Contract notice: Musical instruments and parts Tender - 22547539
Tender notice from Poland, published on 18 Apr 2018.
Executive Summary
The FILHARMONIA POMORSKA IM. IGNACEGO JANA PADEREWSKIEGO W BYDGOSZCZY has issued a Tender notice for the procurement of a Contract notice: Musical instruments and parts in the Poland. This Tender notice was published on 18 Apr 2018 and is scheduled to close on 28 May 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 22547539, while the tender notice number is 166512-2018 and Register on the platform.
Object of the contract Musical instruments and parts Description: Contract notice: Musical instruments and parts Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 37300000, 37311000, 37300000, 37311000, 37311100, 37313800, 37314000, 37313500 CPV Description: Musical instruments and parts. Keyboard instruments. Pianos. Violoncellos. Wind instruments. Harps. Purchase of musical instruments for the Pomeranian Philharmonic as part of the Project entitled Purchase of equipment and equipment for the Pomeranian Philharmonic Ignacy Jan Paderewski in Bydgoszcz Reference Number: 2-PN-2018 The subject of this order is the sale to the Ordering Party, delivery to the Blackbirdzt and the Contractor's risk to the Ordering Party's headquarters and bringing the following musical instrument sets (keyboards, strings and woodwinds) to the rooms indicated by the Customer: Main Site: The Pomeranian Philharmonic Ignacy Jan Paderewski in Bydgoszcz. The subject of part I of the order is the delivery of two master concert grand pianos with equipment. Beforethe part of the order is the sale to the Ordering Party, delivery at the cost and risk of the Contractor to the Employer's headquarters and bringing to the premises indicated by the Contracting Party, new instruments not included in the exhibition and their equipment as well as their inspection and tuning after setting the instruments in the target room. instrument and equipment: a) performance of the instrument: in traditional technology, b) dimensions of the instrument: length 270 290 cm, width 150 -160 cm, height 100 110 cm; c) weight of the instrument max. 500 kg; d) finish: black gloss, mirror effect, e) body made of one element (inner and outer layer), glued from several layers of seasoned solid maple; f) skeleton: entablature made of high qualitysolid spruce wood, g) girder made of 6 - 10 layers of solid wood of the highest quality; h) laminated bridge made of vertical layers with a horizontal course of grain with solid upper cover; i) resonance plate made of seasoned top quality high mountain spruce; j) ribs of the soundboard made of seasoned high quality high quality spruce top pinei; k) Duplex Scala or equivalent system; ) low string tension; m) treble clefs made of steel wire, n) bass strings - having a steel core wrapped with pure copper wire, o) cast iron grinding frame and covered with gold-colored paint layers; p) tuning pins made of hardened, stainless steel, nickel-plated heads, r) mechanism without plastic elements, s) hammers-made of wooden core and hard natural felt, t) silencer painted black high gloss, solid wood head, felt natural silencer, u) keyboard 88 keys made of solid wood, keys individually balanced with lead weights, w) cover - having profiled edge finish, minimum two open positions, lockable x) desktop with minimum six positions settings, y) pedals three pedals cast in brass, polished, middle pedal sostenuto, z) equipped as standard with double brass transport rollers with brakes, ) a cover with a soft lining with the manufacturer's logo and a stool (concert bench) piano manufacturer. PERIODS OF QUALITY AND WARRANTY PERIODS (required): 60 months from the date of the Awarding Entity's proclamationthe contractor during the warranty period, the Contractor will be obliged to provide instrument service authorized by the instrument manufacturer. As part of the quality guarantee and warranty, the Contractor will provide repair of defects or defects or replacement of the instrument: a) up to 16 business days from the moment of reporting the necessity of repair or replacement by the Ordering Party, if implementedI will be able to repair or exchange at the Employer's office; b) within 26 working days from the moment of requesting repair or replacement by the Ordering Party, if repair or replacement will not be possible at the Employer's premises - the date will be considered as retained if repaired or the said instrument will be delivered to the Ordering Party on the above-mentioned date. Ordercy does not make specific requirements to meet this condition. BASIS FOR EXCLUSION: 1. In the present proceedings for the award of a public contract, the Contracting Authority will exclude the Contractor against whom the conditions specified in art. 24 paragraph 1 points 12 23 and par. 5 points 1 of the Act, according to which of the proceedings for the award of the order, the Employer will exclude the Contractor in relation to whichtwarto liquidation, in the system approved by the court in the restructuring proceedings is provided for the satisfaction of the creditors by the liquidation of its assets or the court ordered the liquidation of its assets under the procedure of art. 332 par. 1 of the Act of 15 May 2015 - Restructuring Law (Journal of Laws of 2016, item 1574, 1579, 1948 and 2260) or whose bankruptcy was announced, except for the contractor, whothe bankruptcy arrangement was concluded by a legally valid court decision if the arrangement does not provide for creditors' satisfaction by liquidating the assets of the bankrupt, unless the court ordered the liquidation of its assets pursuant to art. 366 para. 1 of the Act of 28 February 2003 - Bankruptcy Law (Journal of Laws of 2016, item 2171, 2260 and 2261 and of 2017 item 791). 