Contract notice: Structure estimation apparatus Tender - 42085294

Object of the contract
Structure estimation apparatus
Description: Contract notice: Structure estimation apparatus
Authority Type: Body governed by public law
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 38425400, 30213000, 38425400, 50530000, 79998000, 38425400, 30213000, 50530000, 79998000
CPV Description: Structure estimation apparatus.
Personal computers.
Repair and maintenance services of machinery.
Coaching services.
Tribological material testing system II.
Reference Number: EKR000137962020
Transmission contract research and accuracy up to 4 months from the date of the contract test, betanitas min. 3 people from 1 month of beluel)
Main Site: 3519 Miskolc, Igloi u. 2. (location of the tenderer)
Total quantity: 1 research standard and precision tribological material testing system (System)
Required:
The system must be able to:
examination of material characteristics, material internal fabric structures and fossil forest characteristics: geometry esin addition to the movement conditions, to study the above-mentioned rolling conditions and surface degradation, i.e. to be suitable for pin-on-disc, pin-on-plate, ball-on-disc, ball-on-plate, cylinder-on-disc, cylinder-on -plate, block-on-ring, four ball body type tests for kueloenboezing temperature,
- further lubricating film thickness / viscosity test:
suitable for contact falso for the examination of lubricating lubricants of an optionally surprising lubricant coesoetto
Main parameters, requirements:
- In addition to the most basic, standard test body geometries and movement conditions, it must be able to test the above-mentioned sliding conditions and surface degradation, ie pin-on-plate, ball-on-disc, ball-on-plate, cylinder-on-disc, cylinder-on-plate, block-on-ring, four-ball body type examinations at kueloenboezing temperatures,
- Tribological contact spot can create a straight line, a relative direction of change,
- A line of a straight line, a variable direction, and a direction of contact In the case of some of the examinations detailed in Technical Description, it can be
measured, explained in contactfeed load: adjustable in a range of at least 5 N 2000 N,
range of contact spot displacement adjustable in amplitude at least 0.1 5 mm coezoetti,
test frequency variable in a range of at least 2 15 Hz,
prints with continuous rotation at 1, 500 rpm at least 4 Nm,
speed can be varied in a range of at least 20 3000 rpm with continuous rotationato,
can be varied in a load range of at least 5 2000 N with a load-bearing continuous rotational movement applied to the contact,
the maximum radius of contact of the contact spot can be set to at least 35 mm,
- Test temperature control control rate (minimum 30 85%),
- Lubricant infiltration
- Position resolution with rotational motion less than or equal to 0, 1 in tangential direction and less than or equal to 10 μm in X, Y, Z direction, - - Baldness resolution less than or equal to 2 μm,
- Noise level of load-bearing beams on contact must be less than or equal to 0.05%,
- Noise load on contact loadsntasa less than or equal to 0, 05%,
- Contact resistance perpendicular to a range of at least 1 300 Ohm,
- Temperature resolution of at least 0.1 C.
Tasks to be performed, uetemezes:
- performance: from max. 4 ho,
- final performance: betanitas beluel within 1 month from the start
Betanitas: min. 2 working days (8 teachers / working day; 45 minutes / teacher) training, legalabb for 3 people
- jotallasi: from beuezemelest 18 ho.
Available pool: jotallasi time min. 72 oran beluel.
The required properties of the Transportable System are included in the Technical Description, and some of its properties (toebblettudasa) can be recommended more favorably according to point II.2.5): score keru
Precise parameters, details of the expected performance in the Technical Description, resp. in the draft contract
List of grounds for exclusion:
1. the tenderer may not be a tenderer (AT), a subcontractor (AV), and an economic operator against whom the Public Procurement Act applies may not take part in the certificate of suitability. One of the exclusionary conditions set out in Section 62 (1); it cannot be in the proceedingst AT, AV, and may not take part in the certificate of suitability of an economic operator against whom the Kbt. There is a reason for exclusion pursuant to Section 62 (2).
