Object of the contractMachine tools operated by laser and machining centres
Description: Contract notice: Machine tools operated by laser and machining centres
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: Lowest price
CPV code: 42610000, 42610000
CPV Description: Machine-labeled laser and machining centers - Laser Labeling Equipment - Innovative Laser Labeling Equipment features a high versatility in Laser Labeling. It contains a measurement of the temperature profile of the marking chamber of the device so that when the temperature rises above the defined value, the device goes into the modeor has been stopped for an unavoidable period of time. It is equipped with a robotic arm for loading and unloading designated products into the labeling chamber, on-the-fly tracking conveyor and high-performance ultrasound for removing waste generated by laser marking into a special overlay. Use laser units to enable labelingThe main innovative site for laser marking of products is characterized by the high versatility of its use in the field of laser marking of products. It includes the measurement of the temperature profile of the marking chamber of the device so as to increase the temperature above the defined value of the deviceit did not enter refrigeration mode or was stopped for the necessary time. It is equipped with a robotic arm for loading and unloading designated products into the labeling chamber, on-the-fly tracking conveyor and high-performance ultrasound for removing waste generated by laser marking into a special overlay. Use laser units to allow-Labeling of products made of different materials in one labeling chamber
1.1 Only persons who satisfies the conditions for the participation in the personal situation pursuant to Article 32 (1) may participate in the public procurement procedure. 1 of the Public Procurement Act
1.2 Compliance with the terms and conditions under - 32 par. 1 applicant documents with the documents pursuant to - 32 par. 2, resp. ods. 4 and - 5 of the Public Procurement Act.
1.3 Applicant written inof the list of economic entities managed by the Public Procurement Office, pursuant to Section 152 of the Public Procurement Act, the documents required by - 32 par. (2) to replace the public procurement act by submitting the extract from the list of economic entities or by declaring the applicant to be included in the list of economic entities.
1.4. The fulfillment of the conditions of the contract can be proved by the submission of the UnifiedEuropean Document (JED). The draft of the first page of JED is an annex to the tender documents.
1.5 An economic entity with the status of a legal person to exercise personal status under Section 32 1 letter. a) the Act on Public Procurement is also required to submit a copy of the criminal record for the person who is issued by the General Prosecutor's Office of the Slovak Republic. Obligation to submit a statementfrom the criminal record of the legal person derives from Act no. 91/2016 Z. z. on the criminal liability of the legal persons and on the amendment of certain laws, which came into force on 1 July 2016.
Removal: the presentation of documents on personal status and property is in accordance with the provisions of Act No. 433/2015 Coll. Only the entity authorized to supply may be awarded a public contractovulation, perform construction work or provide service in relation to the main subject matter of the procurement. If the applicant or occupier has a place of business or usual place of residence outside the territory of the Slovak Republic and the statutes of his place of business or place of business or usual residence, he does not issue any of the above mentioned documents or does not issue any equivalent documents, they may be replaced by an affidavitin the status of his place of business, place of business or usual residence. If the right of the candidate or occupant's status with a seat, place of business or habitual residence outside the territory of the Slovak Republic does not regulate the institute of honesty, it may be replaced by a declaration made by a court, a body, a notary, another professional institution or a commercial institution under the regulations in force(b) Procurement of Innovation
1) The tender documents (SP) shall be published by the contracting authority in the profile kept in accordance with - 148 par. 3 of the Act on Public Procurement. The Public Procurement Provider will provide the SP in editable form by e-mail to interested parties by e-mail of the delivered written request for the provision of SP (the "request") to the e-mail
[email protected]. The interested person shall state in the application the identification data and the e-mail of the contact person to whom the contracting authority will send information on the publication of the SP explanation. 2) The communication and exchange of information between the contracting authority and the bidders / tenderers shall be carried out pursuant to - 187 par. 8 of the Act on VO by post, other agent, fax, electronically according to - 20 par. 1 abecause of their combination. The working time of the contact point of the contracting authority is on working days from 9.00 to 12.00, when it is possible for the interested parties to deliver the documents personally, unless otherwise stated. The exact termination of the personal delivery of a letter of credit must be agreed in advance by telephone or e-mail. 3) The facts concerning the procedure for the award of a contract, not modified in the noticethe award of public procurement and the tender documents are governed by the relevant provisions of Act no. 343/2015 Coll. (4) The fulfillment of the condition of part-time may be evidenced by the submission of a Single European Document pursuant to Section 39 of the Public Procurement Act and the documents proving the fulfillment of the conditions in part submitted to the contracting authority by the applicant in compliance with - 39 par. Article 6 of the Vera Lawprovided by the contractor within 5 working hours. (5) The contract with the successful applicant shall become effective upon the fulfillment of the deferred condition, provided that: (a) a valid and enforceable agreement is concluded on the date of delivery of the written request for delivery of documents proving the fulfillment of the terms and conditions. contract for the provision of a financial contribution between the relevant providerthe assistance to which the intermediary body (the Environmental Fund) and the beneficiary of the assistance to become a contracting authority are to be represented on the basis of its application for the financial contribution submitted in the framework of the call for the application for a financial contribution; and b) of the procurement procedure.
In the case of non-conclusion of the contract for a non-refunded financial contribution, butthe contracting authority reserves the right to use the institute of the deferral condition and, consequently, not to conclude the contract or to conclude the contract. 6) A successful tenderer as the supplier of the subject of the order is obliged to undertake the performance of the control / audit / verification related to the supply of the subject of the order at any time during its validity and learningthe activities of the NFP contract are performed in accordance with the relevant legal provisions of the Slovak Republic and the EU by authorized persons, The Ministry responsible is represented by its agency, ii. The Supreme Audit Office of the Slovak Republic, the Financial Control Administration Officer, the Certifying Body and their authorized persons, iii. The Audit Body, its co-operating bodies, and those charged with it, iv. The plenipotentiaries of the European Komission and the European Court of Auditors,
v. Persons invited by bodies listed on the list. (i) to (iv) in accordance with the relevant legal provisions of the Slovak Republic and the EC, and to provide them with all necessary assistance. 2 ZVO: The device is a functional, highly sophisticated unit with mutually interconnected parts. The process of designing the device must be taken into accountie compliant parts with respect to the mechanical, electrical and automation parts. A necessary condition is to achieve the highest degree of interoperability of the automation components, since these are keyed to the correct operation of the device in real time. The above-mentioned requirements and final dismantling of the device in assembled condition can be achieved due to the complexity of the deviceonly in case of delivery of equipment from a single supplier
Internet address (URL): http://www.imachines.sk/
Directive: Classical Directive (2014/24/EU)