Contract notice: Presses Tender in United Kingdom - 18064806
Tender notice from United Kingdom, published on 08 Nov 2017.
Executive Summary
The UNIVERSITY OF STRATHCLYDE has issued a Tender notice for the procurement of a Contract notice: Presses in the United Kingdom. This Tender notice was published on 08 Nov 2017 and is scheduled to close on 11 Dec 2017, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 18064806, while the tender notice number is 444289-2017 and Register on the platform.
Object of the contract Presses Description: Contract notice: Presses Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42636000, 42636000 CPV Description: Presses. Supply, Delivery Installation and Commissioning of a Platen Press for the AFRC. Reference Number : UOS-11036-2017 The University of Strathclyde's Advanced Forming Research Centre (AFRC) requires a Supplier to configure, manufacture, install and commission a hydraulic platen press for its new Lightweight Manufacturing Centre. This press will require high precision temperature and pressure control for accuracy, resolution and repeatability in order to provide a highly instrumented system for operational control of inputs and outputs. The system will be installed at AFRC, Westway Park, Porterfield Road, Renfrew. Main Site : Advanced Forming Research Centre, 85 Inchinnan Drive, Inchinnan, Renfrew, PA4 9LJ. The press will support the development of a wide range of improved, high integrity composite components for challenging applications. It will address the requirement for a pilot scale facility to establish the processing parameters required for the production of advanced composite materials. The AFRC requires the platen press to investigate various aspects of composite components for structural capability. The system shall be: based upon a hydraulic press having 4 pistons; capable of temperatures in excess of 390C; have a fast ramping cycle for lower temperatures; feature an oil-heating system; and have slow-close adjustable speed. Machine operation for programming and operation shall be contained within a switch cabinet. The press shall operate in several operating modes with multiple program steps per mode. Please refer to Appendix L Guidance Notes for the ESPD in the General Attachments area of PCS-T for full details on the minimum technical and financial criteria for participating in this contract. Tenderers should note the criteria for Part 4C.1.2 Services of the ESPD, contained in the Qualification envelope of PCS-T. The criteria required for examples is as follows: Criteria: Examples must be sufficient enough to pass aeronautical standards (e.g. Airbus, Boeing standards). We need a system able to manufacture glass fibre reinforced plastic (GFRP) and carbon fibre reinforced plastic (CFRP) for advanced composite manufacture 2m (of micro-scale 10 - 6 m; and nano-scale 10 - 9 m). For fibres including glass, carbon, graphite and Kevlar. Laminar layups expected to be unidirectional, cross-ply, quasi-isotropic, transversely isotropic, chopped strand. Matrix materials expected to include polymers: epoxy, polyamide, phenolics, acrylic, urethane. System expected to hand wet and dry lay-ups (pre-pregs in standard widths: 76 mm to 1 270 mm). III.1.1) of the notice is not applicable to this procurement exercise. Please refer to these statements when completing section 4B of the ESPD (Scotland). Statement 4B.1.2. Bidders will be required to have an average yearly turnover of 1 000 000 GBP for the last 3 years. Statement for 4B.3. Where turnover information is not available for the time period requested, the bidder will be required to state the date which they were set up or started trading. Statement for 4B.5.1 — 4B.5.3 It is a requirement of this contract that bidders hold or can commit to obtain prior to the commencement of any subsequently awarded contract, the types of insurance indicated below. Employer's (Compulsory) Liability Insurance = 5 000 000 GBP. Public Liability Insurance = 5 000 000 GBP. Product Liability Insurance = 5 000 000 GBP. Statement for 4B.6 The Contracting authority also reserves the right to undertake a credit risk rating check on Bidders. Should such checks be deemed appropriate to this procurement, the Contracting Authority shall utilise Dun and Bradstreet (D&B) credit check facility. Bidders must therefore evidence a good credit rating. In this instance, a good rating is defined as a D&B Failure Score of 20 or above. The Contracting Authority recommends that Bidders review their own D&B failure Score in advance of submitting their response. If, following this review Bidders consider that the D&B Failure Score does not reflect their current financial status the Bidder should give an explanation within the submission, together with any relevant supporting independent evidence. The Contracting Authority will review any such information as part of the evaluation of Bidder's financial status. Where the Bidder is under no obligation to publish accounts and therefore does not have a D&B Failure Score, they must provide their audited financial accounts for the previous 2 years as part of their submission in order