Contract notice: Lifting and handling equipment Tender - 40320886
Tender notice from Poland, published on 05 Feb 2020.
Executive Summary
The DYREKTOR URZĘDU MORSKIEGO W GDYNI has issued a Tender notice for the procurement of a Contract notice: Lifting and handling equipment and parts in the Poland. This Tender notice was published on 05 Feb 2020 and is scheduled to close on 13 Mar 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 40320886, while the tender notice number is 055883-2020 and Register on the platform.
Key facts
Summary
Contract notice: Lifting and handling equipment and parts
Object of the contract Lifting and handling equipment and parts Description: Contract notice: Lifting and handling equipment and parts Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: The most economic tender CPV code: 42400000, 42414000, 42400000, 42414000, 42415110 CPV Description: Lifting and handling equipment and parts. Cranes, mobile lifting frames and works trucks fitted with a crane. Forklift trucks. Purchase of a forklift and truck crane under the project "Integrated navigation marking system with e-Navigation elements" Reference Number: ZP.371.2.2020.ASZ 1. The subject of this public contract is the delivery of a forklift and a truck cranehim, as part of part 1 and part 2 of this public contract. The subject of the order: a truck crane and a forklift truck were described in detail in the technical specification forms constituting Annexes 1.1 and 1.2 to the ToR separately for each part. Main Site: The place of receipt of the complete crane will be the seat of the Contractor, Poland Part 1: Delivery of the truck crane. Factory Defno new truck crane mobile wheeled crane on 3-axle truck chassis with 6 x 2 drive system and rear steering axle. The Employer allows a crane with a minimum lifting capacity of 20 t, but not more than 25 t. The offered crane must come from the official distribution channel in Poland and have a minimum 12-month warranty for the crane and chassis. As part of the order Wykthe orderer will prepare full documentation and complete set of documents required for vehicle registration in the UDT and will perform the first registration and entry into service of the crane at the Office of Technical Inspection. A complete crane must meet the requirements in Poland resulting from the Act of 20.6.1997 Road Traffic Law and executive ordinances to this Act. Contractory documents necessary for registering the lift in the communications department. In addition, the Contractor shall provide training for operators on crane operation and work safety at their own expense. The contractor provides for a fee an authorized warranty and post-warranty service for the crane as well as the supply of spare parts and consumables. The Employer estimates that the annual mileage of the crane will not exceedover 10, 000 km (chassis) while the number of crane operating hours will not exceed 500 mth. The warranty period for physical and legal defects of the subject of the contract is counted from the issue of the subject of the contract and ends on the day the guarantee ends. The place of receipt of the complete crane will be the seat of the Contractor. The subject of the order under Part 1 has been described in detail in the technic specification formz o.o. (Annex 1.1 to the ToR). The deadline for performing the contract is determined separately for each part of the contract: part 1: delivery of a truck crane up to 7 months from the date of signing the contract. The contracting authority does not specify the conditions in this respect. 1 Each Contractor must attach to the offer a valid statement as at the date of submitting the offers in the form of a single European order document, hereinafter referred to assingle document or EAT. The information contained in the single document constitutes preliminary confirmation that the Contractor is not subject to exclusion and meets the conditions for participation in the procedure. The single document for the proceedings in question is Annex 2 to this ToR. 2. In the case of joint application for the Contractors by the Contractors, the statement referred to in paragraph 1 above, compositionEach of the Contractors jointly applying for the order. 3. The contractor who intends to entrust the execution of part of the contract to subcontractors is required to complete Part II Section "D" EAT and indicate the parts of the contract which he intends to entrust to subcontractors and, if known, provide subcontractor companies. 