Contract notice: Machine tools Tender in Hungary - 37917914
Tender notice from Hungary, published on 12 Nov 2019.
Exeutive Summary
The ELECTRAPLAN-TERMEL? KORLÁTOLT FELEL?SSÉG? TÁRSASÁG has issued a Tender notice for the procurement of a Contract notice: Machine tools in the Hungary. This Tender notice was published on 12 Nov 2019 and is scheduled to close on 18 Dec 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 37917914, while the tender notice number is 534290-2019 and Register on the platform.
Object of the contract Machine tools Description: Contract notice: Machine tools Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 42600000, 42600000, 42630000, 42600000, 42630000, 42635000, 42415000 CPV Description: Machine tools. Metal-working machine tools Die-stamping machines Forklift trucks, work trucks, railway-station platform tractors Machine purchases under GINOP-1.2.8-17-2017-00010 Reference Number: EKR001363302019 Purchasers must comply with the relevant test requirements as detailed in the Co-Procurement Documentation. Purchasing from the following files all: Item 1: Profilinggepsor (2pcs); File 2: press cheetah (min. 63t); File 3: Cable clamp assembly kit (2pcs) together with the associated compressor; Item 4: Press chassis (min. 80t), Item 5: Forklift (2pcs) (min. 5t). Details and quantities can be found in the Technical Specifications for the Co-Procurement Document.Sales of 2 pieces of profiling machines (hereinafter referred to as equipment) according to the technical requirements defined in the technical specification, hereinafter referred to as "equipment", installation and commissioning of the treatment (max. 3 persons). The profiling line should be suitable for coils of 0.4-4mm thicknessprofiling his steel plates. The production line shall include an automatic sheet metal wrapper with a minimum capacity of 5 tons with a 4/4 drive, and shall be equipped with an automatic 4/4 sheet sheet with a straightening underfloor. which allows for a continuous feedrateValid specifications and information can be found in the Technical Specifications for the Collaborative Procurement Document. Any of the grounds for exclusion listed in Article 62 (1) to (2) shall apply.a rider for which any of the applicable exclusion criteria apply. The Kbt. Pursuant to Article 74 (1) (b), the tenderer shall exclude from the procedure any tenderer, subcontractor or duly accredited body which has been excluded from the procedure in the course of the procedure. The Kbt. Section 67 (1) of the Kbt. OtherIn the course of presenting the offer under this co-procurement procedure conducted by Odik Resze, Act 321/2015. (X.30.) On the basis of Section 1 para. As stated in this chapter, you must prove in advance that you do not belong to the Kbt by submitting the Single European Co-Procurement Document (EEKD). Article 62 (1) - (2) is subject to the power of exclusion. The Egyseges In the European document, the economic operator (the proposing organization (s) that makes available its capacities) declares that the grounds for exclusion do not prevail against it, and gives it a fair share of the garden information. The statement must include a statement that the Kbt. Statement of certificate to be submitted pursuant to Article 69 (4)t a Kbt. (B) of Article 69 (11) and a statement attached to the application. The Kbt. The exclusion reasons listed in Section 62 para. -, 10. - es 12-16. -. Koezoes suggestion Each of the koezoes offerers must submit a blank form.If the bidder wants to meet the required suitability requirements based on the capacity of another organization or person, Kbt. Article 67 (3) and Article 321/2015. (X.30.) On the basis of Article 15 (1) of the Government Decree 321/2015. (X.30.) Kormmod. In respect of subcontractors who do not qualify for certification, Kbt. 67. (4), the Provider is required to submit a statement of the reasons for the exclusion for reasons of maladministration. Timeline for Kbt. According to - 69 (4) to (7), jar is done miserably. The timeline below the Kbt. Pursuant to - 69 (4) - (7), certificates relating to the grounds for exclusion are submittedthe consultant called Kbt. The grounds for exclusion listed in - 62 (1) (2) remain unresolved by the provisions of Act 321/2015. Government Decree Articles 8, 10 and 12-16. -. Commitment draws attention to Kbt. 69 (5) to (7) and (9) to (11), (11a), (13) to (14). The strength of time draws the attention of reviewers to the Kbt. The clarification provided for in - 64. No. 321/2015. (X. 30.) Korm.Pursuant to Article 1 (7) of the Decree, certificates issued prior to