Tender notice from Hungary, published on 19 Nov 2019.
Executive Summary
The PARAFIX HUNGÁRIA KFT. has issued a Tender notice for the procurement of a Contract notice: Miscellaneous special-purpose machinery in the Hungary. This Tender notice was published on 19 Nov 2019 and is scheduled to close on 17 Dec 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 38103561, while the tender notice number is 541636-2019 and Register on the platform.
Object of the contract Miscellaneous special-purpose machinery Description: Contract notice: Miscellaneous special-purpose machinery Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42990000, 42990000, 42990000, 42961200 CPV Description: Various special purpose machinery. Scada or equivalent system. Parafix H. Kft. Manufacturer development Reference Number: EKR000293512019 Parafix Hungaria Kft. Expansion of production capacity to develop 4 industrial machines and IT (intelligent production system development) ) supply of hardware and software Main Site: 2451 Ercsi, 1370/27 hrNo. Contractor: Adasveteli Contractor. The task of the supplier is to supply the following new machines: 1.) With an effective working area of 360 x 360 mm, precision machining of / - 0.1 mm, automatic punching machines, four-sided adhesive tapes, polymeric foils, foams and carriers for laminates, molds. A stancolo gep made of welded, screwed frame and elements mounted on the frame. The centerpiece of the machine is the cut-out head that cuts through the die. Minimum cutout power required for the die cutting machine: 200 kN (20 t) On the inlet and outlet sides of the machine, 8-8 axles are mounted with a bracket. Rolls of up to 20 kg on the shafts are mounted on a keruel. The shafts are the raw material roes, eI am able to lower and tighten the prints on his shoot. Further work on the shafts is the winding of scraps, trimmings and rolls of dormer rooms. The shafts are driven by a motor, can be changed from a control program, and the torque is controlled. The shafts are held in position by 3 "core coiled material with pneumatic adjustment. Laminate units are the basic materialconduction, bubble-free laminate backing and raw material transfer. On the machine inlet and outlet sides for 3 to 3 keruel sockets. The laminate unit is made of 2 rubberised rollers all of which are allithable, driven by a float or servomotor. The cutter head can be cut to a maximum of 0.01 mm in cut lengths. The head is 23.8 mm by 12.7 mmHeight adjustable tools. Required punching speed minimum 110 Leu / min with 0-20 mm brush stroke 2.) 1 piece 400 V mains voltage, min. With an effective working area of 560 x 560 mm, a precision gluing of / - 0.1 mm, automatic stamping machines, four-sided adhesive tapes, polymeric foils, foams and carriers for laminates, molds. THEstancolo machine made of welded, bolted frame and elements mounted on the frame. The centerpiece of the machine is the cut-out head that cuts through the die. Expected cutting power of the die cutting machine: min.300 kN (30 t). Rolls of up to 20 kg on the shafts are mounted on a keruel. The shafts are the raw material roerroneous, lowering and tensioning on pre-set prints. Further work on the shafts is the winding of scraps, trimmings and rolls of dormer rooms. The shafts are driven by a motor, can be changed from a control program, and the torque is controlled. The shafts are held in position by 3 "core coiled material with pneumatic rivet. The raw materials undergo conduction, bubble-free laminate blush and feedstock transfer. On the machine inlet and outlet sides for 2 to 2 keruel sockets. The laminate unit is made up of 2 rubberised rollers, all of which are removable, driven by a sweeper or servomotor. The head of the horn is 23, 8 mm and 12.7 mm high tools are adjustable. Expected punching speed with a minimum of 100 Leu / min on a 0-20 mm stroke. They are all equipped with safety features. The machine control touch screen has a cross communicating geppel.The settings are saved by the machine and can be called up at a later date. The gep will be connected to the Industry4.0 / MES network via an Ethernet connection via a standard protocol. The machines have further elements, please refer to the technical description for details.lifting procedure Kizaro Reasons: In the process, it may not be suggestive, sub-contracted, or certified as an economic Performer against whom Kbt. Any of the grounds for exclusion provided for in Article 62 (1) to (2) shall apply. The time taken to act shall exclude from the procedure any economic operator to whom any of the applicable exclusion criteria apply.The Kbt. Pursuant to Article 74 (1) (b), the