Expired Tender United Kingdom ICB TOT Ref. 30564259

Contract notice: Machinery for the heat treatment Tender - 30564259

Tender notice from United Kingdom, published on 11 Feb 2019.

Executive Summary

The UNIVERSITY OF BIRMINGHAM has issued a Tender notice for the procurement of a Contract notice: Machinery for the heat treatment of materials in the United Kingdom. This Tender notice was published on 11 Feb 2019 and is scheduled to close on 21 Feb 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 30564259, while the tender notice number is 064294-2019 and Register on the platform.

Key facts

Summary
Contract notice: Machinery for the heat treatment of materials
TOT Ref. No.
30564259
Document Ref. No.
064294-2019
Country
United Kingdom
Notice type
Tender
Competition
ICB
Publication date
11 Feb 2019
Bid deadline
21 Feb 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Machinery for the heat treatment of materials
Description: Contract notice: Machinery for the heat treatment of materials
Authority Type: Body governed by public law
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: The most economic tender
CPV code: 42940000, 42940000
CPV Description: Machinery for the heat treatment of materials.
Mini Tender for the Supply and Installation of a Micro Plasma Treatment Station to the University of Birmingham (ESIF Funded)
Reference Number : SC7093/19
The University of Birmingham invites tenders for supply of a micro plasma treatment station. The workstation will be used to facilitate/support the take-up of high impact micro plasma processing technologies by the SMEs in West Midlands. In particular, it will be used to develop new applications with the technology provider and carry out feasibility studies and pilot projects to address the specific requirements of local SMEs. Therefore, it will be required as part of the project to build strong partnerships with the technology provider and define a joint co-funded R&D programme for the benefits of local businesses.
The University of Birmingham invites tenders for supply of a micro plasma treatment station. The workstation will be used to facilitate/support the take-up of high impact micro plasma processing technologies by the SMEs in West Midlands. In particular, it will be used to develop new applications with the technology provider and carry out feasibility studies and pilot projects to address the specific requirements of local SMEs. Therefore, it will be required as part of the project to build strong partnerships with the technology provider and define a joint co-funded R&D programme for the benefits of local businesses.
General characteristics:
A micro plasma treatment station that can be used for a range of non-contact, mask-less and selective plasma surface treatments, including surface pattering, printing, etching, activation, functionalisation etc., for both conductive and non-conductive substrates at low temperatures and at atmospheric pressures.
Specification:
1) A power supply generates the voltage needed for the different micro plasma modules of the micro plasma treatment station. The required high voltage for the generation of the plasma is in a range of 4 to 8 kVpp ac @ a frequency of ~70 kHz.
2) A micro plasma control unit for setting and regulating voltage, and communicating with the plasma head assembly, as well as the safety functionality for switching off the high voltage in the case the safety switch is pressed;
3) A XYZ motion platform for three dimensional motions of a plasma head assembly and an electrode table to hold the substrate workpiece of at least A4-size for the micro plasma surface treatment;
4) A micro plasma head assembly that is the mechanical and electronics interface between the micro plasma head and the XYZ motion platform. It can drive the plasma head in an accurate way, based on the signals obtained from the micro plasma control unit. At the bottom side a gas-flow nozzle should be attached to provide air or nitrogen gas and extract gases from the discharge region;
5) A PC-based controller with graphical user interface software for the selection of graphic files (preferred in jpg, png or bmp format), control of the motion of plasma nozzles and the establishment of the process parameters. This will enable digital selective plasma treatment and plasma surface patterning in particular directly from an electronic image for efficient process development and customised treatment;
6) The micro plasma treatment station should be able to produce high resolution surface patterns with high repeatability and digit accuracy. For air plasma treatment, the line width should not be larger than 150 and 250 microns on silicon wafer and polymeric materials, respectively;
7) A plasma head with multiple nozzles (20) is needed to ensure digit plasma treatment including printing, etching and patterning with high efficiency and high repeatability;
8) A gas flow nozzle with dielectric spacer insert parts for micro plasma treatment of conductive substrates;
9) The micro plasma treatment station should be sufficiently flexible to reconfigure with add-on optional modules to deposite coatings via plasma enhanced CVD and ALD;
10) A fiducial camera system for aligning the plasma position to a marked position on the substrates;
11) Well defined and agreed workflow with time line from the purchase order through factory acceptance tests to the site acceptance tests and training.
Optional component technologies:
1) A micro plasma viewing camera system with LAN industrial camera and optics to observe the plasma during the plasma process;
2) Gas handling modules for the supply and control of additional gases.
This project is being advertised in OJEU and is below the EU threshold spend. The time-scale which applies to OJEU will not apply in this project. Standstill period will be 10 days.
This project is funded by the European Structural Investment Funds (ESIF) and the procurement is dependent on the final funding agreement.
Internet address (URL): http://www.birmingham.ac.uk

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
The Provision of Security Screening Equipment for Hmp Dhekelia United Kingdom 152600576 14 Dec 2026
Heating Contract - South and East Belfast + Lisburn and Castlereagh United Kingdom 152583581 16 Dec 2026
Security and Fire Alarm Maintenance T26/0083 United Kingdom 152583313 04 Dec 2026
Supply, Installation and Commissioning of Wall-Mounted Air Conditioning Systems United Kingdom 152583031 07 Dec 2026
Active Gas Capture (Digested Sludge Degassing) Solutions United Kingdom 152582872 15 Jan 2027

United Kingdom Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Machinery for the heat treatment of materials was 21 Feb 2019. Bidding is closed.

This tender has been issued by UNIVERSITY OF BIRMINGHAM in United Kingdom.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 42940000 - Machinery for the heat treatment of materials.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 30564259. The purchaser document reference is 064294-2019.

See the Similar Tenders section on this page or browse other tenders from United Kingdom.

This tender falls under Technology and Equipment in United Kingdom. Suppliers in these sectors can track similar United Kingdom tenders using CPV-based alerts.