Tender notice from Switzerland, published on 30 Jan 2020.
Executive Summary
The ARMASUISSE ACHATS ET COOPERATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Special-purpose electrical goods in the Switzerland. This Tender notice was published on 30 Jan 2020 and is scheduled to close on 09 Mar 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 40141928, while the tender notice number is 046935-2020 and Register on the platform.
Object of the contract Special-purpose electrical goods Description: Contract notice: Special-purpose electrical goods Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: Agreement between the European Union and the Swiss Confederation Award criteria: The most economic tender CPV code: 42992000, 42992000, 42000000, 42990000, 42992000, 42000000, 42990000 CPV Description: Special-purpose electrical goods. Industrial machinery. Miscellaneous special-purpose machinery. Air conditioning service equipment and exhaust gas measurement equipment The air conditioning service equipment below must be Purchased: Replacement / timely acquisition of air conditioning maintenance equipmentea provide a safe, economical and homogeneous solution for the whole of Switzerland. The proofs and supporting documents of suitability listed below must be provided in full with the offer, without restrictions or modifications, without which it will not be considered. on the offer. CAP1, extract from the prosecution register and the commercial register or equivalent official act issued by an authority andrangere which certifies that the tenderer has no tax debts or linked to unpaid social security contributions (no older than three months, the date of submission of the offer being decisive). CAP2, declaration of the tenderer. CAP3, certificate of the tenderer according to which he assumes overall responsibility for the present project, that is to say in particular that the tendereris the sole contractual partner of the adjudicating body. Any persons involved must be indicated in Annex 1.1 with the roles and functions assigned to them. CAP4, attestation of a single contact address (single point of contact SPOC) for all business processes. CAP5: a) compliance with the principles governing the procedure The tenderer certifies that heme and the third parties he solicits (subcontractors and suppliers) comply with the conditions governing the procedure in accordance with the document (appendix 1.1.1) of the Confederation of Purchasing Conference (CA); b) additional proof of compliance equal pay for women and men. Bidders and their first-rate subcontractors, each with more than 50 employeestutors must demonstrate, beyond the Bidder`s Declaration document, how they examined their salary practice. CAP6 (applies only to lot 1). The tenderer certifies that he has to date `` sufficient experience in the delivery of air conditioning system maintenance appliances, in accordance with the technical specifications and instructions contained ins the specifications. The tenderer must indicate at least 5 references per lot for which he has provided comparable services in the last 5 years (since 2015). CAP6 (only applies to lot 2). The tenderer certifies that he maintains a state checklist for all systems supplied and sends it to the client in the form of a report once a year. CAP7, the tenderer certifies that in the event of a breakdown in an installation maintenance appliance of a duration greater than 48 hours, he will provide a replacement appliance free of charge to the requesting service until the end of the repair. CAP8, the tenderer certifies that he grants a guarantee of at least 24 months on the maintenance equipment of the air conditioning installations subject toand its offer. CAP9, the tenderer certifies that he has a maintenance center with staff specialized in sales and services, as well as the possibility of giving free advice on questions related to products and to users in Switzerland and, if necessary, on site. Availability by telephone must be guaranteed on working days from Monday to Friday, from 8:00 to 12:00 and from 13:30 to 17:00, at the usual local rates. The tenderer guarantees a maximum reaction time of 48 hours from the receipt of a request (subject to force majeure and external influences). CAP10, the tenderer certifies: a) that the range of products that it offers will still be available for at least 5 years (at least until 2025); b) that il is able to ensure repair and maintenance, all spare parts included, for 10 years (at least until 2030). CAP11, the tenderer certifies that the systems proposed comply without reservation. CAP12, the tenderer certifies that he will provide a declaration of conformity for the air conditioning system maintenance appliances when they are delivered. CAP13, the tenderer certifies that he accepts the public contract (annex 4.0). CAP14 (only applies to lot 2). The tenderer certifies that he accepts the public contract (annex 4.1) . CAP14 / CAP15. The tenderer certifies that he accepts the general conditions of the Confederation: • CG relating to the purchase of goods (edition: Sept. 2016, state: Sept. 2016). Partial offersare admitted. Conditions for countries that have not acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: The contracting authority awards public contracts for services in Switzerland only for contractors who guarantee compliance with the provisions on worker protection, working conditions and equality of workbetween men and women. Other indications: according to the documents. Closing deadline for the deposit of offers / remarks: place of deposit: see figure 1.2) important for the respect of the delay of deposit: a) in case of hand delivery to Armasuisse (Guisanplatz 1 Administrative Center): when handing over to the "Verwaltungszentrum Guisanplatz 1", Guisanplatz 1, 3003 Berne, for the attention of CC WTO Armasuisse, the following points must be observed: - the tenderer must register at the main box, Guisanplatz 1, indicating the title of the project (see figure 7.1). It will then be redirected to the, - the delivery must be made no later than 15:00 hours on the day of the delivery date mentioned in point 7.3, against delivery of an acknowledgment of receipt by the ramp management, - hOpening hours of the ramp management: 7: 00-15: 00 hours (outside these hours, no offer can be made); b) shipping by post: the postage stamp or the barcode of the provider carrying out the shipment is decisive (the date of the stamp affixed by the company is not authentic). c) In the event of delivery to a diplomatic or consular representation of Switzerland: the certificateAcceptance by the representation in question is taken. The acknowledgment of receipt must be sent to the electronic address indicated in section 1.2) at the latest until the deadline for submission of the offer. Remarks (deadline for asking questions in writing). If questions arise during the preparation of the offer, they can be asked exclusively under theform of anonymous questions in the frequently asked questions on the simap.ch site Each question must be asked separately in the forum (one question per entry). The answers are given in the frequently asked questions on the simap.ch site. All questions and answers can be consulted by all the tenderers who have obtained the documentation for the call for tenders. The bidder is lresponsible for inquiring about the questions and answers appearing in the frequently asked questions. National reference publication: SIMAP of 28.1.2020, doc. 1113949. Delai wishes to ask questions in writing: 2.3.2020. File available from 28.1.2020. Conditions for obtaining the tender dossier: the documentation can be downloaded exclusively from pfrom the electronic platform www.simap.ch section. To do this, you must first register in the project in question and you can then access the documentation by means of the Login and password that you will receive by email. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Special-purpose electrical goods was 09 Mar 2020. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPERATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42992000 - Special-purpose electrical goods, 42000000 - Industrial machinery, 42990000 - Miscellaneous special-purpose machinery.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 40141928. The purchaser document reference is 046935-2020.
This tender falls under Technology and Equipment in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.