Contract notice: Protective and safety clothing Tender - 34685269
Tender notice from Switzerland, published on 15 Jul 2019.
Executive Summary
The ARMASUISSE ACHATS ET COOPÉRATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Protective and safety clothing in the Switzerland. This Tender notice was published on 15 Jul 2019 and is scheduled to close on 31 Oct 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 34685269, while the tender notice number is 330796-2019 and Register on the platform.
Object of the contract Protective and safety clothing Description: Contract notice: Protective and safety clothing Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 35113400, 35113430, 35113400, 35113430 CPV Description: Protective and safety clothing. Safety vests. Multifunctional bullet-proof vests Multi-function bulletproof vest will be worn by Federal Customs Administration (AFD) and Military Police (PM) personnel as part of the service daily. This is a ballistic protection vest consisting of a basic unit (ballistic protection with protection against knives) andof a variable layer system. The layer system allows wearing the vest as a simple protection under clothing, camouflaged or as a vest visible on clothing. The vest should be distinguished by its lightness and anatomical fit to maximize freedom of movement, flexibility and comfort while providing increased protection. Main Site:The multi-function bulletproof vest will be worn by the Federal Customs Administration (AFD) and Military Police (MP) personnel as part of the daily service. It is a ballistic protection vest consisting of a basic unit (ballistic protection with protection against knives) and a variable layer system. The layer system allowswear the vest as a simple protection under clothing, in a camouflaged way or as a visible vest on clothing. The vest should be distinguished by its lightness and anatomical fit to maximize freedom of movement, flexibility and comfort while providing increased protection. The evidence and evidence of fitness listed below should be provided intin addition to the offer, without restrictions or modifications, otherwise it will not enter into the offer. CAP1, extract from the register of prosecutions and the commercial register or equivalent official act issued by a foreign authority which certifies that the tenderer has no tax debts or unpaid social security contributions (not older than three months, the date ofthe tenderer certifies that he / she bears the overall responsibility for this project, ie in particular that the tenderer is the only contractual partner of the tenderer. the adjudicating body. The prospective persons involved must be indicated in Annex 1.1 with the roles and functions assigned to them. CAP4, attestation of a single point of contact during the tendering procedure CAP5, attestation of a single contact point for all processes such as orders, payment transactions and services. CAP6, (a) Observance of the principles governing the procedure The tenderer certifies that he-as well as the third parties it solicits (subcontractors and suppliers) respect the conditions governing the procedure in accordance with the document (Annex 1.1.1) of the Confederation Procurement Conference (CA). b) Additional proof of the respect for equal pay between women and men. The bidders and their 1-tier subcontractors each having more than 50 collaboratorsRs / trices must demonstrate beyond the document how they have reviewed their pay practices. CAP7, the Bidder certifies that it meets the technical specifications at all levels. CAP8, Bidder's certification that he and his principals subcontractors respect the minimum wages in force in each country where the various components are1.4 of the tenderer's declaration (Annex 1.1). CAP9, the tenderer certifies that the manufacturer is certified according to OHSAS 18001 or that he fulfills the points in the checklist, Annex 1.3. CAP10, at the request of the tendering body, the tenderer is ready to let his infrastructures and those of hise production by an independent audit institute (mission entrusted by the awarding body). The examination shall in particular make it possible to verify the respect of the ILO framework conventions as well as the local conditions of work and safety at work, in accordance with the declaration of the tenderer. The tenderer certifies in writing that he has become aware of the fact that the tender is excluded fromthe procedure if one or more ILO framework agreements or one or more conditions of work and safety at work are not complied with. CAP11, Respect for national legislation for all sectors of environmental protection (air, water, ...) at all stages of the tenderer's process as well as the main subcontractors, according to section 1.4 of the declaration.the tenderer certifies that all correspondence, negotiations and documentation in connection with the establishment of the contract will take place in German. CAP13, the tenderer certifies his specialization in the manufacture and the development of bulletproof vests. It must provide at least 3 references (max 1 reference Armasuisse) certifying the manufacture and delivery by him of ballistic vests since 2013 (order volume ...) Partial offers are not allowed. Conditions for countries that have not adhered to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland onlycontractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women. Other information: according to the documents. Indication of the remedies: in accordance with art. 30 LMP, this publication may be attacked, within 20 days of its notification, at the court admFederal Office, PO Box, 9023 St. Gallen. The appeal memorial, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his representative; A copy of this publication and the exhibits invoked as evidence shall be attached, where available. Closing time for submission of tenders/ remarks: place of depot: see figure 1.2 Important for the respect of the time of deposit: a) in the event of deposit in own hands to Armasuisse (Administrative Center Guisanplatz 1): during the delivery to, Guisanplatz 1, 3003 Bern, Attention the WTO Armasuisse CC, the following points must be respected: - the tenderer must announce himself at the main lodge, Guisanplatz 1, indicating the intitle of the project (see 7.1). It will then be redirected to the, - the discount must be made no later than 15:30 the day of the date of delivery mentioned in point 7.3, against delivery of an acknowledgment of receipt by the management ramps, - hours opening of the management of the ramps: 8:30 - 16:00 (outside these hours, no offer can be given.) b) shipping by post: the tithe postal code or the bar code of the service provider making the shipment is decisive (the date of the stamp affixed by the undertaking is not authentic); (c) in the event of delivery to a diplomatic or consular representation of Switzerland: The certificate of receipt issued by the representation in question is authentic. The acknowledgment of receipt must be sent to the e-mail address indicated in the number 1.2 at the latest until the deadline for the submission of tenders. Remarks (deadline for written questions): if questions arise during the preparation of the tender, they may be asked exclusively in the form of anonymous questions in the simap.ch FAQ - Each question must be asked separately in the forum (one question per entry). The ranswers are given in the simap.ch FAQ - All questions and answers can be viewed by all bidders who have obtained the tender documentation. The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions. National reference publication: SIMAP de lat 10.7.2019, doc. 1085607. Deadline wishes to ask questions in writing: 22.10.2019. File available from 10.7.2019. Conditions for obtaining the bidding documents: the documentation can be downloaded exclusively from the flat electronic form www.simap.ch - heading. For this purpose, you must first register in the project in question and you will be able toThen access the documentation using the login and password that you will receive by e-mail. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Protective and safety clothing was 31 Oct 2019. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPÉRATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 35113400 - Protective and safety clothing, 35113430 - Safety vests.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 34685269. The purchaser document reference is 330796-2019.