Tender notice from Switzerland, published on 22 Nov 2019.
Executive Summary
The ARMASUISSE ACHATS ET COOPÉRATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Software programming and consultancy services in the Switzerland. This Tender notice was published on 22 Nov 2019 and is scheduled to close on 16 Dec 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38237092, while the tender notice number is 556079-2019 and Register on the platform.
Key facts
Summary
Contract notice: Software programming and consultancy services
Object of the contract Software programming and consultancy services Description: Contract notice: Software programming and consultancy services Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Restricted procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 72200000, 72230000, 72231000, 72200000, 72230000, 72231000 CPV Description: Software programming and consultancy services. Custom software development services. Development of software for military applications. Application to centralize a billing system The project ZASV-VVA aims to replace the current global NASV system with its computer systems VVAdmin, VVAdmin AT and (optional) VVA (SSV system) through a new global system.This new system must also integrate the function of the Access Pontfaku database. Existing functions should be maintained, or even improved and extended. The user-friendliness of the system needs to be improved, and new interfaces and new Internet services need to be implemented. Main Site: According to documents. The ZASV-VVA project aims to replace thecurrent global NASV system with its computer systems VVAdmin, VVAdmin AT and (optional) VVA (SSV system) by a new global system. This new system must also integrate the function of the Access Pontfaku database. Existing functions should be maintained, or even improved and extended. The usability of the system needs to be improved, and new interfaces have to beas well as new Internet services must be implemented. The proof and proof of fitness listed below must be provided in its entirety with the offer, without restrictions or alterations, otherwise it will not enter into the offer. CAP1, Extract from the register of prosecutions and the commercial register or equivalent official act issued by a foreign authority whichcertifies that the tenderer has no tax debts or is linked to unpaid social contributions (not older than three months, the date of submission of the tender being decisive) CAP2, Declaration of the tenderer CAP3, Certificate of the tenderer tenderer to assume overall responsibility for this project, ie in particular that the tenderer is the onlycontract of the awarding body. The possible persons involved must be indicated in Annex 1.1 with the roles and functions assigned to them. CAP4, Attestation of a single contact point (SPOC) for all commercial processes. CAP5, (a) Compliance with the principles governing the procedure The tenderer certifies that he and thethe third parties it seeks (subcontractors and suppliers) comply with the conditions governing the procedure in accordance with the document (Annex 1.1.1) of the Confederation Procurement Conference (CA). (b) Additional evidence of respect for equality between men and women. Bidders and their first-tier subcontractors who each have more than 50 employeesdemonstrate, beyond the document, how they have examined their salary practice. CAP6, The bidder certifies that all correspondence, negotiations and documentation during commercial relations will take place in German. CAP7, The bidder certifies that it accepts Berne (DDPS) as a place of work for this project as well as for further exploitationsystem (especially for coordination sessions, consultations, etc.) CAP8, The tenderer assumes responsibility for quality assurance of the project. It has sufficient resources and experience to test the solution developed jointly with the user. In addition, the tenderer shall provide a quality manager who cooperates with thequality manager Armasuisse in the framework of this project. CAP9, The tenderer agrees to submit to the secrecy procedure which includes several security measures (see the order concerning the safeguard of secrecy, RS 510.413). The Confederation's information protection requirements (in particular the Ordinance on the protection offormations, RS 510.411) must be applied. Valid for companies and individuals. CAP10, The tenderer certifies that the company is a legal entity under Swiss law. CAP11, The tenderer certifies a single contact point (SPOC) in Switzerland for technical issues throughout the procedure. CAP12, The tenderer certifies that the dataThe test and migration tests provided will not leave Switzerland. CAP13, The tenderer certifies that the persons employed are fluent in German and are also able to express themselves in writing in German. CAP14, The tenderer certifies that the project / mandate will be executed according to the Hermes 5.x project management method and assume responsibility for implementationSuccessful. CAP15, The Bidder certifies that it has sufficient qualified personnel to complete the mandate in a timely manner in accordance with the directives and requirements. CAP16, The Bidder certifies that it can provide training and training services in Switzerland. of assistance to users, in German and French. CAP17, The tenderer, etc. Partial offersare not admitted. Conditions for countries which have not acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only contractors who guarantee compliance with the provisions on the protection of workers, working conditions and equalityof wages between men and women. Other indications: qon the documents. Indication of the remedies: in accordance with art. 30 LMP, this publication may be attacked within 20 days of its notification by the Federal Administrative Court, PO Box, 9023 St. Gallen. The appeal memorial, to be submitted in two copies, will indicate the conclusions, reasons andevidence and shall bear the signature of the Appellant Party or its agent; a copy of this publication and the exhibits invoked as evidence will be attached, where available. Closing time for submission of tenders / remarks: place of deposit: see section 1.2 Important for the respect of the time limit from deposit: a) in the event of a deposit in Armasuisse (Administrative Center Guisanplatz 1): When handing over to Guisanplatz 1, 3003 Bern, for the attention of the WTO Armasuisse CC, the following points must be respected: - the bidder must announce himself at the main lodge, Guisanplatz 1, indicating the title of the project (see figure 7.1). It will then be redirected to the, - the discount must be made no later than 15:30 on the day of the date dthe discount mentioned in point 7.3, on receipt of an acknowledgment of receipt by the Ramp Management, - opening hours of the management of the ramps: 8: 30-16: 00 (outside these hours, no offer will can be postponed) (b) postal mail: the postage stamp or bar code of the delivery service provider is determinative (the stamp date stamped by the company is not(c) in the case of delivery to a diplomatic or consular representation of Switzerland: the certificate of receipt issued by the representation in question shall prevail. The acknowledgment of receipt must be sent to the e-mail address indicated in section 1.2 at the latest until the deadline for submission of the offer. Remarks (time required to ask questions in writing): if any questionsappear in the development of the offer, they can be posed exclusively in the form of anonymous questions in the FAQ simap.ch - Each question must be asked separately in the forum (one question per entry). Answers are given in the Frequently Asked Questions on the simap.ch site - All questions and answers can be consulted at any time.missionaries who obtained the documentation for the call for tenders. The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions. National reference publication: SIMAP of 19.11.2019, doc. 1104805. Deadline for questions in writing: 11.12.2019. Participation documents for the phase of selecare available from 19.11.2019. Conditions for obtaining the tender dossier: the documentation can be downloaded exclusively from the electronic platform www.simap.ch - heading. For this purpose, you must first register in the project in question and you can then access the documentation using the Login and the password you receive.ez by e-mail. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Software programming and consultancy services was 16 Dec 2019. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPÉRATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 72200000 - Software programming and consultancy services, 72230000 - Custom software development services, 72231000 - Development of software for military applications.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38237092. The purchaser document reference is 556079-2019.
This tender falls under Computer Hardware and Software Services, Defence and Security in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.