Contract notice: Recording systems and exploration Tender - 32075792
Tender notice from Switzerland, published on 05 Apr 2019.
Executive Summary
The ADMINISTRATION FÉDÉRALE DES DOUANES, DIVISION GESTION DE LA DEMANDE ET ACQUISITION, SECTION ACQUISITION has issued a Tender notice for the procurement of a Contract notice: Recording systems and exploration devices in the Switzerland. This Tender notice was published on 05 Apr 2019 and is scheduled to close on 13 May 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 32075792, while the tender notice number is 161244-2019 and Register on the platform.
Key facts
Summary
Contract notice: Recording systems and exploration devices
Object of the contract Recording systems and exploration devices Description: Contract notice: Recording systems and exploration devices Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 33120000, 35123500, 33120000, 35123500 CPV Description: Recording systems and exploration devices. Video identification systems. Videoscope for control of cavities difficult to access The device will be used for the thorough search of illegal goods at locations and cavities difficult to access. Main Site : All of Switzerland. The device will be used for the thorough search of illegal goods at locations et in cavities difficult to access. It will be mainly used for the control of vehicles of all kinds, directly on site or in garages planned for this purpose. The videoscope allows to take a look in the cavities without having to remove coatings, hoods and body parts. It thus avoids the damage caused to vehicles, buildings and others.objects by disassembly work. The ability to create documentation using photos and videos of a cache / cavity facilitates the work of the RMC in the preparation of event reports. Proof of suitability mentioned below must be provided / fully enclosed with the tender, without restrictions or modifications, otherwise it will not be relevant to thesupply. CAP1: extracts from the prosecution and trade register: (a) Extract from the prosecution register; and b) Extract from the commercial register or equivalent official foreign documents (not more than 3 months old, the date of reference of the delivery of the documents is decisive), which prove the absence of tax debts or unpaid social security contributions . CAP2: declaration of the foSupplier Declaration of the supplier fully completed and duly signed. Portrait of the company with the organization chart, the legal form and the size of the company, its number of employees as well as its position on the market. Such documentation must be established for the subcontractors also CAP3: Contact person (SPOC) Confirmation of the tenderer that he will have only onecontact point (single point of contact) for all processes such as orders, payments, services. (Data concerning the person and address) CAP4: General responsibility of the project Confirmation of the bidder that he will assume the general responsibility of the project, in particular that he will be the only contractual partner of the bidder. names and rothe third parties should be indicated. CAP5: a) Compliance with the principles governing the procedure Confirmation of the tenderer that he and his subcontractors respect the principles mentioned in the form (Annex 1.1.1) of the Conference of the Confederation Purchases (CA); (b) Supplementary Proof of Respect for Equal Pay for Women and MenMissionaries employing more than 50 people and their first-level contractors who employ more than 50 people must demonstrate respect for equal pay between men and women not only by signing the form, but also by proving that their salary practices have been improved. checked CAP6: reference data Confirmation of the tenderer that he has enoughexperience in the provision of handling equipment meeting the technical requirements indicated in the tender documents. The tenderer must indicate a reference relating to videoscopes in service during the last 5 years (from 2013). CAP7: maintenance / consulting service The tenderer or the manufacturer has a network of techniciansopre (d / f). It must be reachable by telephone on weekdays, from Monday to Friday, from 7:30 to 12:00 and from 13:30 to 17:00, at applicable rates in Switzerland (no value added service number). CAP8: quality management system The tenderer or the manufacturer has a quality management system in accordance with the ISO standard or equivalent. CAP9: repair services Confirmation of the tenderer that he will provide repair services within a period of 15 working days. If this deadline can not be met, the tenderer undertakes to provide a replacement device for the duration of the repair. CAP10: spare parts Confirmation of the tenderer that it will guarantee the availability of all spare parts re-exchange andmaterial of consumption for at least 5 years from the delivery. CAP11: state of the art Confirmation of the tenderer that will deliver at any time, during the period of validity of the contract and the conditions offered, devices corresponding to the state of the art. CAP12: test and presentation devices Bidder's confirmation that it will put a test deviceavailable for free, for a period of about 5 weeks, for quality control purposes. It will have to give a ... Partial offers are not allowed. Conditions for countries not having adhered to the WTO agreements: none. Negotiations: none. The tenderer is invited to submit his best offer. Technical corrections remain reserved. Conditions governing theprocedure: the contracting authority awards public contracts for services in Switzerland only to contractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women. appeal: according to Art. 30 LMP, the present publication can be attacked, in one20 days from the date of its notification to the Federal Administrative Court, PO Box 9023 St. Gall. The appeal memorial, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his representative; will be attached a copy of this publication and the exhibits invoked as evidence, whenthey are available. Closing time for the submission of tenders / Remarks: place of deposit: see figure 1.2: a) For delivery to the Federal Customs Administration: delivery at the latest until 16:00 at the deadline indicated above, with proof of receipt issued by the Federal Customs Administration. Delivery by means of a private courier service is considered to bepersonal issue. In this case, the offer must be submitted to the Federal Customs Office no later than 16:00 (please ask in all cases for an acknowledgment of receipt); b) Shipping by post: the postage stamp or the postage stamp. The barcode of a Swiss post office is decisive. For foreign tenderers, proof of receipt of a diplomatic representationSwiss consular is crucial. (The date of the stamp affixed by the company is not authentic) (c) In the case of submission of an offer to a Swiss diplomatic or consular representation abroad, the tenderer must send by telefax to the contracting authority a copy of the certificate of acceptance issued by the representative in question at the latest until the expiry of the remRemarques Comments (Deadline wishes to ask questions in writing): if questions arise during the development of the offer, they can be posed exclusively in the form of anonymous questions in the FAQs of the site simap .ch. Each question must be asked separately in the forum (one question per entry). Answers are given in the fair to questiofrom the simap.ch website. All questions and answers can be viewed by all bidders who have obtained the tender documentation. The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions. National reference publication: SIMAP 1.4.2019, doc. 1061893. Delay wishes for pdare to ask questions in writing: 6.5.2019. Conditions for obtaining the tender dossier: the documents can be downloaded from the electronic platform www.simap.ch, under the heading. To do this, you must first register under the project mentions. Thanks to your username and password, which is communicated to you by email, you can then telechathe documents desired. For all questions there is one at your disposal. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Recording systems and exploration devices was 13 May 2019. Bidding is closed.
This tender has been issued by ADMINISTRATION FÉDÉRALE DES DOUANES, DIVISION GESTION DE LA DEMANDE ET ACQUISITION, SECTION ACQUISITION in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 33120000 - Recording systems and exploration devices, 35123500 - Video identification systems.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 32075792. The purchaser document reference is 161244-2019.
This tender falls under Materials and Products, Defence and Security in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.