Contract notice: Military uniforms Tender in Switzerland - 42820224
Tender notice from Switzerland, published on 13 May 2020.
Executive Summary
The ARMASUISSE PURCHASE AND COOPERATIONS CC WTO has issued a Tender notice for the procurement of a Contract notice: Military uniforms in the Switzerland. This Tender notice was published on 13 May 2020 and is scheduled to close on 14 Aug 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42820224, while the tender notice number is 223276-2020 and Register on the platform.
Object of the contract Military uniforms Description: Contract notice: Military uniforms Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: Agreement between the European Union and the Swiss Confederation Award criteria: The most economic tender CPV code: 35811300, 35811300, 35811300 CPV Description: Military uniforms. Dress Uniforms Armasuisse procures in several tranches basic uniforms for ladies and gentlemen consisting of veston, trousers (ladies and gentlemen), blazer and skirt for the military sectors of defence, civil protection and sports (DDPS). With the present call for tenders armasuisse wants to conclude the general conditions for the production. Veston and Hose 95/06 (Herren). When the tender is submitted, the suitability criteria and required supporting evidence listed below must be confirmed, appended and substantiated in full without any reservations or modifications; otherwise the bid will not be considered. E1: Extracts from the debt collection register and excerpts from the commercial register Extracts from the debt collection register and excerpts from the commercial register or the equivalent recognised documentation from other countries which provide evidence that the tenderer does not have any tax debts or has not paid the full amount for social security contributions (not older than 3 months — the effective entry date is decisive). E2: (a) Compliance with procedural principles The tenderer confirms that it and the third parties it has called on (subcontractors and subsuppliers) will comply with the procedural principles in accordance with the self-declaration sheet (enclosure 1.1.1) of the Swiss federal government`s purchasing conference (BKB). (b) Additional evidence of compliance with the regulations on equal pay for men and women Tenderers with more than 50 employees and their first-level subcontractors that have more than 50 employees must also provide evidence for the self-declaration sheet on how their salary practice has been reviewed and how the tolerance threshold of 5 % applied in purchasing functions is adhered to. E3: Supplier self-declaration E4: Audit The tenderer is willing, if requested by the contracting authority, for itself and its partner firms in the production chain as shown in the suppler self-declaration to be audited by an independent audit institution appointed by the contracting authority. The audit is intended to ensure compliance in particular with the ILO fundamental principles and local work and occupational safety conditions as stated in the supplier self-declaration. The tenderer further confirms and acknowledges that failure to comply with one or more of the ILO fundamental principles or one or more of the local work and occupational safety conditions will result in the offer being excluded from the tender. E5: Compliance with the production chain Confirmation of the tenderer that it will produce the items requested as stipulated in the specification using the production chain stated in the supplier self-declaration (enclosure 1.1). E6: Environmental protection Compliance with the national legislation for all areas of environmental protection (air, water, etc.) in all of the process steps taken by the tenderer and the main subsuppliers in accordance with section 1.3 of the supplier self-declaration (enclosure 1.1). E7: Compliance with laws regarding the payment of minimum wages The tenderer confirms that it and its main subsuppliers shall comply with the laws regarding the payment of minimum wages applicable in the country in which their production facilities are located in accordance with section 1.3 of the supplier self-declaration (enclosure 1.1). E8: Overall responsibility The tenderer confirms that it will assume overall responsibility, i.e. the tenderer is the sole contractual partner of the contracting authority. Any parties involved must be listed together with their assigned roles and functions in enclosure 1.1. E9: SPOC during the tender procedure Evidence of a single point of contact (SPOC) during the tender procedure. E10: SPOC after the contract has been awarded Evidence of a single point of contact (SPOC) for all business processes, such as orders, payments and services. E11: Availability for commercial and technical discussions Confirmation of the tenderer that the relevant staff (both technical and commercial) will be available within five business days of invitation to attend the offices of armasuisse in Bern for discussions (in German or English). This also applies for discussing orders, manufacturing samples, complaints and rejects. E12: Draft framework conditions The tenderer confirms unconditional acceptance of the draft framework conditions in accordance with enclosure 5.0. E13: Acceptance of the terms and conditions Confirmation that the tenderer accepts the general terms and conditions of the Swiss Federal Government for goods (in the version dated 11 September 2016), which are available at: http://www.ar.admin.ch/internet/armasuisse/de/home/themen/beschaffung/lieferant/agb.html E14: Compliance with the technical specifications The tenderer confirms that it has the capabilities to deliver the items requested in accordance with the technical specifications set out in enclosure 2.0 to this tender. E15: Occupational health and safety The tenderer confirms that that companies listed in the supplier self-declaration (Enclosure 1.1) are certified to OHSAS 18001 or meet the points set down in enclosure 1.3 `Occupational health and safety check list`. E16: Provision of samples with the bid The tenderer confirms that it will provide the full range of samples requested with the bid in accordance with section 2.7 of the specification so that the quality can be checked. E17: References for lot 