Object of the contractSpectrum analyser
Description: Contract notice: Spectrum analyser
Authority Type: Ministry or any other national or federal authority
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: GPA
Award criteria: The most economic tender
CPV code: 38433300, 32000000, 38433300, 32000000
CPV Description: Spectrum analyser.
Radio, television, communication, telecommunication and related equipment.
Handheld Spectrum Analyzer
As part of international obligations, the Radio Monitoring section (RM) of the Radio Monitoring and Equipment department (RA) of the Federal Office of Communications (BAKOM) is responsible for maintaining quality in the frequency spectrum at all times. So as to meet these demanding requirements, the measurement infrastructure in place at RM must be constantly upgraded and kept at the state of the art in order to preserve value and as part of official requirements.
Main Site : Biel/Bienne.
As part of international obligations, the Radio Monitoring section (RM) of the Radio Monitoring and Equipment department (RA) of the Federal Office of Communications (BAKOM) is responsible for maintaining quality in the frequency spectrum at all times. So as to meet these demanding requirements, the measurement infrastructure in place at RM must be constantly upgraded and kept at the state of the art in order to preserve value and as part of official requirements.
In order to be able to fully cover current needs for detecting attempts at disruption, our measurement infrastructure (measurement devices) need to be enhanced. The handheld spectrum analyzers to be procured will be used to search for and locate sources of attempted disruption.
When the tender is submitted, the suitability criteria and required supporting evidence listed below must be confirmed, appended, and substantiated in full without any reservations or modifications; otherwise the bid will not be considered.
E1 Extracts from the debt collection register and excerpts from the commercial register: Extracts from the debt collection register and excerpts from the commercial register or the equivalent recognised documentation from other countries which provide evidence that the tenderer does not have any tax debts or has not paid the full amount for social security contributions (not older than 3 months the effective entry date is decisive).
E2
(a) Compliance with procedural principles: the tenderer confirms that it and the third parties it has called on (subcontractors and subsuppliers) will comply with the procedural principles in accordance with the self-declaration sheet (Enclosure 1.1.1) of the Swiss federal government`s purchasing conference (BKB).
(b) Additional evidence of compliance with the regulations on equal pay for men and women: tenderers with more than 50 employees and their first-level subcontractors that have more than 50 employees must also provide evidence for the self-declaration sheet on how their salary practice has been reviewed and how the tolerance threshold of 5 % applied in purchasing functions is adhered to.
E3 Supplier self-declaration completed and legally signed supplier self-declaration (Enclosure 1.1)
E4 Overall responsibility: the tenderer confirms that it will assume overall responsibility, i.e. the tenderer is the sole contractual partner of the contracting authority. Any parties involved must be listed together with their assigned roles and functions in Enclosure 1.1.
E5 Project language: the tenderer confirms that it is capable of handling the project in German or English (spoken and written) throughout the term of the appointment.
E6 Draft contract: the tenderer confirms unconditional acceptance of the draft contract in accordance with enclosure 4.0.
E7 Quality management system: the tenderer has an existing quality management system that meets ISO 9001, or a certification or manual of at least equivalent standing.
E8 References: the tenderer has sufficient experience in projects comparable to this order in terms of scope and complexity. The tenderer must give two references to whom comparable services have been provided since 2017.
E9 Invoicing: the tenderer confirms that all invoices will be submitted by e-billing. Information on the various options can be found in Enclosure 1.6 and from the following contacts:
www.e-rechnung.admin.ch,
[email protected]E10 System documentation: the tenderer confirms that it will provide the system documentation to the customer.
E11 Factory calibration: the tenderer (sole tenderer, general contractor including any sub-contractors or tender consortium) confirms that factory calibration/final calibration will be carried out on the device in accordance with the manufacturer`s test specifications before final acceptance.
E12 GTCs of the federal government: Confirmation of the tenderer accepting the federal government`s general terms and conditions of business for procuring and maintaining hardware, accessible at http://www.ar.admin.ch
E13 Term of delivery: The tenderer confirms that it can meet a delivery deadline of four (4) weeks from receipt of order.
Partial offers are not permitted.
Conditions for countries not party to the WTO agreement: none.
Negotiations: none. The bidder is instructed to submit its best offer.
Basic procedural principles: the client only awards public commissions for services in Switzerland to tenderers who comply with job security regulations and the conditions of work for employees, and provide equal payment for men and women.
Procedures for appeal:Pursuant to Art. 30 of the Federal Act on Public Procurement, an appeal against this publication may be filed within 20 days since notification in writing in an official language of Switzerland to the Federal Administrative Court, Postfach, 9023 St Gallen. The appeal petition must be submitted in duplicate and must contain the application, the grounds of appeal with details of the evidence and the signature of the appellant or his agent; a copy of the present publication and documents cited as evidence must be attached, provided they are in the appellant`s possession.
Deadline/remarks: place of submission: cf. 1.2. The following must be observed in order to meet the submission deadline:
(a) For submission to armasuisse (administration centre Guisanplatz 1) The following points must be observed when handing in the goods at `Verwaltungszentrum Guisanplatz 1`, Guisanplatz 1, 3003 Bern, at the attention of CC WTO armasuisse:
• The provider must register at `Areal Lodge Guisanplatz 1` stating the project title (cf. section 1.2). It will be forwarded by the latter to the `Ramp Management Guisanplatz 1`.
• The submission must be made by 15.00 hours at the latest on the submission date mentioned under item 8.3 against issuance of a receipt confirmation of the ramp management.
• Opening hours of the ramp management: Mo-Fr 7.00-12.00/13.00-15.00 (outside these hours no offer can be made).
(b) For submission by post: the postmark or barcode receipt of the shipping service provider shall be authoritative (company frankings shall not be deemed postmarks). c) For delivery to a diplomatic or consular representation of Switzerland: the acknowledgement of receipt from the relevant representative shall be decisive. The acknowledgement of receipt must be sent to the e-mail address specified in section 1.2 by the latest by the deadline for submission of the offer, stating the project in question.
Remarks (Desired deadline for questions in written form) If queries arise while preparing the tender, they must be submitted by means of an anonymous forum entry to the question forum at www.simap.ch. A separate forum entry must be created for each question (one question per entry). The questions will be answered in the simap.ch question forum. All questions and answers can be viewed by all bidders who have received the tender documentation. It is the responsibility of bidders to keep themselves informed of any entries in the question forum.
National reference publication: Simap of 13 May 2020, doc. 1134909 Desired deadline for questions in written form: 3 June 2020.
Internet address (URL): https://www.simap.ch