tenderer shall exclude from the procedure any tenderer, subcontractor or entity that has accepted the certificate, which has been excluded on the basis of the procedure. Section 67 (1) of the Kbt. His suggestion was made in the course of this co-procuring procurationupon receipt - on 321/2015. (X.30.) On the basis of Section 1 para. As stated in this chapter, you must prove in advance that you do not belong to the Kbt by submitting the Single European Co-Procurement Document (EEKD). Article 62 (1) - (2) is subject to the power of exclusion. In the Single European Document, the economic operator (adviser, where applicable)(s) declaring that the grounds for exclusion are not overridden, it shall exercise a privilege in the provision of garden information. The statement must include a statement that the Kbt. Article 69 (4) of the Act on the certification of the certificate to be submitted, which body is entitled, and the Kbt. Database according to - 69 (11)provide you with relevant information and, if applicable, a statement. The Kbt. The exclusion reasons listed in Article 62 (1) - (2) do not prescribe to the offeror the provisions of Articles 2 to 8 of the Government Decree. -, 10. - es 12-16. -. In the case of a Koezoe suggestion, a blank form must be submitted for each Koezoe Advisor. If advised by the prospectgi want to meet the requirements of other organizations or individuals, Kbt. Article 67 (3) and Article 321/2015. (X.30.) On the basis of Article 15 (1) of the Government Decree 321/2015. (X.30.) Korm. That sleepin respect of entities which do not take certificates of fitness for service, Kbt. 67. (4), the Provider is required to submit a statement of the reasons for the exclusion for reasons of maladministration. Timeline for Kbt. According to - 69 (4) to (7), jar is done miserably. The timeline below the Kbt. Pursuant to - 69 (4) - (7), the submission of certificates relating to the grounds of exclusion to the invited adviser is required by the Kbt. Section 62 (1) - (2) does not supersede the provisions of Decree 321/2015. Government Decree Articles 8, 10 and 12-16. -. Commitment draws attention to Kbt. - 69 (5) to (7) and (9) to (11), (13) to (14), and to - 424/2017. (XII. 19.) Government Decree (XII. 19.) on the provisions of Article 12 (2). The power of time draws the attention of experts to the Kbt. Possibility of clearing in - 64away. No. 321/2015. (X. 30.) of the Government Decree on the grounds of exclusion and eligibility, certificates issued prior to the commencement of the procurement may be retrieved (as long as the contents of the certificate and the data contained therein). Bargaining power informs bidders that all the specificszasaban iranadoado. For the Proponent (koezoes Proponent) of the Kbt. - 67 (1) and - 321/2015. Government Decree, in accordance with - 1 (1) and Chapter II (- 5) of the Government Decree, must certify in advance by filing with the EEKD that it complies with the eligibility test by accepting the simple declaration by the economic operators of the suitand its justification, ie the Offeror will be satisfied in this respect with the provisions of Section IV of the EEKD. (3) of Government Decree 321/2015. (X.30.) on the basis of a koezoe suggestion, each koezoe adviser shall submit a kueloen form. for people with disabilities, relying on the capacity of another organization or individualis to comply with the Kbt. Pursuant to Article 67 (3), the EEKD shall also be submitted at the time of the offer in respect of the organization providing the capacity pursuant to Article 321/2015. (X.30.) On. (2) of the Decree of the President of the Republic of Hungary, and, when requiring certificates to be submitted to that organization or person, except in the case of suitable candidates, al must prove the same in the same way. - 69 (4) to (7), the Calling of Certificates Called by the Proponents is to prove that they meet the following requirements: P / 1. No. 321/2015. (X. 30.) Korm. c.) Based on the Offeror attaches to the business events closed 3 (three) nautical turns prior to the tender callzan declares, with respect to the general sales tax, the purchase price of the co-purchaser, and the 3-year (s) co-purchaser of the co-purchaser take action if this information is available 1 to 3: supply of manufacturing machinery 4 reserve: supply of productive information system (hardware, software) If the Provider has completed or commenced at such time activity that you can make a statement for the 3 (three) years required, then thesemust be included in the declaration and the intake of co-purchases of supplies for these years must meet the requirements specified in the eligibility requirement (minimum intake). does not have the required proof (statement) because it operates in a legal form which, in respect ofYou may provide any other statement or document deemed appropriate by the competent authority in lieu of any applicable certification and verification modality required by this clause. This adjunct reviewer is seeking to prove that he is working in a legal form that provides for revenueby submitting a declaration, it is not possible to seek information on the suitably validated and validated modality required by these points, instead of the appropriate co-operative and verification modalities required by these points. 