2. Contractor who is subject to exclusion on-based on art. 24 sec. 1 point 13 and 14 and 16-20 as well as lips. 5 points 1 of the Act, may provide evidence that the measures taken by him are sufficient to demonstrate its reliability, in particular to prove compensation for damage caused by an offense or fiscal offense, financial compensation for damage suffered or compensation, exhaustive explanation of the factsand to work with law enforcement agencies and take specific technical, organizational and personnel measures that are appropriate to prevent further offenses or fiscal offenses or improper conduct of the contractor. The regulation referred to in the first sentence shall not apply if the contractor, being a collective entity, has been convicted by a valid court judgment-a ban on applying for a contract and the period of validity of the prohibition specified in that judgment has not expired. The Contractor is not subject to exclusion, if the ordering party, considering the weight and special circumstances of the contractor's deed, deems sufficient evidence indicated above. The ordering party may exclude the contractor at any stage of the procurement procedure. The ordering party does not make any reservationsThe tenderers who will submit bids for parts: IV, V, VII - will provide with the offer one instrument from each model to be evaluated by the tender committee as part of the bid evaluation criteria. Tenderers who submit offers in part: I, II, III, VIII and IX - from the comments on the specificity of the instruments to be assessed, they will provide (at their own expense) to the members of the tender committee-(4 persons) possibility of evaluation by the tender commission of the model offered in the place indicated by the Contractor within the time specified by the Awarding Entity not shorter than 3 days from the notification by the Employer. Each Contractor must attach to the offer a statement, valid as at the day of submission of offers by the Ordering Party in Section V, section 1 and VI SIWZ, in fof a single document drawn up in accordance with the specimen of the standard form set out in the European Commission's implementing regulation issued on the basis of art. 59 par. 2 of Directive 2014/24 / EU. Other documents required for the offer are specified in the ToR. Purchaser prior to awarding the contract, pursuant to art. 26 par. 1 of the Act will call the Contractor, whose offer was rated the highest, to-submission within the prescribed period, not shorter than 10 days, valid as of the date of submitting the following statements or documents confirming the circumstances referred to in art. 25 ust. 1 of the Act. In order to confirm the lack of grounds for excluding the Contractor from the proceedings, the Ordering Party will request: a) information from the National Criminal Register in the scope specified in art. 24 sec. 1 points 13, 14 and 21 of the Act-issued not earlier than 6 months before the deadline for submitting offers; b) certificate of the competent head of the tax office confirming that the contractor is not in arrears with tax payment, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the contractor has concluded agreement with the competent tax authority in the matter ofat these receivables together with any interest or fines, in particular obtained legally required exemption, deferral or installment payment of overdue payments or suspension in full of the decision of the competent authority; c) certificate of the relevant organizational unit of the Social Insurance Institution or Agricultural Social Insurance Fund; another document pconfirming that the contractor is not in arrears with paying social security or health insurance contributions, issued no earlier than 3 months before the deadline for submission of bids or other document confirming that the contractor has concluded an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular, he obtained the law provided for by law(d) the contractor's statement that he has not been the subject of a final court judgment or final administrative decision on late payment of taxes, fees or social security or health insurance premiums; - in the case of issuing such a sentence or decision-documen(e) a statement by the economic operator about the absence of a measure against him as a precautionary measure prohibiting him from seeking public contracts; (f) an extract from the relevant register or from central records and information about business activity, -if separate regulations require an entry in the register or records, in order to confirm the absence of grounds for exclusion under Art. 24 sec. 5 point 1 of the Act - Contractor, within 3 days from the date of posting on the website information referred to in art. 86 par. 5, provides the orderer with a declaration of belonging or non-affiliation to the same capital group referred to in-Art. 24 sec. 1 point 23 PzP. Cd. inf. in SIWZ. Internet address (URL): http://www.filharmonia.bydgoszcz.pl/ Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Musical instruments and parts was 28 May 2018. Bidding is closed.
This tender has been issued by FILHARMONIA POMORSKA IM. IGNACEGO JANA PADEREWSKIEGO W BYDGOSZCZY in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 37300000 - Musical instruments and parts, 37311000 - Keyboard instruments, 37311100 - Pianos, 37313800 - Violoncellos, 37314000 - Wind instruments, 37313500 - Harps.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 22547539. The purchaser document reference is 166512-2018.