305514

Tender notice from Switzerland, published on 18 Dec 2018.

Executive Summary

The OFFICE FÉDÉRAL DES ROUTES — INFRASTRUCTURE ROUTIÈRE OUEST FILIALE ESTAVAYER-LE-LAC has issued a Tender notice for the procurement of a Contract notice: Surface work for highways in the Switzerland. This Tender notice was published on 18 Dec 2018 and is scheduled to close on 22 Feb 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 29305514, while the tender notice number is 557311-2018 and Register on the platform.

Key facts

Summary
Contract notice: Surface work for highways
TOT Ref. No.
29305514
Document Ref. No.
557311-2018
Country
Switzerland
Notice type
Tender
Competition
ICB
Publication date
18 Dec 2018
Bid deadline
22 Feb 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Surface work for highways
Description: Contract notice: Surface work for highways
Authority Type: Ministry or any other national or federal authority
Contact Nature: Works
Procedure: Open procedure
Document: Contract notice
Regulation: GPA
Award criteria: The most economic tender
CPV code: 45233210, 45233210
CPV Description: Surface work for highways.
N12.76 180008 - Rev. Chatel-Saint-Denis - Riaz - Refurbishment of bituminous mixes Chatel-Saint-Denis - Riaz - Works 2019 (ID 5755)
Renovation work on the bituminous coating of certain sections of the Jura and Alps roads including 2 lanes:
Main Site : On-site works and F1 subsidiary of OFROU in Estavayer-le-Lac (sessions).
Renewal workthe bituminous coating of certain sections of roadways Jura and Alps including 2 lanes of traffic:
- device of separation of the traffic:
- night work: closure to the traffic in the zone of works, setting in bidirectional in the opposite direction during the night. Restoration of the traffic in each direction the day. This applies throughout the work phase for each step csubject to this type of work,
- milling general: 218 000 m, depth 40 mm,
- SAMI membrane (thickness 10 mm): 218 000 m,
- wearing course, thickness 30 mm: 18 200 t,
- marking of the roadways: length of the section of 25.4 km.
Work to be done at night according to the stages.
The following attestations / confirmations must be filed at the same time as the offer file unlessthis is specified otherwise; if not, the offer will not be examined. Bidders are urged to use the tender specifications provided with the bidding documents to order the evidence.
Q1 Technical Capability
Q1.1: A business reference object (or group of products). companies) on a project of comparable complexity, already realized, in the same specialized area.n indicating:
1) the period;
2) the volume invested;
3) the executed work or the services provided by the company;
4) authorized interlocutor of the reference body (former principal).
The reference of the project will be reported in form Q1.1 of the tender specifications.
Q2 Economic and financial capacity
Q2.1: attestation of the applicant's annual turnover (firm or group of enterprisesises) double the annual turnover of the market (form Q2.1 of the tender specifications).
Q2.2: documents to be submitted with the bid of the tenderer:
- voluntary declaration by the tenderer (signed) (form Q2.2.a of the tender specifications),
- excerpt (s) from the commercial register or, for companies having their registered office abroad, similar certificate (s) (less than three months old by repoat the time of submission of the tender). (Form Q2.2.b of the tender specifications)
Q2.3: Certifications to be submitted after the submission of the tender by the tenderer at the request of the principal within 7 days (form Q2.3):
- extracts from the register of prosecutions (more recent than three months in relation to the time limit for the submission of the offer),
- extract from the bankruptcy office,
- justifications for paymentscurrent for AVS / AI / APG / AC as well as SUVA and AFC,
- justifications of current payments for LPP,
- professional liability insurance certificate (s) for damage and amounts of cover as specified in the project of contract.
Q3 Competences and key-persons reference
Q3.1: references of the key persons (1 conductor of works), relating to 1 project of complexitycomparable, already performed, in the context of an equivalent function or function in the same specialized field by indicating:
1) the period;
2) the volume invested;
3) the work performed or the services provided key persons;
4) interlocutor authorized from the reference body (former principal).
References of key persons will be reported in form Q3.1 d.u offer book. The CV and the certifications of the driver of the work will be annexed to the offer.
Q3.2: availability of the key persons (1 driver of the works): proof that, during the duration of the works, the availability of the driver of the works is guaranteed.
Enumeration and detailed description of the time constraints imposed by their other projects reported in form Q3.2 of the bookletoffer Q3.3: proof that a maximum of 50% of the service can be provided by subcontractors, according to form Q3.3.
