Expired Tender Hungary ICB TOT Ref. 42130327

Contract notice: Printing machinery Tender in Hungary - 42130327

Tender notice from Hungary, published on 08 Apr 2020.

Executive Summary

The BÉKÉSCSABA MEGYEI JOGÚ VÁROS ÖNKORMÁNYZATA has issued a Tender notice for the procurement of a Contract notice: Printing machinery in the Hungary. This Tender notice was published on 08 Apr 2020 and is scheduled to close on 11 May 2020, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42130327, while the tender notice number is 166391-2020 and Register on the platform.

Key facts

Summary
Contract notice: Printing machinery
TOT Ref. No.
42130327
Document Ref. No.
166391-2020
Country
Hungary
Notice type
Tender
Competition
ICB
Publication date
08 Apr 2020
Bid deadline
11 May 2020
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Printing machinery
Description: Contract notice: Printing machinery
Authority Type: Regional or local Agency/Office
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 42991200, 42991200, 42991200
CPV Description: Printing machinery.
MVP Printing Equipment
Reference Number: EKR000317922020
The implementation of the Bekescsaba Printing Science Research and Training Center within the framework of the Modern Cities Program (File number: GF / SZKF / 518/7/2017)
Main Site: 5600 Bekescsaba, Gyulai ut 53 57., hrs. 1493 / 13.
Analytical balance, 0.001 g, 1 pc, up to 200 g and with an accuracy of 0.001
Weighing range 1 mg 200 g, 1 pc, Certified weighing range for analytical balance 1 mg up to 200 g
PH scale, 1 pc, Table pH and conductivity measuring device
PH measuring, 1 pc., Portable pH and conductivity measuring equipment
PH measuring, 3 pcs., 100 test strips suitable for measuring the pH of paper raw materials 0 14 pH. 60, 85 for gloss and matt in case of paints and varnishes, with software, certified linefor calibration, suitable for measuring values in the following standards: ISO 2813, ASTM D523, ASTM D2457, ASTM C584, AS 1580 (602.2), BS 3900 D5.
Digital micrometer 0.001 mm, 1 pc. micrometer, 0 10 mm in vertical range
Digitalis micrometer 0.01 mm, 1 pc, for measuring the thickness properties of print medias table-top hand micrometer, in a range of 0 10 mm.
Beck half smoothness, 1 pc. Media is an instrument suitable for measuring stress, wettability, flange, which can be measured in the following standards:Suitable for measuring the values of: TAPPI T458 / ASTM D-724 / ASTM D5946.
Dennison wax series, 1 pc. with light source, 1 pc, to determine the optical brightening content of papers with magnifying glass, white lamp and UV radiation.
Opacitas tester, 1 piece, device suitable for measuring the opacity of low gram papers with 45/0 geometry and CIE C illumination
Cobb tester, 1 piece, device suitable for measuring the water absorption and adhesion properties of papers, compliant with ISO 535: 2014 standard, printing medium
Offset Proofer, 1 pc, Offset Proofing Equipmentinto a ink lab suitable for the complete preparation of a test print. The equipment must include the toner and printing cylinders. The equipment must include the toner and printing rollers.for viscosity adjustment. aluminum
Paint mixer, 300 g, 1 pc, 300 ml (g) for laboratory quantities, for ink labs for making test prints
Paints mixer, 5 kg, 1 pc, Paint mixer for 5 l (kg) production volume, ink mixer, inks for printing pre-preparation
Scales 5 kg, 1 pc Scales up to 5 kg and accuracy 0.05 g, amount of paint
Magnifier 10x, 10 pcs, Ten times the size of a manual magnifier
Spatula, 10 pcs, Plastic, printing inks for mixing in a paint lab
Spatula, 10 pcs, Plastic, printing inks for mixing in a paint lab
Digitalis IR Thermometer, 2 pcs, -50C 180C paints, rollers, rubber cloths for temperature control
Doerzsallosag exam, 1 pcsuitable abrasion and ductility test equipment suitable for gauges according to the following standards: DIN 53 754 - 53 799 - 53 109, DIN EN 438-2
Installation, 1 piece
and training of apprentices. ... Due to character limitations, additional information is provided under the Co-Procurement Documentation
In respect of all parts:
In the procedure it is not possible to be a tenderer, a subcontractor and not to participate in the certificate of suitability of an economic operator against whom the Kbt. One of the grounds for exclusion listed in Section 62 (1) and (2) applies. The tender force is Kbt. - 74 (1) excludes from the procedure the tenderer, subcontractor or