4. Detailed information on the method and form submission EAT: 1) The Ordering Party publishes on its website, which has a link to the https://umgdy.ezamawiacy.pl platform, which is a tool for communication and submission of bids together with the tender documentation, EAT form (file in * .xml format); 2) to open and fill the file in * .xml format: - download and save the above. file to your computer, - go to the website: Urząd Zpublic listings, and then click the link http://espd.uzp.gov.pl/, - select the option "I am a Contractor" and I want to "view ESPD", - then select the "browse" icon and import the above file, - an editable version of the EAT opens, which must be completed, - the finished document should be signed by a qualified electronic signature; 3) the obligation to submit the EAT in electronic form bearing thean electronic signature in the manner specified above also applies to EAT submitted upon request pursuant to art. 26 section 3 of the Public Procurement Law 5. The Contractor, who refers to the resources of other entities, in order to demonstrate the absence of grounds for exclusion against them and fulfillment in the scope in which he refers to their resources, the conditions of participation in the proceedings also makes a statement about whoreferred to in item 1 regarding these entities in the form of a single European order document, signed with an electronic signature qualified by persons authorized to represent the entity. The Employer does not specify the conditions in this respect. 1. The offer must be made and submitted under pain of nullity in electronic form via the platform available at: https: //umgdy.ezamawiajacy.pl. 2. The Contractor is obliged to lodge a deposit before the submission deadline, in an amount determined separately for each part of the contract: - for lot 1 in the amount of: PLN 20, 000 (say: twenty thousand 00/100), - for lot 2 in the amount of: 6 PLN 000 (say: six thousand 00/100). 2. The bid bond may be lodged in: 1) money; 2) bank guarantees or a suretycooperative savings and credit unions, except that guaranteeing the cash is always a monetary guarantee; 3) bank guarantees; 4) insurance guarantees; 5) guarantees granted by entities referred to in art. 6b paragraph 5 point 2 of the Act of November 9, 2000 on the establishment of the Polish Agency for Enterprise Development (Journal of Laws of 2007 No. 42, item 275 as amended). 3. The bid bondin the form of money, it must be paid by bank transfer to the following account of the Employer: 81 1010 1140 0065 7813 9120 0000. Name of the beneficiary: Director of the Maritime Office in Gdynia ul. Chrzanowskiego 10, 81-338 Gdynia, POLAND. Name and address of the bank National Bank of Poland District Branch in Gdańsk, ul. Okopowa 1, 80-958 Gdańsk, POLAND. IBAN code (IBAN Code) PL 81 1010 1140 0065 7813 9120 0000. Swift code (Swift Code) NBPLPLPW with a note on the transfer: "Bid bond in proceeding No. ZP.371.2.2020.ASz Applies to the part ......" referred to in item 3, before the submission deadline (i.e. before the day and time set as the final submission deadline). 5.he recommends that if the bid bond is paid in cash, the Contractor together with the offer scan a document confirming the payment of the bid bond. 6. The Awarding Entity allows the lodging of a bid bond in one of the forms mentioned in point 2 point 2 5, where: 6.1. the bid bond in electronic form must be submitted in the original in the form of an electronic document signed by a qualified signatureelectronically by the exhibitor (e.g. bank, insurer). The contractor encloses the bid bond on the platform in the "Offers" tab by selecting the "add document" command; 6.2. if the bank granting the guarantee does not issue a security in the form of an electronic document signed by a qualified electronic signature, the security must be lodged in writing (on paper)and submitted to the following address: Maritime Office in Gdynia, ul. Chrzanowskiego 10, 81-338 Gdynia, POLAND (office, room no. 8). The bid bond should be submitted in a sealed envelope at the Employer`s office and marked as follows: Maritime Office in Gdynia, ul. Chrzanowskiego 10, 81-338 Gdynia, POLAND, Public Procurement Department. Deposit in the proceedings for: Purchase of a forklift and truck cranecase number: ZP.371.2.2020. SAz part no ................; 6.3. in order to fulfill the obligation arising from the principle of communication and exchange of information by electronic means, the Contractor submitting a non-cash security deposit in paper form must submit in the electronic offer a scan of the paper security deposit and provide the scanned file with a qualified electronic signature (thus the Contractor withcertifies that the graphic representation of the bid bond in the form of a guarantee, i.e. a scan thereof, in an electronic copy is identical to the guarantee in the paper version). 7. Detailed information about the bid bond is contained in Chapter VIII of the ToR: Requirements regarding the bid bond. Internet address (URL): www.umgdy.gov.pl
The bid deadline for Contract notice: Lifting and handling equipment and parts was 13 Mar 2020. Bidding is closed.
This tender has been issued by DYREKTOR URZĘDU MORSKIEGO W GDYNI in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42400000 - Lifting and handling equipment and parts, 42414000 - Cranes, mobile lifting frames and works trucks fitted with a crane, 42415110 - Forklift trucks.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 40320886. The purchaser document reference is 055883-2020.