List of certification methods, description of the certificate:
in the co-procurement procedure carried out in accordance with the second part of (X. 30.) Kormanyrendelet (Kr.) II. In accordance with Section 7 of Chapter 2, you must certify in advance by submitting the Single European Co-Procurement Document (EECD) that you do not belong to the Public Procurement Act. Section 62 (1) and (2)
The offer shall be accompanied by a declaration from AT stating that it will not take into account the exclusionary grounds under Section 62 (1) (2) for the performance of the contractor. AV t. The statementThe application must be submitted even if the AK did not prescribe the name of the already known AVs in the procedure. Pursuant to Section 69 (4) (7), the economic operator called upon to submit certificates concerning the grounds for exclusion shall be required to comply with Article III. in accordance with Sections 8 and 10 of Chapter II, he must prove that he is not subject to the grounds for exclusion prescribed in the proceedings, and must also declare whether he hasThe process of registration of a variation is pending before the company, and if so, the variation application submitted to the company and the certificate of its receipt issued by the company must be attached. The certificates listed in Sections 8, 10, 12 16 of Chapter Kbt. In accordance with Section 69 (11), koezvetlenuelozzafernot mentioned in c., the economic reasons for the exclusion or the suitability of the economic operator for databases, and the economic operator indicated their availability in the EEKD. The methods of attestation referred to in Sections 8, 10, 12 16 of Chapter II may be assigned in accordance with Chapter V if the economic operator concerned proves, by means of a qualified tenderer, that he complies with the
For the reasons of exclusion, certificates issued prior to the commencement of this procurement may also be submitted (used) as long as the content of the facts and data contained in the certificates is true. Until the contrary is proved by AK, the authenticity of the data shall be covered by the applicant `s declaration to that effect. AF II.1.5) and IValues in I.2.6): technical values only. In point IV.2.6 of AF 2 months = 60 days, taking into account the Kbt. - 81 (11). AK will not try to make an offer to tender insurers. Consultation, there will be no on-site visit. Co-procurement is not required
2. K does not allow bidding for parts, because the System to be procured must technically form a single unit. THEbreaking down into parts could result in the purchase of non - fitting parts. Opt. landscape. can be found in Kbt. Pursuant to Section 56 (1), to which the Kbt. Pursuant to Section 56 (2) (5). Communication takes place in the EQF (Section 40 (1) of the Public Procurement Act). Obligation to pay: AD in Kbt. Section 73 (4) availability of organizations. K corresponds to Kbt. Checks in accordance with Section 73 (5).
5. AT, koezoes AT for each, Kbt. 65th- (7) and submitted by any other organization making a company-like declaration in the offer:
- a certified declaration of cegalairas power of attorney as specified in the documentation
6. If an ongoing change registration with ATis to be attached, to be attached: a variation registration application submitted to the company and a certificate of its receipt from the company
7. Declarations, certificates: The offer must primarily, but not exclusively, contain the Kbt. Section 66 (2), (5) and, where applicable, the Public Procurement Act. - 65 (7) (8), (12), as well as in Art. - 68 (4) and, where applicable, Kbt. In Section 35 (2a), fogltakat.
8th If a sample statement is available in the EQF in electronic form in the language of the declaration, the declaration must be made after completion of the electronic form (Section 41 / A (3) of the Public Procurement Act), to which Kbt. 41 / A. - (4).Representations on behalf of the co-procuring ATs are made by the GS submitting the tender (Section 41 / A (5) of the Act). provided that the information contained therein is accurate and that it contains the information required for the purpose of certification.the Kbt. He is also entitled under Section 69 (11a).
9. K does not prescribe, so the tender does not have to indicate to the co-procurer the part (s) for which the subcontractor T is to be accepted, and it is not necessary to indicate the subcontractors who have been taken into account for these parts and are already known at the time of submission of the tender. AK draws attentionet a Kbt. Section 138 (1) (2), (4) (5).
10. The offer shall specify, for each test requirement, whether the proposed System complies with the test requirement, and in the case of test requirements where AK has established a number of test requirements, what is the property of the proposed System (specific to its elements). The concrete must be supportedtype designation and place of origin, as well as a description (product description) of the proposed System as required. The language of the procedure is Hungarian (IV.2.4)), but the documents of the recommended System are also accepted in English. K does not order another shortfall Kbt. To the newly named GSZ pursuant to Section 71 (6).
12. AT is less than the contract testprovide the required service and application details. K interprets these conditions as non-compliance with the contractual test, and Kbt. Pursuant to Section 131 (4), jar el.
13. In the event of a return of the winner, in the event of the announcement of the AK, the second AT may be contracted. (Section 131 (4) of the Public Procurement Act).
14. FAX: Adamne Egri Judit (registration: 00239)
15. AK does not apply the Kbt. Section 75 (2) e) -t Continued VI.4.3)
Internet address (URL): http://www.bayzoltan.hu