Tender notice from Poland, published on 16 Jan 2018.
Executive Summary
The MIASTO KALISZ has issued a Tender notice for the procurement of a Contract notice: Numerically-controlled machines for metal in the Poland. This Tender notice was published on 16 Jan 2018 and is scheduled to close on 22 Feb 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 19811183, while the tender notice number is 017748-2018 and Register on the platform.
Key facts
Summary
Contract notice: Numerically-controlled machines for metal
Object of the contract Numerically-controlled machines for metal Description: Contract notice: Numerically-controlled machines for metal Authority Type: Regional or local authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42632000, 42621100, 51500000, 51530000, 42632000, 42621100, 51500000, 51530000, 42623000, 42670000 CPV Description: Numerically-controlled machines for metal. CNC lathe. Installation services of machinery and equipment. Installation services of machine tools. Milling machines. Parts and accessories of machine tools. Dostawa i montaż wyposażenia do Centrum Kształcenia Ustawicznego i Praktycznego przy ul. Handlowej 9 w Kaliszu w podziale na 6 Części Reference Number : WRI.271.01.2.2018 1. Przedmiotem zamowienia jest delivery and assembly of equipment for the Center for Continuing and Practical Education at ul. Handlowa 9 in Kalisz, as well as the provision of warranty service on terms contained in the ToR, including the draft contract. Main Site: Centrum Kształcenia Ustawicznego i Praktycznego at ul. Handlowa 9 in Kalisz. 1. The subject of the order in this part of the order (Part 1) is the delivery of the numerical lathe CNC Type 1 with unloading, foundation at the place of use, assembly and start-up, as well as the provision of warranty service on terms contained in the ToR, including the draft contract. 2. A detailed description of the subject of the order, requirements related to the implementation of the subject of the contract are included in the ToR and annexes to it. 3. Delivery of the item, including unloading, foundationsat the place of use, assembly and start-up must take place no later than 15/06/2018 4. The subject of the order is covered by co-financing from the centers of the European Regional Development Fund under the Wielkopolska Regional Operational Program for 2014-2020 under the Project entitled "Kalisz - space for professionals. Modern workshops are the key to successesu Agglomeracji Kalisko-Ostrowskiej "No. RPWP.09.03.05-30-0003 / 16-00. 5. The Contractor is obliged to provide in the table contained in the" Offer form "data on the products offered to the extent specified there. A. Contractors who are not subject to exclusion from the proceedings under Art. 24 sec. 1 item 12-22 and art. 24 sec. 5 points 1, 8-Public Procurement Law. The Awarding Entity does not specify the conditions for participation in the proceedings referred to in art. 22 ust. 1 point 2 of the Act. B. The Contractor is obliged to attach to the offer valid as of the day of submitting the offers a statement constituting preliminary confirmation that the Contractor is not subject to exclusion from the proceedings, submitted in the form of a single European order document (EAT) prepared in line with them of a standard form defined in the European Commission's implementing regulation issued on the basis of art. 59 par. 2 of Directive 2014/24 / EU. In addition, in the case of Contractors jointly applying for the order, the form JEDZ shall submit each of these Contractors. C. In order to confirm the absence of grounds for exclusion of the Contractor from participation in the proceedings only at the request of the Awarding Entitythe offender is obliged to submit the following statements and documents: 1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 point 13, 14 and 21 of the Act issued not earlier than 6 months before the deadline for submitting bids; 2) certificate of the competent head of the tax office confirming that the Contractor is not in arrears with paying taxes, issued no earlier than 3 m- before the deadline for submitting offers or applications for admission to participate in the proceedings, or other document confirming that the Contractor has entered into an agreement with the competent tax authority regarding repayment of such receivables with possible interest or fines, in particular obtained legally, exemption or deferral spreading overdue payments into installments or suspending in-the implementation of the decision of the competent authority, 3) a certificate of the relevant organizational unit of the Social Insurance Institution or Agricultural Social Insurance Fund or other document confirming that the Contractor is not in arrears with paying social security or health insurance contributions, issued not earlier than 3 months before the end of the deadline for submitting offers or applications forrelease to participate in the proceeding, or other document confirming that the Contractor has entered into an agreement with the competent authority regarding the repayment of such receivables with possible interest or fines, in particular obtained legally permissible, postponement or payment of overdue payments or full suspension of the implementation of the decision competent authority; 4) excerpt from the relevant regester or from central records and information about business activities, if separate regulations require an entry in the register or records, in order to confirm the absence of grounds for exclusion pursuant to art. 24 sec. 5 point 1 of the Act; 5) declaration of the Contractor about the lack of issuing a