The qualification criteria must not be met by each of the partner companies, but by the Working Community (CT), unless a requirement is explicitly referred to individual companies.
Partial offers are not allowed.for countries which have not acceded to the WTO Agreements: none.
General Conditions: according to the proposed contract.
Negotiations: are reserved.
Conditions governing the procedure: the Contracting Authority awards public contracts for in Switzerland only to contractors who guarantee compliance with the provisions on the protection of workers, s of work and equal pay for men and women.
Other information:
1) tendering criteria.
Tenderers are requested to use the tender documents delivered with the tender documents for the tender. order the evidence. The construction services will be realized with hindrance to the traffic with low complexity.
C1 Price [60%]
Evidence for this criterion: - seriesprice (piece P5).
Elements of judgment: the price considered for the evaluation is the amount of the offer with discount, without discount and without VAT, after control by the representative of the OM and correction of arithmetical errors. The price evaluation is carried out according to the following method: the maximum score (5) is attributed to the lowest price bid. Offers, the price is greater than 30% or more than the lowest offer, score 0. In between, the evaluation is linear and takes into account the hundredths.
C2 Quality of the documents produced [20%]
Description in form C4, the The tenderer will include a non-exhaustive list of technical risks, security risks and the risks of delays related to the market. The tenderer will presentalso the procedures of implementation and management of the quality which it envisaged (procedures of autocontrole, procedures of control of the supplies, procedures of the laboratory of the company, ...).
Evidence for this criterion:
- technical report - risk analysis - flowchart with decisional flows and information flows - health and safety plan - quality assurance plan,
- elements of ju- quality of the documents produced,
- relevance of risk analysis and planned measures to reduce them to an acceptable level,
- enforcement procedures, decision flows and information flows - security measures during execution.
C3 Work program [10%]
Duration of work until the acceptance of the control work and the opening to traffic. Moreover, he agreesmake it clear in the planning the duration of each phase in terms of actual nights (nights of work and holidays, including night postponed due to bad weather conditions). This criterion is analyzed on the basis of the work program (tender document, form C2). The detailed schedule must show how the tenderer plans the main activitiesites. The format of the detailed intervention schedule at night is at the bidder's choice but must imperatively describe the following main activities:
- general milling, sweeping, washing, drying,
- laying geogrid and the SAMI membrane,
- laying of the layer of rolling, pre-marking and marking.
Proofs for this criterion:
- program of works,
- technical report.
Elements of judgment:
- duration of works,
- respect of the intermediate and final deadlines,
phasing by type of work or object.
C4 Quality, plausibility of the work program in relation to the progress of the work [10%]
The tenderer will also submit (form C3) the manner in which it ensures the quality of the construction program and will describe the plausibility criteria.
Evidence for this criterion:
- reporttechnical,
- site installation plan.
Elements of judgment:
- plausibility: concordance between the program of work and resources and means,
- description and optimization of site facilities,
- working method and coordination of Teams.
Evaluation of the criteria for award other than the price criterion: the evaluation is ...
Internet address (URL): https://www.simap.ch

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Installation of two elevator systems for wastewater treatment facility ** Switzerland 152593378 29 Jan 2027
Bkp 281.1 Seamless Floor Coverings & Bkp 282.0 Seamless Wall Coverings Switzerland 152593376 22 Jan 2027
Tender Bkp 248.2 Cold Rooms Switzerland 152593374 24 Dec 2026
Usz Campus Mitte 1|2 / Bkp 273.18 Doors Package 8, Inspection Doors (Ov) Switzerland 152593372 28 Jan 2027
Croix D'or 12 - Lot Cvc Switzerland 152593369 11 Dec 2026

Switzerland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Surface work for highways was 22 Feb 2019. Bidding is closed.

This tender has been issued by OFFICE FÉDÉRAL DES ROUTES — INFRASTRUCTURE ROUTIÈRE OUEST FILIALE ESTAVAYER-LE-LAC in Switzerland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 45233210 - Surface work for highways.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 29305514. The purchaser document reference is 557311-2018.

See the Similar Tenders section on this page or browse other tenders from Switzerland.

This tender falls under Construction and Real Estate in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.