Contract notice: Machines for inspecting Tender in Poland - 24143799
Tender notice from Poland, published on 13 Jun 2018.
Executive Summary
The POLSKA SPÓ?KA GAZOWNICTWA SP. Z O.O. has issued a Tender notice for the procurement of a Contract notice: Machines for inspecting the internal surface of pipelines in the Poland. This Tender notice was published on 13 Jun 2018 and is scheduled to close on 19 Jul 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 24143799, while the tender notice number is 253716-2018 and Register on the platform.
Key facts
Summary
Contract notice: Machines for inspecting the internal surface of pipelines
Object of the contract Machines for inspecting the internal surface of pipelines Description: Contract notice: Machines for inspecting the internal surface of pipelines Authority Type: Utilities entity Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: Lowest price CPV code: 42997100, 42997100, 42997100 CPV Description: Machines for inspecting the internal surface of pipelines. Delivery of devices for inspecting steel gas networks with a diameter of DN300, type piston intelligent Reference Number: 2018 / W001 / WP-000912 The subject of the order is the delivery of devices for inspection of DN300 steel gas networks of the type: • intelligent piston for geometry testing - 1 pc. • MFL intelligent piston (MFL-magnetic flux leakage) 1 piece and training of employees of the Employer and inspection of the ordering gas pipelines. Delivery of a device for inspection of steel gas networks of DN300 diameter, such as a piston intelligent for testing geometry. The intelligent piston should allow the possibility of making gas pipeline assessments, including cross-section geometry and longitudinal geometry diagnosticsgas pipeline. In the field of transverse geometry, the piston should make an assessment based on localized dents, changes in ovality, flattening, bending, joints faults, solid deposits, anomalies and other deformations. In the field of longitudinal geometry, the piston should make assessments based on spatially located: arches, crooks, branches, flange connections, sealing systems, electrical measurement points, pipeline sections made in a drilling technology, etc. Basic technical requirements: 1 The diagnostic device should enable: • operation in a gas medium at a maximum operating pressure of 80 bar, • recording of changes in the pipeline internal diameter of 1 mm • smooth crossing of arches to the level of 1.5 D (internal diametergas pipeline), • continuous pressure and temperature measurement, • overcoming bottlenecks up to 75% D (internal diameter of the gas pipeline), • single-use tests over a distance of at least 150 kilometers, • accuracy of positioning of detected defects 0.25 m, • accuracy of measurement distortion less than 1 mm, • minimum working time 100 h. 2. The designed piston body shouldn be hermetic, flameproof, meeting ATEX requirements. 3. The applied measuring systems should be resistant to impacts and contamination. 4. The piston should be equipped with inertial navigation, enabling cooperation with a marker system that allows for precise mapping of the test section of the gas pipeline. 5. The piston should be equipped with devices for recording the datawith a minimum capacity of 100 MB. 6. Recording of measurement data should enable: • preparation of a set of pipeline shapes, • spatial indications of diagnosed ovalization and flattening, • spatial information about deformation sites of the gas pipeline, • register of transverse welds together with their assessment, • record of errors in the gas pipeline, • records of existing channelsprisoners, cutters and other construction elements of the gas pipeline, • location of other places of deformation and anomalies, • location of deposits of solid materials, etc. Contractors, who: 1 may apply for the award of the order. they are not subject to exclusion from the proceedings, 2. meet the following conditions for participation in the proceedings: 2.1. they have competences or licenses to conduct specific activities-professional, if it results from separate regulations. 2.2. they are in an appropriate economic and financial situation. The Contractor will meet the condition if he proves that he is insured against civil liability for conducting activities related to the subject of the order (performing pipeline inspections) for at least PLN 1, 000, 000.00 for each part of the order ; in the case of a deposittender for two parts of the order for an amount of at least 2, 000, 000.00 PLN. The Contractor is obliged to attach to the offer a document confirming the possession of current insurance. 2.3. have certain technical or professional abilities, i.e .: demonstrate: a) experience in building intelligent pistons through implementation in the last five years before the deadline for submission of tenders, fora part of the order, at least one piston of similar design to this device, for which the offer is submitted, intended for pipelines with a diameter of not less than DN 300 and b) experience in inspecting pipelines using smart pistons consisting in performing in the last period five years prior to the deadline for submitting bids for pipeline inspections with a total ofj length of at least 180 kilometers, - the Employer may, at any stage of the proceedings, consider that the contractor does not have the required capabilities, if the involvement of technical resources or professional contractor in other economic ventures of the contractor may have a negative impact on the implementation of the contract. The Contractor may, in order to confirm compliance with the conditions of participation in the proceedings, as appropriateon the specific order or parts of it, rely on the technical or professional ability or financial or economic situation of other entities, regardless of the legal nature of the legal relationship that links it with it. The Contractor, which relies on the ability or situation of other entities, must prove to the ordering party that he will be disposing of the order the Contractor, who relies on the economic and financial situation of other entities, is jointly and severally liable with the entity that has committed to share the resources, with the necessary resources of these entities, in particular by providing these entities with the obligation to provide them with the necessary resources. the damage suffered by the ordering party arosek do not access these resources, unless the resource is not made available for fault. Assessment of fulfillment of the above conditions will be made in accordance with the formula "does not meet", based on information contained in a single document and documents to be provided by the Contractor to confirm fulfillment of the conditions for participation in the proceedings, a list of statements and documents confirming the fulfillmentno conditions for participation in the procedure and no grounds for exclusion: Together with the offer, the Contractor submits a statement as at the day of submitting bids in the scope indicated in this ToR in the form of a single document, subject to the requirements set out in points 8.3-8.10 of the ToR and documents referred to in point 8.11., 8.12., 8.13. and point 10 of the ToR (document confirming the deposit) and-supplemented with Annex 2 to the Terms of Reference and Appendix No. 3 to the Terms of Reference, as well as relevant powers of attorney. The Contractor shall submit other documents to the Ordering Party's request. The Contracting Authority informs that it will conduct proceedings in accordance with Art. 24 aa of the Act, which means that the Awarding Entity will first evaluate the offers, and then examine whether the contractor whose offer has been evaluated as the most advantageous, is not subject to-• Contractors who are in an appropriate economic and financial situation can apply for the award of the order. The Contractor will meet the condition if he proves that he is insured against civil liability for conducting activities related to the subject of the order ( performing pipeline inspections) for an amount of at least 1000, 000.00 PLN for each part of the order; in the case of submitting an offer in two parts of the order for the amount of at least PLN 2, 000, 000.00. The Contractor is obliged to attach to the offer a document confirming the possession of current insurance. 1. The Contracting Authority shall conclude a public procurement contract within a period not shorter than 10 days from the date of sending the notification on the most favorable selectionthe offer using means of electronic communication or 15 days if it was sent in a different way, not later than before the offer binding date. The contracting authority may conclude an agreement / contract regarding a public order before the expiry of the above-mentioned deadline, if only one offer is submitted in the procedure. 2. Contractor, within 3 days from the date of posting on the websiteinformation referred to in art. 86 par. 5 PPL, he provides the orderer with a declaration of belonging or non-affiliation to the same capital group (point 7.7 of the ToR). Internet address (URL): www.psgaz.pl Directive: Classical Directive (2014/25/EU)
The bid deadline for Contract notice: Machines for inspecting the internal surface of pipelines was 19 Jul 2018. Bidding is closed.
This tender has been issued by POLSKA SPÓ?KA GAZOWNICTWA SP. Z O.O. in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42997100 - Machines for inspecting the internal surface of pipelines.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 24143799. The purchaser document reference is 253716-2018.