Certification method:
In the case of co-procurement procedures, the suitability and the grounds for exclusion and the technical description of the co-procurement shall be determined. 321/2015. (X. 30.) Government Decree (hereinafter: Government Decree) - 1 (1) andPursuant to Section 3, Paragraphs (2) - (3), the tenderer shall In the co-procurement procedure conducted in accordance with the second part of the Government Decree, the Government Decree II. In accordance with Chapter II, you must prove in advance by submitting the Single European Co-Procurement Document that you do not belong to the Public Procurement Act. Section 62 (1) a) -q), and further (2) a) -b) fpower of the listed kizaro causes ala. Under the tender force, the Kbt. Pursuant to Section 69 (4) - (7), the tenderer invited to submit certificates relating to the grounds for exclusion shall be required to comply with the provisions of Art. The grounds for exclusion listed in Section 62 (1) - (2) shall not apply to Government Decree 1 Section 8 except Section 8 (i) (ib), Section 10 or Section 10 (g) (gb) and 12 - 16. The offerIn the case of a subcontractor or other capacity-providing organization / person participating in the attestation of suitability, only the Single European Procurement Document may be submitted to the Public Procurement Office. Exclusion of the grounds for exclusion contained in Section 62, Paragraphs (1) - (2), in order to prove the absence. In the Single European Document, the economic operator (the tenderer and, where appropriate, theet / person) declares that the reasons for exclusion do not apply to him, he gives the garden information in the procedure. The statement must contain an indication that the Kbt. Pursuant to Section 69 (4), which body is entitled to issue the certificate to be submitted, as well as the Public Procurement Act. Brings the necessary data for the application of the database pursuant to Section 69 (11) and, in case of needajarulo statement. Bidder force draws the attention of bidders to the Kbt. The possibility of cleansing included in - 64. With regard to the grounds for exclusion, certificates issued prior to the commencement of co-procurement may also be submitted (used) as long as the content of the facts and data contained in the certificates is true. Unless proven otherwise, the validity of the data is recommendedkueloen`s declaration to that effect. Failure to provide proof of grounds for exclusion shall not result in the submission by the economic operator of a certificate which has already been submitted electronically in the EDF by the economic operator in the previous tendering procedure for the same tenderer. In this case, the economic operator shall declare which of the previous proceedingsthe certificate submitted will be taken into account during the administration. The tenderer shall examine whether the certificate previously submitted complies with the substantive requirements for the certificate to be submitted in the specific procurement procedure, and whether the previous certificate shall indicate, where appropriate, the intended use of the procurement procedure. Section 67 (4)Pursuant to paragraph 1 of the Public Procurement Act, the tenderer must declare that it does not comply with the provisions of Art. Subcontractor subject to the exclusionary reasons pursuant to Section 62 of the Public Procurement Act. Pursuant to Section 67 (1), the tenderer is obliged to submit the declaration included in the Single European Co-Procurement Document in respect of the suitability requirements.The tender force is 321/2015. (X. 30.) K.r. Pursuant to Section 2 (5), the applicant shall accept a simple declaration for the preliminary attestation of the aptitude requirements. A Kbt. Section 65 (1) (a)having regard to Regulation 321/2015 (X. 30.) on the basis of Section 19 (1) (c) of the Government Decree on the three years prior to the invitation to tender, for the business year closed on the balance sheet date (Part 1: printing material laboratory instruments Part 2: ICT tools - delivery and entry into service of the declaration)Depending on when the tenderer has taken up his activity or when he has started an activity, if this information is available. does not have the document referred to in point (a) because it operates in a legal form in respect of which it is not possible to submit a declaration of entry, instead, he may prove his financial and