Expired Tender Poland ICB TOT Ref. 32319471

Contract notice: Printers and plotters Tender in Poland - 32319471

Tender notice from Poland, published on 16 Apr 2019.

Executive Summary

The POLITECHNIKA OPOLSKA has issued a Tender notice for the procurement of a Contract notice: Printers and plotters in the Poland. This Tender notice was published on 16 Apr 2019 and is scheduled to close on 30 May 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 32319471, while the tender notice number is 177373-2019 and Register on the platform.

Key facts

Summary
Contract notice: Printers and plotters
TOT Ref. No.
32319471
Document Ref. No.
177373-2019
Country
Poland
Notice type
Tender
Competition
ICB
Publication date
16 Apr 2019
Bid deadline
30 May 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Printers and plotters
Description: Contract notice: Printers and plotters
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 30232100, 34144440, 42300000, 42123400, 42999100, 30232100, 34144440, 42300000, 42123400, 42999100
CPV Description: Printers and plotters.
Gritters vehicles.
Air compressors.
Non-domestic vacuum cleaners.
Delivery, installation and commissioning of laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design at the Faculty of Mechanical Engineering Politechniki Opolska
Reference Number: ZP / D / 22/2019
1. The subject of the order is: Supply, installation and commissioning of laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design at the Faculty of Mechanical Engineering of the Opole University of Technology. A detailed description of the subject of the order is attached as Appendix 3 to SIWZ.
Main Site: Faculty of Mechanical Engineering of the Opole University of Technology, ul. Stanisława Mikołajczaka 5, 45 -2741 Opole, POLAND
The object is to order themst: Supply, installation and commissioning of laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design at the Faculty of Mechanical Engineering at the Opole University of Technology. A detailed description of the subject of the order is provided in Annex 3 to the ToR.
- The contractor must prove that he is insured against civil liability in order to confirm his economic situation.scope of activities related to the subject of the order (eg liability policy) for a guarantee sum not less than PLN 1, 000, 000.00 (one million zlotys);
If the Contractor presents in the offer the sum insured in a currency other than PLN, the conversion will be made according to the average exchange rate of the National Bank of Poland on the opening of the procedure (ie the date of publication of the contract notice in the Official JournalIn the case of a joint bid, the above condition will be fulfilled if any of the contractors submitting a joint offer will have a document confirming that the contractor is insured against civil liability for the guarantee sum required by the ordering party. The Contracting Authority allows summing the value of policies held by contractors submitting bidscommon to meet the condition of the economic situation. The Purchaser will assess compliance with the above condition based on the statement referred to in Chapter VI, para. 1 point 1 of the SIWZ, submitted in the form of a Single European Order Document and a document confirming (eg an OC policy), that the Contractor is insured against civil liability, as required by the Ordering Partyit is the guarantee sum referred to in Chapter VI, para. 4 point 1 SIWZ (applies to the Contractor whose offer will be considered the most advantageous);
- The Contractor, in order to confirm the financial situation, must demonstrate possession of financial resources or creditworthiness in the amount not less than PLN 1, 000, 000.00 (one million zlotys)
If The Contractor will present in the offer the sum of owned funds orcreditworthiness in a currency other than PLN, the conversion will be made according to the average NBP exchange rate on the day of initiation of proceedings (ie the date of publication of the contract notice in the Official Journal of the European Union)
In the case of a joint bid, the above condition will be met if any of the contractors submitting the offer jointly will have a document confirming that youthe Contractor has financial means or creditworthiness in the amount not less than PLN 1, 000, 000.00 (one million zlotys). The Contracting Authority allows the aggregation of the value of financial assets or creditworthiness by the contractors submitting the joint offer in order to meet the condition of financial situation jointly. The Purchaser will assess the fulfillment of the above condition on the basis of the declarationreferred to in Chapter VI, para. 1 point 1 SIWZ, submitted in the form of a Uniform European Order Document and a confirmation document (eg information from a bank or cooperative savings and credit institution, confirming the amount of financial resources held or creditworthiness of the Contractor in the period not earlier than one month before the deadline for submission of tenders, in highat least PLN 1, 000, 000) referred to in Chapter VI, para. 4 point 2 SIWZ (applies to the Contractor, whose offer will be considered the most advantageous);
Description of the way of preparing offers.
1. Basic requirements:
1.1. each Contractor may submit only one offer,
1.2. the offer should be prepared strictly according to the requirements set out in this ToR,
2. The Contractor submits the offer via the Formand to submit, change, withdraw the offer or application available on ePUAP and also made available on the miniPortal.
The public key necessary to encode the offer by the Contractor is available to the Contractors on the miniPortal.
3. The offer should be made in the Polish language, keeping the electronic form in the data format -.pdf; .doc; .xls; .csv and signed with a qualified elektroni signature• The method of submitting the offer, including the encryption of the offer, is described in the Regulations for the use of miniPortal. The offer should be submitted in the original.
4. Any information constituting a company secret within the meaning of the Act of 16.4.1993 on Combating Unfair Competition, which the Contractor reserves as a trade secret, should be submitted in a separate file along withby selecting the "Business secret attachment" and then with the files constituting the explicit part compressed into one archive file (ZIP).
5 The offer should be accompanied by the Single European Order Document in an electronic form with a qualified electronic signature, and then with the files constituting the offer to be compressed into one file archivum (ZIP).
6. The Contractor may, before the deadline for submission of tenders, change or withdraw the offer via the Form to submit, change, withdraw the offer or application available on ePUAP and also made available on the miniPortal. The method of changing and withdrawing the offer has been described in the User Manual available on the miniPortal.
7. The Contractor after the deadline for submission of offers can not bemake a change or withdraw your submitted tender.
8. Form of the offer:
8.1. the offer will be prepared in Polish language,
8.2. the offer and the statement referred to in art. 25a uPzp, including a uniform document (EAT), shall be made, under pain of nullity, in electronic form and shall be provided with a qualified electronic signature;
9. The offer must consist of:
9.1. documents and declarationwhich are referred to in Chapter VI, para. point 1 of the ToR,
9.2. Contractor's tender form Annex No. 1 to the ToR,
9.3. to demonstrate the reservation of information constituting a trade secret in accordance with point 10 below (if applicable),
9.4. power of attorney (if applicable) - Proxy must be submitted in electronic form signed with an electronic qualified signature. However, inIf the Contractor will only have a power of attorney in writing, he shall submit it in the form of an electronic statement of compliance of the copy, excerpt or copy with the document presented, which the notary provides with a qualified electronic signature (Article 97 - 2 of the Notary Public). Then an offer in electronic form should be accompanied by a copy of the power of attorney prepared by a notary public in foelectronic engine.
Internet address (URL): https://www.po.opole.pl/

Documents

Tender Notice
Login to view

Similar tenders

Poland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Printers and plotters was 30 May 2019. Bidding is closed.

This tender has been issued by POLITECHNIKA OPOLSKA in Poland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 30232100 - Printers and plotters, 34144440 - Gritter vehicles, 42300000 - Industrial or laboratory furnaces, incinerators and ovens, 42123400 - Air compressors, 42999100 - Non-domestic vacuum cleaners.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 32319471. The purchaser document reference is 177373-2019.

See the Similar Tenders section on this page or browse other tenders from Poland.

This tender falls under Computer Hardware and Software Services, Materials and Products, Technology and Equipment in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.