Object of the contractMachinery for working plastics
Description: Contract notice: Machinery for working plastics
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 42994200, 42994200, 42994200
CPV Description: Machinery for working plastics
Purchaser of treatment chemicals for the food industry
Reference number: 1 / Nov / 2018 / M PROLOG
Procurement of the coatings used for coating materials used in the food processing industry
Main Site: M PROLOG Logistics and Trading Ltd.
Thermoplastic procurator - 1 piece.
The special, individualheat demand of heat-shrinkable heat-shrinkable plastic materials used in the food industry. Applicable calibrators are 040 mm to 0105 mm. The grip is also suitable for the processing of prefabricated cast iron kitchens in a phase.
The artificial principle of gep is the following: start timethe handler moves the coil-foliate handle to the "START" pneumatic shaft, then foliate the workpiece, including the "spindle" insert, and place it on the START axle, with a handy servo-driven bushing provided with the appropriate fecund, with this ideal pile of chains.
The sum of the coils is the pneumatic pitch "CEL", also with the potentiometeryozhato, servo drive for axles to rotate. The "CEL" axle glasses can also be fitted with a crankshaft, which can be mounted in a watertight manner, with the help of four, one-sided, unmounted, foldable folding blades - ideally suited to the workpiece - from the technology to the front of the folders I.-II. raw material with heatthe shrinkage of the material, which the base material absorbs the shade. From raw materials of caliber and caliber, the pipe foil must be "felt" with air, which can be felt with needles - as required, periodically - if technologic demands.I can find preflop. The front panel leaving the working area leaves the "control" zone and passes through the coolant roller pallet II driven by the 2nd gear, where it cools down to an ideal heat source ( thermostat display on the control panel.)
The grip of the machinet has a driver's license. On the control panel you can use four, four-speed, upright cockpit, one-on-one, unmanned, manual control, allitas. The STOP connection is depressed by the squeegee and all the heat-sealed joints, including the pneumatic strands.
If the operator handles the workload during the work process, This technology, which is part of the equipment, is a toemoer test chain that is equipped with molded 'H and T' fittings conforming to the quality requirements of the food industry.
The chainwidth of each chain can be mutually allithato and the parts can be replaced. The term of casting is max. 30 minutes. The rusty stain is on the equipment(SS 1 4301) • Maximal clearance (HxSzxM): 2 500 x 1 800 x 3 200 mm
Power output: max. 15 kW. Required air demand: max. 150 Nl / min / (6 bar)
Only factory-ready for sale.
The full-scale person includes the delivery, delivery, delivery and delivery of the product (3 persons in the period), as well as a minimum of 12 months or 2 months in the event of a complete statement of reasons (whichever is the sooner it is omitted). (1) - (2) of Section 62 of this Act shall survive. and 321/2015. (X. 30.) Gov. 1-4, 6-8. - 10, 12-16. - basis:
To the timer, please see the Kbt. 67 (1) and 321/2015. (X. 30.) Gov. Decree No. 1.-4. Of the Kbt. Declaration of the European One Contracting Document, the Kbt. (4) of Article 69 (a) of the Hungarian statutory residence permit (s) and, where applicable, in respect of the eligible economic operator (s) in accordance with 321/2015. (X. 30.) Korm. Issued by a non-Hungarian resident (s) and, where applicable, the economic operator (s) who has received a matriculation certificate, in accordance with 321/2015. (X. 30.) Korm. Pursuant to Section 4, Section 6 and Articles 12 to 16 of the Korm. It shall also be justified by the provisions of - aexclusionary reasons for the lack of a pool.
The Single European Dealership Document is published in 321/2015. (X.30.) Of the Government Decree, Section 3 (2) and (3).