the commencement of co-procurement may be retrieved (used) for reasons of exclusion and suitability, as long as the contents of the certificate and the information contained therein are accurate. are specified in all aspects. Economic eand penzuegy's eligibility criteria are not defined in the Procedure. bases its co-purchasing operation on an electronic co-purchasing system (EKR) operated by the responsible minister [Kbt.40 (1)]. Accordingly, the proposals (hereinafter referred to as "AJ") shall be submitted in the ECF, subject to the ECR. 11. --anak (9) withoutinitially busy. The timeline below gives the filename format to be used for submitting quotes: a readable and non-editable pdf. 2. The timeliness calls attention to the fact that the use of the ECR, such as the preparation and submission of the ECR, requires registration from an authorized person [ECR -6 (1)]. 3. The timeline fedraws the attention of the bidders to the fact that the offer should be monitored in accordance with Kbt. 41 / A. (1) and (3). 4. Compliance of the Offeror (hereinafter: AT) with the appropriate requirements and not justifying the exclusion reasons is provided by Kbt. Article 69 (11a) may also apply. 5. Time power in the ECT was done electronicallycompliance with the personal representation rights and the representation rights of koezoe advisors who have submitted a statement to Kbt. 41 / A. -- (4) - (5) based on your exam. 6. The offer shall be accompanied by a reading sheet (Kbt. 66.6 (5)) with a copy of the form provided in the ECR, subject to the provisions of the ECR. Article 11 (1), first paragraph. 7.AJ must contain the AT statement in accordance with section 66 (2) (6) Kbt.statement (even in the case of a negative statement). Receipt of documents iranyado: Kbt.47 -2 (2), (2a); Yes. 41 / A. 8.Toebb AT can also make offers on koezoes AT (koezoes AT). 9. Eligibility Criteria for ATs for Qualified ATs Note (M. 30 (4)) stricter (M / 1.) ) e). 11. Kbt.73 - (5): AK is the koezbeOrganizational documents (hereinafter referred to as KD) shall name the organizations from which the AT may receive information on the co-requisites under Section 73 (4) of the Kbt which must be complied with. 12. The best selling value in every case is gold, Kbt. Section 76 (2) para. (c). Score also es: 0-100 for all grades. Selling method: 1st file: 1st post. aspect (Egyoesszegűnet offer price): reverse gold certificate, 2-3. ert. Aspect: The most favorable level and the most unfavorable variation of coezoet according to the following formula: Examinated = (Examinated Unfavorable) / (Unfavorable Unfavorable) x (Pmax Pmin) Pmin 2. Res. Aspect Criteria (Single Net Offer Price): Reverse Gold Certification, 2-3. ert. aspect: according to the following picture: Ptested = (Examined Worse) / (Worst Worse) x (Pmax Pmin) Pmin; Res. 3: 1st. Aspect Criteria (Single Net Quote): Reverse Gold Certification, 2-5. ert. aspect: according to the following formula: Tested = (Tested Lowest) / (Lowest Fewer Less) x (Pmax Pmin) Pmin; Res. 4: 1st. Aspect Criterion (Single - Net Net Pricing):ditott golden certificate, 2-3. ert. aspect: according to the following formula: Tested = (Tested Lowest) / (Lowest Fewer Less) x (Pmax Pmin) Pmin; Res. 5: 1st. Aspect Criteria (Single Net Quote): Reverse Gold Certification, 2nd and 4th. Aspect: According to the following picture: Examined = (Examined Worse) / (Worst Worse) x (Pmax Pmin) Pmin; 3 rd. Aspect: Absolutely valuable. In all cases, points of reference and evaluation methods are required in the co-purchasing documentation for detailed definition and description. 13.AK excludes project partnerships for ATs and co-ops. Continued: AF VI.4.3) Internet address (URL): http://www.electraplan.hu
The bid deadline for Contract notice: Machine tools was 18 Dec 2019. Bidding is closed.
This tender has been issued by ELECTRAPLAN-TERMEL? KORLÁTOLT FELEL?SSÉG? TÁRSASÁG in Hungary.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42600000 ~ Machine tools ~ https://www.tendersontime.com/hungary-tenders/machine-tools-tenders/, 42630000 ~ Metal-working machine tools ~ https://www.tendersontime.com/hungary-tenders/metal-working-machine-tools-tenders/, 42635000 ~ Die-stamping machines ~ https://www.tendersontime.com/hungary-tenders/die-stamping-machines-tenders/, 42415000 ~ Forklift trucks, works trucks, railway-station platforms tractors ~ https://www.tendersontime.com/hungary-tenders/forklift-trucks-works-trucks-railway-station-platforms-tractors-tenders/.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 37917914. The purchaser document reference is 534290-2019.