Contract notice: Parts for aircraft Tender in Denmark - 38087506
Tender notice from Denmark, published on 19 Nov 2019.
Executive Summary
The DANISH DEFENCE ACQUISITION AND LOGISTICS ORGANIZATIONS has issued a Tender notice for the procurement of a Contract notice: Parts for aircraft in the Denmark. This Tender notice was published on 19 Nov 2019 and is scheduled to close on 17 Dec 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38087506, while the tender notice number is 546394-2019 and Register on the platform.
Object of the contract Parts for aircraft Description: Contract notice: Parts for aircraft Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Competitive procedure with negotiation Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 34731000, 34700000, 34710000, 34711000, 34711100, 34730000, 35642000, 34731000, 34700000, 34710000, 34711000, 34711100, 34730000, 35642000 CPV Description: Parts for aircraft. Aircraft and spacecraft. Helicopters, aeroplanes, spacecraft and other powered aircraft. Helicopters and aeroplanes. Aeroplanes. Parts for aircraft, spacecraft and helicopters. Electronic and electrical spare parts for military aerospace equipment. Avionics Update of the Royal Danish Air Force Fleet of Four (4) CL-604 The Danish Defence Acquisition and Logistics Organization (DALO) is going to update the Royal Danish Airforce (RDAF) fleet of 4 Bombardier Challenger 604 aircraft to meet mandates and ensure airworthiness for the next 20 years. Main Site : The update of the Royal Danish Air Force fleet of four (4) CL-604 aircraft are going to take place at the suppliers preferred place of performance. The update of RDAF fleet of 4 Bombardier Challenger 604 aircraft consists of the following: A basic STC certified cockpit upgrade to Rockwell Collins Pro Line Fusion or equivalent. The basic cockpit upgrade shall be a FAA and/or an EASA approved STC at the time of INDO1 and an EASA approved STC at the time of delivery of first updated CL-604. If the basic cockpit upgrade is a FAA approved STC, an EASA STC approval process shall be initiated at the time of INDO1. A customised cockpit upgrade that combines the upgraded basic cockpit with advanced functionalities and interfaces to new and existing military equipment. For the 3 missionized aircraft the customised cockpit upgrade shall include: — replacement of an existing Direction Finder (DF) with a new DF supplied by DALO, — installation of 2 Control Display Units(CDU-7000) supplied by DALO, — Removal of an existing VHF/UHF Homing system, — installation of a 406 MHZ capable ELT with navigation system interface. An Initial package of spare parts shall be delivered together with the cockpits. An upgrade of existing Inmarsat SATCOM systems. The tenderer shall install 4 JetWaveTM KA-BandSATCOM systems provided by DALO. An installation of new Iridium SATCOM system. The tenderer shall provide and install 4 Iridium SATCOM systems, 1 for each aircraft. Initial training of both pilots and maintenance personal covering the basic and customised cockpit upgrades. 3 aircraft have been modified with missionized equipment in several stages at multiple locations: at Bombardier (the Original Equipment Manufacturer), at Field Aviation and at RDAF. The fourth aircraft is a normal customised aircraft. A list of all Service Bulletins pertaining to the RDAF CL-604 aircraft is available during the tender stage. In order for the tenderer to fulfill the contract, it will be necessary for the tenderer to obtain more data than mentioned in the list of all Service Bulletins. DALO expects that it will be necessary for the tenderer to — at least — obtain the data specified in instructions to tenderers, Section 2.1. It is a mandatory requirement, cf. Annex A, Id. No 1, that the tenderer shall be able to obtain all the data that is necessary in order to fulfill the contract. It is solely the tenderer's responsibility to ensure that the tenderer is capable of obtaining all data needed in order to fulfill the contract. It is a mandatory requirement, cf. Annex A, Id. No 2, that the tenderer shall describe how the tenderer will ensure that the tenderer has all necessary data in order to fulfill the contract. For the contents of this description please see Section VI.3). If this is not described in a way that DALO finds sufficient, the mandatory requirement is not fulfilled (which means that the offer made by the tenderer is non-compliant). In order to demonstrate that the tenderer fulfills Annex A, Id. No 1, the tenderer shall present declarations signed by Bombardier and Field Aviation respectively (as further described in the instructions to tenderers, Section 2.1 and Annex, Id. No 3 and 4). The above-mentioned mandatory requirements imply that the tenderer before submitting INDO1 must contact Bombardier and Field Aviation in order to obtain the declarations. The tenderers are encouraged to contact