Contract notice: Machining centre Tender in Bulgaria - 41309865
Tender notice from Bulgaria, published on 06 Mar 2020.
Executive Summary
The ТЕХНИЧЕСКИ УНИВЕРСИТЕТ — СОФИЯ has issued a Tender notice for the procurement of a Contract notice: Machining centre in the Bulgaria. This Tender notice was published on 06 Mar 2020 and is scheduled to close on 23 Apr 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 41309865, while the tender notice number is 110553-2020 and Register on the platform.
Object of the contract Machining centre Description: Contract notice: Machining centre Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: Lowest price CPV code: 42612000, 42612000, 42612000 CPV Description: Machining center. Delivery of semi-automatic microchip wiring station for the needs of Technical University - Sofia ... Continued in section VI.3) "Additional information". The order includes delivery, installation, commissioning (as well as training of employees of the contracting authority) of 1 semi-automatic microchip wiring station.and microchip (microcrystalline) wiring is designed to be bonded to thin wires of located / fixed microcrystals (semiconductor integrated circuits, MEMS chips, laser diodes, ultra-high frequency, etc.) on substrates or housings (flexible or rigid, ceramic-based, solid) polymers or composites, metals) to produce modules. The connection is between pinssites of microchips and pads. The delivered equipment must be new, unused, in the original factory packaging. Cl. Ohridski "№ 8 Includes delivery of 1 semi-automatic microchip wiring station. The configuration of semi-automatic microchip wiring stationThin-wire bonding of fixed / fixed microcrystals (semiconductor integrated circuits, MEMS chips, laser diodes, ultra-high frequency, etc.) onto substrates or housings (flexible or solid based on ceramics, glasses, polymers or composites, metals) for the purpose of producing modules. The connection is between the microchip contact pads and the pads. The modules can contain nas many integrated and connected elements with different application. Wiring can be done by ultrasonic welding, thermocompression or both. The connection itself can be under atmospheric conditions or in a gas environment. Most commonly used are gold or aluminum conductors, but may also include copper, platinum, etc. The semi-automatic station must be able to set a parameterwiring (temperature, pressure, ultrasound power, pressure rate, etc.) through the control of a personal computer. The positioning of the leads of the connected wires is carried out by the operator through an optical system allowing high accuracy of positioning. The station is intended for mounting experimental samples and for the study of materials and methods of wiring.The detailed technical parameters are specified in the technical specification, part of the documentation for participation. Warranty period - minimum 12 months, starting from the date of signing of the handover certificate certifying the completion of the activities for delivery, installation, commissioning and training. Within the warranty period, the contractor shall, within 30 calendar days, counted as Fr.the date of the bilaterally signed ascertainment protocol, eliminates by its own forces and means all malfunctions, mismatches, damages, defects and / or deviations of the delivered device, respectively supplies spare parts and / or components, replaces defective parts and / or components with new ones. If these activities cannot be completed within 30 calendar days, the contractor shall have up to 15 kaledays provides the contracting entity with a turnaround device of the same or similar class until the defect / damage is remedied, and the warranty period of the device, in the process of repair / repair, is extended by the period during which the repair / repair has lasted. The warranty for repairs / attachments is 6 months from the date of bilaterally signed protocol certifying the completiontheir repair / attachments. The contracting authority`s complaint message may be sent by fax, e-mail or regular mail. The Contractor is obliged to send his representative to the site for finding and identifying the damage / non-compliance within 5 calendar days after receiving the Client`s claim message. A visit report shall be drawn up in 2uniform copy describing the type of damage / malfunction / mismatch / defect and / or deviation of the delivered device. Do not place Do not place Continued from Section II.1) under project BG05M2OP001-1.001-0008 "National Center for Mechatronics and Clean Technologies", funded through the Operational Program "Science and Education for Intelligent Growth" 2014-2020 The participants will be removed if any of the grounds under Art. 54, para. 1 of the Public Procurement Act and Art. 107 of the Public Procurement Act (Art. 55 of the Public Procurement Act does not apply), except in the cases explicitly stated in the Public Procurement Act. "Offered price parameters" items related to the offered price (orparts thereof), - a tenderer who has submitted a technical proposal that does not meet the requirements of the technical specification and the conditions of the contracting authority, - a tenderer who has bid higher than the maximum estimated value of the contract, - participant for whom there are obstacles to participation in public procurement, provided for in Art. 3, item 8 of ZIFODRUPDRKTLTDS, unless they have applied exceptions under Art. 4 of it, - a participant for whom the prohibitions under Art. 69, para. 1 and para. 2 of the CITAA. The circumstances under Art. 54, para. 1, items 1, 2 and 7 of the Public Procurement Act refer to the persons referred to in Art. 54, para. 2 of the PPA, in connection with Art. 40 of the PDAB. According to Art. 46 of the PPPOP the participants are obliged to notify the client in writing within 3 days after the occurrence of circumstances.here under Art. 54, para. 1, Art. 101, para. 11 of the PPL. According to Art. 67, para. 1 of the PPA, when submitting a tender, the tenderer declares the lack of grounds for removal by submitting an EDES. It shall provide the relevant information required by the contracting authority and indicate the national databases containing the declared circumstances or the competent authorities which, under the legislationThe Member State of establishment is obliged to provide information. The contracting authority may require, at any time after the opening of tenders, the submission of all or part of the documents proving the information specified in the EDES, where this is necessary for the lawful conduct of the procedure under Art. 67, para. 5 PPL. With a non-Yu associationL, Art. 59, para. 6 of the PPL. With the participation of subcontractors, Art. 66 of the PPL. The provisions of Art. 65 of the Public Procurement Act. Offers are submitted to the address Sofia, Sv. Cl. 8 Ohridski Str., Technical University of Sofia, office 1317 - records. Internet address (URL): www.tu-sofia.bg
The bid deadline for Contract notice: Machining centre was 23 Apr 2020. Bidding is closed.
This tender has been issued by ТЕХНИЧЕСКИ УНИВЕРСИТЕТ — СОФИЯ in Bulgaria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42612000 - Machining centre.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 41309865. The purchaser document reference is 110553-2020.