Contract notice: Metal-working machining centre Tender - 34436467
Tender notice from Poland, published on 05 Jul 2019.
Exeutive Summary
The POLITECHNIKA OPOLSKA has issued a Tender notice for the procurement of a Contract notice: Metal-working machining centre in the Poland. This Tender notice was published on 05 Jul 2019 and is scheduled to close on 08 Aug 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 34436467, while the tender notice number is 312461-2019 and Register on the platform.
Object of the contract Metal-working machining centre Description: Contract notice: Metal-working machining centre Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42638000, 34144440, 42300000, 42123400, 42999100, 42638000, 34144440, 42300000, 42123400, 42999100 CPV Description: Metal-working machining center Gritter vehicles. Air compressors. Non-domestic vacuum cleaners. Delivery, installation and commissioning of laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design Faculty of Mechanical Engineering, Opole University of Technology. Reference Number: ZP / D / 37/2019 1. Subject of the contractenia is: Supply, installation and commissioning of laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design at the Faculty of Mechanical Engineering at the Opole University of Technology. A detailed description of the subject of the order is attached as Appendix 3 to SIWZ. Main Site: Faculty of Mechanical Engineering of the Opole University of Technology, ul. Stanisława Mikołajczaka 5, 45 -2741 Opole, POLAND. Subject of the orderIt is to supply, install and commission laboratory equipment for advanced 3D printing methods for the Department of Mechanics and Fundamentals of Machine Design at the Faculty of Mechanical Engineering at the Opole University of Technology. A detailed description of the subject of the order is provided in Annex 3 to the ToR. - The contractor must prove that he is insured against liability to confirm his economic situationin the scope of conducted activities related to the subject of the order (eg liability policy) for a guarantee sum not less than PLN 1, 000, 000.00 (one million zlotys); If the Contractor presents in the offer the sum insured in a currency other than PLN, the conversion will be made according to the average NBP exchange rate on the day the proceedings were initiated (ie the date of publication of the contract notice in the Official Journal) In the case of a joint bid, the above condition will be met if any of the contractors submitting a joint offer will have a document confirming that the contractor is insured against civil liability for the guarantee sum required by the ordering party. The Contracting Authority allows summing up the value of policies held by contractorsa common offer in order to meet the condition of the economic situation. The Purchaser will assess the fulfillment of the above condition. Based on the statement referred to in Chapter VI, para. 1 item 1 of the ToR, submitted in the form of a Single European Order Document and a document confirming (eg an OC policy) that the Contractor is insured against civil liability, as required by Zwho would like to pay a guarantee sum, referred to in Chapter VI, para. 4 point 1 SIWZ (applies to the Contractor whose offer will be considered the most advantageous); - The Contractor, in order to confirm the financial situation, must demonstrate possession of financial resources or creditworthiness in the amount not less than PLN 1, 000, 000.00 (one million zlotys) If The Contractor will present in the offer the sum of held avgor creditworthiness in a currency other than PLN, the conversion will be made at the average NBP rate on the day the proceedings were initiated (ie the date of publication of the contract notice in the Official Journal of the European Union). submitting a joint offer will have a document to confirmthat the contractor has financial resources or creditworthiness in the amount not less than PLN 1, 000, 000.00 (one million zlotys). The Employer allows the aggregation of the value of financial resources held or creditworthiness by the contractors who submit a joint offer in order to meet the condition of the financial situation. The Purchaser will assess the fulfillment of the above condition inu for the statement referred to in Chapter VI, para. 1 point 1 SIWZ, submitted in the form of a Single European Order Document and a confirmation document (eg information from a bank or cooperative savings and credit union, confirming the amount of financial resources held or creditworthiness of the Contractor in the period not earlier than one month before the offer submission deadline expires)t, in the amount of minimum PLN 1, 000, 000) referred to in Chapter VI, para. 4 point 2 SIWZ (applies to the Contractor, whose offer will be considered the most advantageous); Description of the way of preparing offers. 1. Basic requirements: 1.1. each Contractor may submit only one offer, 1.2. the offer should be prepared strictly according to the requirements set out in this ToR, 2. The Contractor submits the offer viaForm to submit, change, withdraw the offer or application available on ePUAP and also made available on the miniPortal. The public key necessary to encode the offer by the Contractor is available to the Contractors on the miniPortal. 3. The offer should be prepared in Polish, while maintaining the electronic form in the data format -.pdf; .doc; .xls; .csv and signed with a qualified signature• The method of submitting the offer, including the encryption of the offer, is described in the Regulations for the use of miniPortal. The offer should be submitted in the original. 4. All information constituting a company secret within the meaning of the Act of 16.4.1993 on Combating Unfair Competition, which the Contractor reserves as a company secret, should be submitted in a separate file along withsimultaneous selection of the command "Annex constituting a trade secret" and then with the files constituting the open part compressed into one archive file (ZIP). 5 The offer should be accompanied by the Single European Order Document in electronic form with a qualified electronic signature, and then with the files constituting the offer to compress to onego the archive file (ZIP). 6. The Contractor may, before the deadline for submission of tenders, change or withdraw the offer via the Form to submit, change, withdraw the offer or application available on ePUAP and also made available on the miniPortal. The method of changing and withdrawing the offer has been described in the User Manual available on the miniPortal. 7. Contractor after the deadline for submission of offersit can not effectively change or withdraw the offer. 8. Form of the offer: 8.1. the offer will be prepared in Polish language, 8.2. the offer and the statement referred to in art. 25a uPzp, including a uniform document (EAT), shall be made, under pain of nullity, in electronic form and shall be provided with a qualified electronic signature; 9. The offer must consist of: 9.1. Document Outletin and statements referred to in Chapter VI, para. point 1 of the ToR, 9.2. Contractor's tender form Annex No. 1 to the ToR, 9.3. to demonstrate the reservation of information constituting a trade secret in accordance with point 10 below (if applicable), 9.4. power of attorney (if applicable) - Proxy must be submitted in electronic form signed with an electronic qualified signature. Natomiast, if the Contractor will only have a power of attorney in writing, he submits them in the form of an electronic confirmation of the copy, extract or copy with the document presented, which the notary provides with a qualified electronic signature (Article 97 - 2 of the Notary Public). Then an offer in electronic form should be accompanied by a copy of the power of attorney prepared by the notaryin electronic form. Internet address (URL): https://www.po.edu.pl/
The bid deadline for Contract notice: Metal-working machining centre was 08 Aug 2019. Bidding is closed.
This tender has been issued by POLITECHNIKA OPOLSKA in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42638000 - Metal-working machining centre, 34144440 - Gritter vehicles, 42300000 - Industrial or laboratory furnaces, incinerators and ovens, 42123400 - Air compressors, 42999100 - Non-domestic vacuum cleaners.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 34436467. The purchaser document reference is 312461-2019.
This tender falls under Technology and Equipment, Materials and Products in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.