economic capacity by any other declaration or document deemed appropriate by the tenderer. In seeking additional information from the tenderer concerned, it must be proved that it is operating in a legal form in respect of which it is not possible to obtain information on this point.Instead of the required standard of proof and proof of suitability, the method of proof of suitability accepted by the tenderer shall be provided. Pursuant to Section 65 (6), co-tenderers may meet the required suitability requirements together, or those requirements which, by definition, may be applied exclusively to economic operators, the association may comply with the requirements.meaning is sufficient if koezueluek one meets.
1. The detailed conditions of the tender and the formal requirements for the submission of the tender are contained in the Procurement Documents. There is no obligation to perform tender insurance. Ak does not allow the establishment of a host organization (project company) in the interest of the contractor. akthe aptitude requirements (III.1.2) are set out in point P.1. III.1.3) M.1.) Defined the image of the list of qualified tenderers more strictly. Lower and upper limit of the score that can be given during the evaluation of the content elements of the tenders according to the sub-criteria: 0 10 points. Valuable method: in the case of the ar aspect it is reverse gold plating, in the case of qualitative aspects it is straight gold. The methodThese are detailed in the Co-Procurement Document.
6. The tender must be accompanied by:
- a reading form (relevant content elements: tenderer`s name, place of business, main, quantifiable data according to the court`s criteria)
- if, according to the tenderer`s excerpt, the tenderer
- The tender must be accompanied by a certificate from the tenderer (s) certifying the suitability of the tenderer (s). okmanyat (Section 9 (1) of the 5th Act of 2006)If an alairo does not fall under the authority of the 5th year of the 2006 Act, the tenderer will also accept a document certified by the co-notary or by a certificate or two doctors,
- the Public Procurement Act. A statement pursuant to Section 66 (2),
- the Kbt. 66. (6), company-like alairt statement (even in case of negative content),
- the Kbt.Section 67 (4), company-specific declaration,
- professional offer (Technical Description / brochure of the recommended products, which contains at least the name of the manufacturer of the products, the type of the products, the place of origin, technical parameters. KD included)
- details of the offer price (with the units of the recommended tools KDwith the exception of reset image art forms, and also in editable excel format)
7. Ak does not apply the Public Procurement Act in the present proceedings. Reason for failure pursuant to Section 75 (2) (e). FAX:
Name: Dr. Anita Sodar
Registration number: 00093
Mailing address: 5600 Bekescsaba, Szent Istvan ter 10.
e-mail address: [email protected]
Phone: 36 66241781
Fax: 36 66241780
9.In the offer, we can only offer new (manufacturing years 2018 or 2019) devices and equipment that have a Hungarian language machine certificate and a CE certificate, according to which they comply with the relevant European Union rules and directives. ... For more information on character limitation, see VI.4.3) Lodging of appeals.
Internet address (URL): http://www.bekescsaba.hu

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Dbr - Procurement of Drinking Water Pumps Hungary 152543263 17 Jan 2029
Delivery of Auma Gear Parts Hungary 152539788 30 Nov 2026
Refrigeration Modernization of Debrecen Ice Hall Hungary 152439021 27 Nov 2026
I Make a Convection Oven. Air Conditioner Parts Hungary 152438884 11 Dec 2026
I Make a Convection Oven. Air Conditioner Parts Hungary 152386079 11 Dec 2026

Hungary Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Printing machinery was 11 May 2020. Bidding is closed.

This tender has been issued by BÉKÉSCSABA MEGYEI JOGÚ VÁROS ÖNKORMÁNYZATA in Hungary.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 42991200 - Printing machinery.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 42130327. The purchaser document reference is 166391-2020.

See the Similar Tenders section on this page or browse other tenders from Hungary.

This tender falls under Technology and Equipment in Hungary. Suppliers in these sectors can track similar Hungary tenders using CPV-based alerts.