If a time-worker satisfies the requirements of a suitable body or body, he or she will accept all forms of identification too-(Section 67 (3) of the Kb.). In view of the provisions of Article 67 para. (4), it must be stated in time that he or she will not be required to complete the contract by the Contractor. 62. - For the exclusionary reasons and for the probable conditions of the trial, validates issued prior to the commencement of the trial may also be used (to uselhatoak) as long as the contents of the statement or the data contained in the verdicts are valid.
Provider of the rule excludes the timer against whom the exclusionary reasons are occurring. If applicable, the Kbt. According to Section 64, in accordance with the provisions of Article 188 (4) of the Order of the Hungarian Government, or in the case of a resignation of the former, -(2) (e) of Section 75.
1. The right to use the right to make a final decision in accordance with paragraph (5) of this Article shall not apply. In the entire territory of the locality you can download all the documents of the co-vendor by e-mail. The timeframes will be available to you from www.drnagymihalykft.hu cimen. You will find detailed information about the registration and registration of the website and the documentation of the document. If you have any questions about the documentation, please contact
[email protected] e-mail. The Biralati aspect: the best gold is the II.2.5. point of view. The timescales are according to criteriaand its upper limits are also high: 0-10. The listener is classified as a classified article based on the criteria given in the document, which is the case with the point (absolute) method. The method is detailed in Dokumentacio.
3. Article 71 (6) of the Hianypotlas provides a basis for its application
4. The runner attachesin accordance with the provisions of Article 9 (1) of the Law of the Ministry of Foreign Affairs of the Republic of Hungary, in accordance with Article 9 (1) of the Constitution of the Republic of Hungary, in accordance with the terms of the Documentation. In the case of a current lawsuit in progress, the 321/2015. (X.30) Government Order no. Section 13 is irrevocable, with negative content.
5. If a better timer is a testerI do not want to give you any info (checkboxes), then you need to indicate this in the EEKD, and all the other timers need to submit a formatting. The full-time counterparts of the co-operative timers are jointly and severally liable to the half of the party. For the Applicant, see the Kbt. Section 47 (2) basis Kbt. Article 66 para. (2) of the Constitution has been issued in the original stateand other documents may also be put in a masseuse.
7. The timing shall include the date of the Bidder. Section 66, subsection (6) a) and b), with the exception of the contents of the tender. Section 67 (4) and Kbt. Declarations pursuant to Article 66 (2) (4)
8. Requests must be made in 1 original box, submitted in a sealed bore. Thatfor full payment by electronic means, pdf. format on CD or mass media) must be attached to the form (s) corresponding to the formulation. The timeline should contain a reader that will give you the name of the Subscriber name and the details of the benchmark. The qualifying features and their certified modalities for the classification of the qualified timing notesyou will be asked about the quality criteria 10 strictly
10. In the foregoing, Dr. Tam-s Nagymihaly is accredited as a member of the Academy of Sciences, registered in: 00014, 6722 Szeged, Gogol u. 6 tel: 36 209648886,
[email protected].
11. A IV.2.6. the "2nd month" of the Kbt. Section 81 para. (11) is based on 60 days. The timekeeper tends to find the timers, to use the Kb. Section 81 (4) and (5).
13. In the procedure, applying the applicable law to 2017 evi CL. Article 260 of the Law on Public Procurement and the provisions of Section 24 of the Government Decree 465/2017 (XII.28.), as well as 272/2014. (XI.5) Government Order.
14. The timekeeper in the case of the 1st installment is 1.4 million, the second is 500 thousand, in the case of Case 3, it is worth HUF 400, 000 for the Providers of Time. Article 54 (1) to (2), (4) to (7). M Prolog Kft., Multiplex: KandH Bank 10402427-00029289-000000000, trial price: offer 1 / N / 2018 / M Prolog
15. The winning bidder is to be attached at the time of the contractual ballot box to the ISO 9001 quality assuranceend, or with it - 321/2015. (X. 30.) Korm. - 24 (3) - a one-way certificate.
Further info (due to character constraint) Design Documents.
Internet address (URL): http://www.mprolog.eu
Directive: Classical Directive (2014/24/EU)