1 (jacket/trousers 95/06) For the manufacture and supply of male uniforms the tenderer must provide at least two references, which must relate to the supply of at least 3 000 uniforms made after 2017. There must be two separate references (e.g. not both from armasuisse). E18: References for lot 2 (blazer/skirt/FDA trousers) For the manufacture and supply of female uniforms the tenderer must provide at least two references, which must relate to the supply of at least 500 uniforms made after 2017. There must be two separate references (e.g. not both from armasuisse). E19: Delivery deadlines for lot 1 (jacket/trousers 95/06) Confirmation of the tenderer that it is willing and able depending on the lot to produce 22 000 items within a maximum of 28 weeks from order and deliver these from the place of manufacture to the receiving location in Switzerland. The tenderer confirms that it has the capacity to perform the bid submitted in full. In other words, the tenderer must be able to complete all orders. Should the tenderer not comply with these deadlines, the client reserves the right to revoke the issuing of the contract (Art. 11 BoeB) and a contractual penalty will be enforced. E20: Delivery deadlines for lot 2 (blazer/skirt/FDA trousers) Confirmation of the tenderer that it is willing and able depending on the lot to produce 1 500 items within a maximum of 28 weeks from order and deliver these from the place of manufacture to the receiving location in Switzerland. The tenderer confirms that it has the capacity to perform the bid submitted in full. In other words, the tenderer must be able to complete all orders. Should the tenderer not comply with these deadlines, the client reserves the right to revoke the issuing of the contract (Art. 11 BoeB) and a contractual penalty will be enforced. E21: Partial deliveries Confirmation of the tenderer that it is willing and able to produce and supply partial deliveries of roughly 20 items within three weeks of order. E22: Fabric for tailor-made uniforms lot 1 (jacket/trousers 95/06) Confirmation of the tenderer that its it willing and able to supply on request from armasuisse an additional annual quantity of roughly 400 linear metres of outer fabric mixed polyester/wool crosswise elastic dark grey (A.71.5311) and mixed polyester/wool crosswise elastic light grey (A.71.5312). E23: Machinery for lot 1 (jacket/trousers 95/06) Confirmation of the tenderer that the manufacturer has the following machines: • front finishing press for male garments with vertical closing (two-part type/two machines), • pocket sewing machine (piping), • continuous fusing machine. E24 Machinery for lot 2 (blazer/skirt/FDA trousers) Confirmation of the tenderer that the manufacturer has the following machines: • front finishing press for female garments with vertical closing (two-part type/two machines), • pocket sewing machine (piping), • continuous fusing machine. Partial offers are permitted. Conditions for countries not party to the WTO agreement: None. Terms of business: general terms and conditions for the procurement of goods (09.2016): https://www.beschaffung.admin.ch/bpl/de/home/auftraege-bund/agb.html. Negotiations: Remain reserved. Basic procedural principles: the client only awards public commissions for services in Switzerland to tenderers who comply with job security regulations and the conditions of work for employees and provide equal payment for men and women. Deadline/remarks: place of submission: cf. 1.2. The following must be observed in order to meet the submission deadline: (a) For submission to armasuisse (administration centre Guisanplatz 1). The following points must be observed when handing in the goods at `Verwaltungszentrum Guisanplatz 1`, Guisanplatz 1, 3003 Bern, at the attention of CC WTO armasuisse: • The provider must register at `Areal Lodge Guisanplatz 1` stating the project title (cf. section 1.2). It will be forwarded by the latter to the `Ramp Management Guisanplatz 1`. • The submission must be made by 15.00 at the latest on the submission date mentioned under item 1.4 against issuance of a receipt confirmation of the ramp management. • Opening hours of the ramp management: Monday-Friday 7.00-12.00/13.00-15.00 (outside these hours no offer can be made). (b) For submission by post: the postmark or barcode receipt of the shipping service provider shall be authoritative (company frankings shall not be deemed postmarks). (c) For delivery to a diplomatic or consular representation of Switzerland: the acknowledgement of receipt from the relevant representative shall be decisive. The acknowledgement of receipt must be sent to the email address specified in section 1.2 by the latest by the deadline for submission of the offer, stating the project in question. Remarks: (Desired deadline for questions in written form) if queries arise while preparing the tender, they must be submitted by means of an anonymous forum entry to the question forum at www.simap.ch A separate forum entry must be created for each question (one question per entry). The questions will be answered in the simap.ch question forum. All questions and answers can be viewed by all bidders who have received the tender documentation. It is the responsibility of bidders to keep themselves informed of any entries in the question forum. National reference publication: Simap of 12 May 2020, doc. 1134133 Desired deadline for questions in written form: 7 August 2020 Documents of the invitation to tender are available from: 12 May 2020 Conditions for obtaining the tendering documentation: the documents can be downloaded from the electronic platform www.simap.ch category `Public Procurement, Federal Invitation to tender`. To do this, you first have to register in the above-mentioned project and can then download, using login and password, the desired documents sent to you by email. A question forum is at your disposal. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Military uniforms was 14 Aug 2020. Bidding is closed.
This tender has been issued by ARMASUISSE PURCHASE AND COOPERATIONS CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 35811300 - Military uniforms.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 42820224. The purchaser document reference is 223276-2020.