Contract notice: Machines and apparatus Tender - 27725758
Tender notice from United Kingdom, published on 17 Oct 2018.
Executive Summary
The UNIVERSITY OF PORTSMOUTH has issued a Tender notice for the procurement of a Contract notice: Machines and apparatus for testing and measuring in the United Kingdom. This Tender notice was published on 17 Oct 2018 and is scheduled to close on 14 Nov 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 27725758, while the tender notice number is 453930-2018 and Register on the platform.
Key facts
Summary
Contract notice: Machines and apparatus for testing and measuring
Object of the contract Machines and apparatus for testing and measuring Description: Contract notice: Machines and apparatus for testing and measuring Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 38540000, 38540000 CPV Description: Machines and apparatus for testing and measuring. Depth Sensing Nanoindentation Instrument Reference Number : 18/SJM/18 The school of mechanical and design engineering requires a new depth sensing nanoindentation instrument for mechanical and tribological measurements. Requirement is for the supply, installation and commissioning of instrumented nanoindentation unit along with accessories, data acquisition and analysis software. The instrument will be used for teaching and research to measure and test various materials including, but not limited to: The school of mechanical and design engineering requires a new depth sensing nanoindentation instrument for mechanical and tribological measurements. The instrument will be used for teaching and research to measure and test various materials including, but not limited to: — polymers, — metals, — thin films, — biomaterials, — woods and composites in both ambient and — liquid environments. Specifications nanoindentation instrument for the measurement of hardness, elastic modulus and other material properties of bulk materials, from metals to soft polymers to biomaterials, as well as thin films ( 100 nm). Instrument should be capable to perform dynamic and quasi-static nanoindentation, imaging, and nanoscale scratching and wear testing with industry leading sensitivity, reliability and performance. Essential specifications: instrument should be equipped with indentation module (load controlled and depth controlled) allowing to measure various mechanical properties including (but not limited): — elastic modulus, — hardness, — creep, — fracture toughness, — interfacial adhesion. System should be able to provide indentation and friction measurements using tips with various shapes (Berkovich, sphero-conical, cube cone) as well as custom made tips (flat punch, steel/ceramic balls). Low indentation head: normal load ranging from few ?N (or lower) up to max several hundred of mN, with a normal load resolution in nN range, and displacement resolution below 1nm. In-situ drift compensation capabilities for best accuracy during the measurements. Motorised stage allowing automated and unattended operation. Stage must allow to mount and measure several simultaneously attached samples. Please state how many samples (include their sizes) can be attached. At least up to 5 mm height difference between samples must be manageable. The instrument should include a microscope with at least 5 MP colour camera, objective of minimum 10x optical magnification, and allow digital zoom. Sample manipulation and selection of test position should be simple and easily manipulated. Positioning accuracy should be better than 0, 5 ?m. Dynamic measurements (continuous stiffness) of mechanical properties as a function of contact depth, time and frequency. Instrument should be able to generate maps of measured mechanical properties such as hardness and modulus. In addition to standard instrument's performance, machine should be capable (or easily upgradable) to do high-throughput/high-speed mapping of mechanical properties in as short time as possible (for example, 100 indents in 10 minutes). In-situ Scanning Probe Microscopy (SPM) imaging module for high resolution 3D imaging of sample surfaces and ultra-precise indent placement from resulting images before and after experiments. Minimum available imaging size 5 x 5 ?m or lower, maximum size at least 80 x 80 ?m. Scan resolution: at least 256 lines per image. Instrument should be equipped (or easily upgraded) with scratching and wear module to measure friction, wear, film delamination. Friction load resolution in nN/?N range. Instruments should be accompanied with various indentation standards. Instruments should be accompanied with various indentation and scratching probes: 1 x diamond Berkovich indenters, 1 x 5 ?m radius sphero-conical indenter and 1 x cube corner. Other indenter geometries should be available. Instrument must be provided with, vibration isolation platform, thermal control chamber. System must be equipped with instrumented data recording computer system, and analytical software. Additional copies of the instrument software must be available for off line data analysis. Maintenance and warranty packages: in addition to standard warranty, there should be a choice of various comprehensive warranty packages. Software updates should be available free of charge for at least 3 years. Internet address (URL): http://in-tendorganiser.co.uk
The bid deadline for Contract notice: Machines and apparatus for testing and measuring was 14 Nov 2018. Bidding is closed.
This tender has been issued by UNIVERSITY OF PORTSMOUTH in United Kingdom.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 38540000 - Machines and apparatus for testing and measuring.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 27725758. The purchaser document reference is 453930-2018.
This tender falls under Technology and Equipment in United Kingdom. Suppliers in these sectors can track similar United Kingdom tenders using CPV-based alerts.