65. - (6) - (9) subsection. ando use. 1st The Timeline (hereinafter referred to as "AK") is the subject of Co-Procurement Procedure 424/2017. (XII.19.) Government Decree (ECR)established and operated under the Electronic Co-Purchasing System (ECS) operated by the Minister. In view of this, the proposals (hereinafter referred to as "AJ") should be submitted in the ECT. AK provides the file format to be used for submitting suggestions: a readable and non-editable pdf format, including 4 files in .xls format. AK is updraws attention to the fact that the use of the ECR, such as the preparation and submission of an offer, requires registration from an eligible person [ECR]. - 6 (1)]. 3. Bidders (AT) should follow the delivery of the offer on a regular basis in the ECR. 11-12. - 4. The suitability of ATs for suitability requirements and the reasons for exclusion are not outlined abovecertificate of sanitation in the ECR. Article 12 (2) may also apply. 5. The offer must be accompanied by a reading sheet (Kbt. 66 (5)), ECR Art. Article 11 (1) is based on the form provided in the ECT with a secondary counterpart. 6.AJ must include the AT statement in accordance with section 66 (2) and (6) Kbt (also in the case of a negative statement). For bidders, the ECT. Article 20 (4) is based on thisloen do not have to comment on Kbt. 66 (4). 7.Other AT can also make offers koezoes AT (koezoes AT). 8. Eligibility criteria for ATs for qualified AT notes (P. 30 (4)) stricter (P / 1, M / 1.) Kbt.75.- (2) (e) -t. 10.Kbt.73 (5): AK in the Co-Procurement Documents (Furthern: KD) manages the names of the organizations from which AT may receive information on co-workers according to - 73 (4) Kbt, which must be complied with. 11. The best selling value in every case is gold, Kbt. Section 76 (2) para. (c). Score also es: 0-10 for all grades. Selling method: 1st file: 1.ert. Aspect Criterion (Single - armed Net Ar): Reverse Gold Certification, 2. es 3rd. aspect: gold plating, the most favorable level, and the most unfavorable pendant with coesoet supplies, min. a non-power quote is unsteady. Item 2: Criterion 1 (one-armed net ar): Reverse Gold Certification, Criterion 2: Gold Certification, with the most favorable level or least favorable coezoet valuation, max. evaluateoverdue suggestions are shaky. Res. 3: 1st. Aspect (single-armed net ar): Reverse Gold Certification, 2 rd. aspect: gold plating, the most favorable level, and the most unfavorable pendant with coesoet supplies, min. quotes that fail to deliver are unrelenting. Item 4: Criterion 1 (net worth of single-nail): Reverse Gold Certification, 2nd Cert. aspect: gold plating, most favorablefloor level or the most unfavorable pre-owned koezoetti supply, min. quotes that fail to deliver are unrelenting. See the documentation for details. 12.AK excludes the creation of project companies for ATs and co-ops. 13.Calculating currencies denominated in foreign currencies For the purpose of converting currencies into forint, this AF dispatch shall use daily foreign exchange rates set by the MNB.applied, with pencil suitability on the merchant day, with reference to a vigorous test course at the time of completion. In the case of non-HUF denominated certificates, the document containing the identification shall be attached to the letter of the requested document. (3)should report AK immediately. 15. In relation to Hianypotlas iranadoado is described in Kbt.71, Kbt.71 (5) - (6). AK a Kbt. (B) of Article 71 (6). Continued: AF VI.4.3. Internet address (URL): http://www.parafix.com
The bid deadline for Contract notice: Miscellaneous special-purpose machinery was 17 Dec 2019. Bidding is closed.
This tender has been issued by PARAFIX HUNGÁRIA KFT. in Hungary.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42990000 - Miscellaneous special-purpose machinery, 42961200 - Scada or equivalent system.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 38103561. The purchaser document reference is 541636-2019.