Bombardier and Field Aviation as soon as possible (after this contract notice has been published), as the drafting of the declaration and discussions between the tenderer and Bombardier/Field Aviation regarding the declarations may take some time. Reference is made to Section 2.1 in the instructions to tenderers for further details and as for the agreements that DALO expects that the tenderer — if awarded the contract — shall enter into with Bombardier, Field Aviation and DALO. The use of the ESPD is a precondition for participation in the procurement procedure, cf. § 148 of the Public Procurement Act. DALO shall require that the candidate apply the ESPD as preliminary evidence that the candidate is not subject to the grounds of exclusion stipulated in §§ 135 and 136 of the said Act, that the candidate fulfils the minimum requirements for suitability fixed in accordance with § 140, cf. III.1.3) and how the candidate fulfils the objective and non-discriminatory criteria of selection, cf. § 145(2), cf. Section II.2.9). The candidate and, if relevant, the participants in the group of entities or/and entities on which the candidate relies on, must use the electronic version of the ESPD available at ETHICS' web portal. The ESPD shall be fulfilled and submitted at ETHICS' web portal in accordance with the instructions given by ETHICS. Prior to decision on award of the contract, DALO shall require that the tenderer to whom DALO intends to award the contract presents documentation for the information stated in the ESPD, cf. §§ 151-155 of the said Act. If a candidate relies on the capacity of other entities, cf. Section III.1.3), the candidate shall upon request provide statements of support or other documentation proving that the candidate has access to the necessary technical and professional capacity and that the entity referred to has a legal obligation to the candidate. If such documentation is not provided, DALO cannot consider the technical and professional capacity of the other entity or entities. DALO has prepared a template to be used to confirm the legal obligation which is available at ETHICS. DALO strongly encourages the candidates to use this form. However, it is emphasized that it is the sole responsibility of the candidate that the information provided fulfils the requirements DALO shall exclude a candidate from participation in the procurement procedure, if the candidate is subject to one of the compulsory grounds for exclusion in §§ 135 and 136 of the said Act unless the candidate has provided sufficient documentation that the candidate is reliable in accordance to § 138 of the said Act. Please note that certain voluntary exclusion grounds in Directive 2014/24/EU on public procurement have been made compulsory in § 136 of the said Act. Regarding Section II.2.4): according to Annex A, Id. No 2 it is a requirement that the tenderer shall describe how the tenderer will ensure that the tenderer has all necessary data in order to fulfill the contract including describe which agreements the tenderer will enter into with Bombardier, Field Aviation and DALO if awarded the contract. Further, the tenderer shall describe whether Bombardier and Field Aviation respectively will release the data that the tenderer deems necessary — and if not, describe which specific data Bombardier and Field Aviation respectively will not release. Furthermore, the description made by the tenderer shall include information on the prices (specific amounts) that Bombardier and Field Aviation respectively have claimed for releasing the data, if Bombardier and Field Aviation have claimed to be paid. If all this is not described in a way that DALO finds sufficient, the mandatory requirement is not fulfilled (which means that the offer made by the tenderer is non-compliant). For further information regarding this procurement, please see the enclosed document 'Additional information to Contract Notice'. Internet address (URL): https://www.ethics.dk/ethics/eo#/7528351a-26e3-4d04-a319-272d3b7d451d/homepage
The bid deadline for Contract notice: Parts for aircraft was 17 Dec 2019. Bidding is closed.
This tender has been issued by DANISH DEFENCE ACQUISITION AND LOGISTICS ORGANIZATIONS in Denmark.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 34731000 - Parts for aircraft, 34700000 - Aircraft and spacecraft, 34710000 - Helicopters, aeroplanes, spacecraft and other powered aircraft, 34711000 - Helicopters and aeroplanes, 34711100 - Aeroplanes, 34730000 - Parts for aircraft, spacecraft and helicopters, 35642000 - Electronic and electrical spare parts for military aerospace equipment.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38087506. The purchaser document reference is 546394-2019.
This tender falls under Materials and Products, Defence and Security in Denmark. Suppliers in these sectors can track similar Denmark tenders using CPV-based alerts.