final court decision or final administrative decision on default in payment of taxes, fees or chargeson social security or health insurance, or in the event of issuing such a verdict or decision documents confirming payment of these receivables with possible interest or fines or conclusion of a binding agreement on repayment of such receivables; - 6) declaration of the Contractor about the lack of a ruling against him as a preventive measure apply for pub ordersnumerous; 7) declaration of the Contractor about not paying taxes and local fees, referred to in the Act of 12.1.1991 on local taxes and charges. Continued in point III.1.2) of this announcement. content from item III.1.1) of this announcement. D The Contractor having its registered office in the territory of the Republic of Poland, in relation to the person having a place of intentoutside the territory of the Republic of Poland, which is referred to in the document indicated in point III.1.1) C.1) of this announcement, submit information from the relevant register or, in the absence of such a register, another equivalent document issued by the competent judicial or administrative body of the country in which the Contractor has a registered office or place of residence or residence, which toapplies to information or a document, to the extent specified in art. 24 sec. 1 point 14 and 21 of the Act issued not earlier than 6 months before the deadline for submission of tenders. If in a country where the person has a place of residence, whose document was to be related, such documents are not issued, it is replaced by a document (issued not earlier than 6 months before the deadline for submission of tenders)that person's statement made to a notary or to a judicial, administrative or professional body competent for the place of residence of that person. E. Documents of foreign entities - if the Contractor has its registered office or place of residence outside the territory of the Republic of Poland, instead of the documents referred to in point in point III.1.1)C.2) -4) of this announcement consists of a document or documents issued in the country in which the Contractor has a registered office or place of residence confirming that: a) he is not in arrears with taxes, fees, social security or health insurance contributions or that he has agreement with the competent authority regarding the repayment of such claims together with possible interest or fines, in particularhe obtained legally required exemption, postponement or spreading overdue payments or halting in full the decision of the competent authority issued no earlier than 3 months before the deadline for submitting bids, - b) its liquidation was not opened or bankruptcy not issued not earlier than 6 months before the deadline for submitting offers. F. If the Contractor isresidence or residence outside the territory of the Republic of Poland, instead of the documents referred to in point III.1.1) C.1) of this notice, he shall submit information from the relevant register or, in the absence of such register, another equivalent document issued by the competent judicial or administrative body of the country in which the Contractor is established or residesa person who is affected by information or a document is covered by a complaint, to the extent specified in art. 24 sec. 1 points 13, 14 and 21 of the Act issued not earlier than 6 months before the deadline for submission of tenders. If in the country in which the Contractor has its registered office or place of residence or place of residence has the person concerned, the documents referred to above are not issued, they are replaced byby an appendix (issued no later than 3 or 6 months before the deadline for submission of bids, see above) containing the Contractor's declaration, indicating the person or persons authorized to represent it, or a statement of the person to whom the document was to be submitted before a notary or before a judicial authority, administrative or self-regulatory body or gcompetent for the seat or place of residence of the Contractor or place of residence of this person. Continued in point III.1.3) of this notice. A written offer should be prepared in Polish and submitted before the deadline for the submission of offers only to the place indicated in the ToR as the place for submitting bids. Information on the method of communication between the Contracting Authority and the Contractthe forms, declarations or documents in which they should be submitted and the rules for their transfer are included in the ToR. 3. The SIWZ will be posted on the website: www.bip.kalisz.pl, www.bip.umkalisz.pl tab "Announcements" / "Public orders". 4. The period of being bound by the offer referred to in IV.2.6) of this announcement is 60 days. The bid validity period begins with the expiry of terthe minimum number of offers. Internet address (URL): http://www.kalisz.pl Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Numerically-controlled machines for metal was 22 Feb 2018. Bidding is closed.
This tender has been issued by MIASTO KALISZ in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42632000 - Numerically-controlled machines for metal, 42621100 - CNC lathe, 51500000 - Installation services of machinery and equipment, 51530000 - Installation services of machine tools, 42623000 - Milling machines, 42670000 - Parts and accessories of machine tools.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 19811183. The purchaser document reference is 017748-2018.
This tender falls under Technology and Equipment, Defence and Security in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.