that the Contracting Authority may assess these to determine the suitability of the Bidder to undertake a contract of this size. Where a consortium response is received, the D&B Failure Score of each consortium member shall be assessed. Where the Bidder intends to sub-contract more than 25 % of any Contract value of a single sub-contractor, the Contracting Authority reserves the right to assess each sub contractor. Should the Contracting Authority utilise the right to consider the D&B Failure score, Bidders who fail to achieve a minimum D&B failure score of 20 and above or fail to provide sufficient financial information (as above) to enable the Contracting Authority to undertake a financial assessment of their company may be excluded from this procurement exercise. 4D.1 Quality Assurance The bidder must gold a UKAS (or equivalent) accredited independent third party certificate of compliance in accordance with BS EN ISO 9001 (or equivalent). 4D.2 Environmental Management Standards The bidder must hold a UKAS (or equivalent) accredited independent third party certificate of compliance with BS EN ISO 14001 (or equivalent) or a valid EMAS (or equivalent) certificate. Part 3: Exclusions Economic Operators may be excluded from this competition if they are in any of the situations referred to in regulation 58 of the Public Contracts (Scotland) Regulations 2015. 4. Sub- contractors — Economic operators may be excluded from this competition if they are in any of the situations referred to in regulation 8 and 9 of the Procurement (Scotland) Regulations 2016. Award Criteria The Price/Technical split for this ITT will be 70 % Technical/30 % Commercial. The following scoring mechanism will be applied to the Quality Evaluation. The award criteria questions and weightings will be published in the ITT. 0 Unacceptable: Nil or inadequate response. Fails to demonstrate an ability to meet the requirement. 1 Poor: Response is partially relevant and poor. The response addresses some elements of the requirement but contains insufficient/limited detail or explanation to demonstrate how the requirement will be fulfilled. 2 Acceptable: Response is relevant and acceptable. The response addresses a broad understanding of the requirement but may lack details on how the requirement will be fulfilled in certain areas. 3 Good: Response is relevant and good. The response is sufficiently detailed to demonstrate a good understanding and provides details on how the requirements will be fulfilled. 4 Excellent: Response is completely relevant and excellent overall. The response is comprehensive, unambiguous and demonstrates a thorough understanding of the requirement and provides details of how the requirement will be met in full. Technical Questionnaire: Section overall Weight = 70 % of tender response. Q1. Overall requirement 15 %. Q2. Specification 20 %. Q3. Control System Requirements 15 %. Q4. Automation and Integration 20 %. Q5. Commissioning and Production Support 15 %. Q6. Demonstration 15 %. The buyer is using PCS-Tender to conduct this tendering exercise. The Project code is 9154. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343 A sub-contract clause has been included in this contract. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2363 The Contracting Authority does not intend to include any community benefit requirements in this contract for the following reason: The Contracting Authority recognises that community benefits are a key component in maximising social, economic and environmental benefits. The achievements and delivery of community benefits can contribute to the University of Strathclyde's Strategic Plan. The Contracting Authority proposes to use a Voluntary Approach to Community Benefits for this requirement; this approach is to encourage the Tenderer to offer Community Benefits post tender. These will not form part of the contractual obligation and will not form part of the considerations at Tender evaluation stage. The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer either intended as partial replacement of supplies or installations or as the extension of existing supplies or installations. The Contracting Authority may at its sole discretion exercise this option. The terms and conditions governing this contract will be the University of Strathclyde's Standard Conditions of Purchase for Goods and Services, and the additional terms of contract at Part 2 of the Invitation to Tender. The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 9154. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343 (SC Ref: 515071). Internet address (URL): http://www.strath.ac.uk/ Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Presses was 11 Dec 2017. Bidding is closed.
This tender has been issued by UNIVERSITY OF STRATHCLYDE in United Kingdom.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42636000 - Presses.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 18064806. The purchaser document reference is 444289-2017.
This tender falls under Technology and Equipment in United Kingdom. Suppliers in these sectors can track similar United Kingdom tenders using CPV-based alerts.