Contract notice: Lathes Tender in Hungary - 36070459
Tender notice from Hungary, published on 05 Sep 2019.
Executive Summary
The MÁV-START VASÚTI SZEMÉLYSZÁLLÍTÓ ZRT. has issued a Tender notice for the procurement of a Contract notice: Lathes in the Hungary. This Tender notice was published on 05 Sep 2019 and is scheduled to close on 07 Oct 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 36070459, while the tender notice number is 418579-2019 and Register on the platform.
Object of the contract Lathes Description: Contract notice: Lathes Authority Type: Utilities entity Contact Nature: Supplies Procedure: Negotiated procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 42621000, 51120000, 42621000, 51120000 CPV Description: Lathes. Installation Services of Mechanical Equipment. Purchase and Installation of Turning Lathes Reference Number: EKR000330622019 Procurement, Installation and Installation of Turning Lathes in Szeged Main Site: 6729 Szeged, Director's Office Station Purchase, installation and commissioning of Szeged underfloor lathes, manufacture, transportation, fullpites, putting them in place, conducting my probe. Preparation of railway licensing documentation for underground wheel lathe, installation site and commissioning, obtaining permits. in the circular turning hall shown in the enclosed floor plan, the elfer and the beluel can be installed in the circular turning shaft (13, 3x6, 8x2, 7 m). Wheelbarrow turning hall 9.5 m wide, 39 m long, internal height 9.5 m measured in the coaxial pits of the curb axisWheels with front and inner bearing housings with lathes for turning lathes. and any type of round profile programmerand two round profile lathes should be suitable Underfloor lath construction and commissioning (and related documentation) will be the responsibility of this successful Seller. Equipment specifications: 35mm - Maximum wheel diameter, before machining: 1500 mm - Minimum wheel diameter after machining: 600 mm - Maximum wheel thickness: 90-150 mm - Maximum axle load: 22x10KN - Minimum axle load: 12x10KN (with 2x6t load capacity) - Rail speed range: 20-130 m / min - Rail speed : 80 m / min - Maximum spin cross section for one word: 10 mm - Axial speed: Xmax = 3000 m / min; Zmax = 4700 m / min, the speed should be the gol - Hydraulic motors with axial piston pumps - Total installed capacity ≈100KW - Tool machine size: Adapt to the technical specifications of your site: ≤0.10 mm - Forgovaz four wheels diameter coezoetticantilever: ≤0, 30 mm - Radial runout for wheel arch: ≤0, 10 mm - Axial runout for round wheel curbs: ≤0, 10 mm - Machining precision: ≤0, 15 mm - Machined wheel finish: Ra = 10/40 μm - Axialis runoff of machinegun after machining: ≤0.05 - Flatness of machinegun after machining: ≤0.05 / 100 mm - Capacity of machinegun after machining: Ra = ≤60 μm - One railtime required for re-profiling of wheels of the wheel industry properly crimped with working fluid: max. 60 min. The following cases are not included: Time for tossing to the next axis Shovel removal, cleaning before sea, etc ... Kueloenfel disassembles from series (eg disassembling sandbox before turning) Ultrasonic material examination (wants toebbszoer also) crackedin case of monoblocks round Stability of flat, loaded wheels, swaps, base and load Handling of wheel runs, max. The details can be found in Appendix II of the Co-Procurement Documents. This section contains the Technical Specifications.) in the Kbt. - 62 (1) - (2) are excluded from the exclusion grounds. (X. 30.) Kr. 1-16. With regard to the application for reclaiming: (X. 30.) Cr.II. As appropriate, the Single European Co-Procurement Document (ECE) ElectronicYou must prove in advance that you do not belong to the Kbt. Article 62 (1) to (2) shall be subject to the authority of the Government. Bidding force in the ECD is provided by the Co-Procurement Documents, available electronically in the ECR.takes into account, in particular, the statement contained in the EEKD, the performance of the ex ante certification test; in this regard, the Bidder shall disregard and disregard any justification for inclusion in the application for recruitment which is related to the foregoing reasons, other than that contained in Decree 321/2015. (X. 30.) Declaration, document in accordance with Article 4 (1) of the Act. AlvallaCertification and Approval for a Recipient Organization: (X. 30.) K. r. Exclusion reasons must be justified in accordance with - 15. The EECD to be submitted in respect of the sub-contracting entity of the suitability certificate shall be endorsed in the EKR by the economic operator entering the application. [321/2015. (X. 30.) Cr. 3. - (3(a).] In the application for recourse, the subcontractor who does not accept the recapitulation shall accept the Kbt. It is also prudent to submit a declaration pursuant to Article 67 (4) stating that it does not take into account the subcontracting of the contract performance under the exclusive grounds provided for in Article 62 (1) - (2). Section 62 (1) a), b), e), h), j), l), n) and p) shall always be counted from the date when the exclusions are not maintained. Article 69 (4) to (6):in the case of the Government of the Republic of Hungary. (X. 30.) Cr. III. Chapter 8, Section Kbt. Excluding grounds under Section 62 (1) kb) of the Kbt. Article 62 para. (X. 30.) Cr. III. Chapter 10, Section Kbt. Excluding grounds under Section 62 (1) kb) of the Kbt. 62 (1) kb) The Kbt. Section 69 (11a) alapjan is a promoter / person / organization providing capacity, the Ajanlatkforce a Kbt. In a statement under - 69 (4) to (6), they must state whether or not, in the case of co-procuration by the Tender Force, prior to the exclusion reasons being excluded, or the right oneVerification Consideration provided for the performance of agri-auditors. If a person / organization providing an offer / capacity wishes to have any previous attestation taken into account, the statement must include the stated procurement agreement and a statement based on clearto be identifiable. Awareness of the Kbt. It does not repeatedly include statements made during the filing phase in the EECD in its Article 69 (4) - (6) statement. P / 1. Applicant for filing for filing filing in advance Kbt. Section 67 para. (X. 30.) Government Decree II. According to the chapter, he declares in EEKD. (X. 30.) Government Decree 19 (1) b(c), for the previous three business years at the merchant turn, calculated on the basis of full - time sales tax, regardless of when the claimant came to the business or when he started to act. that, with regard to the ex ante verification of the aptitude, it is the eljarcan only take into account the statement contained in the EEKD during the filing phase in the pre-certification test performance; in this regard, the Bidder shall not take into account or acknowledge any other certificate that may be included in the application by the Recruitment Applicant at any time, which is related to the suitability of the suit to be proved; (X30)Gov. Decree 321/2015. (X. 30.) Korm. basically indicates that the ex-ante certification of the suitably qualified person accepts the simple declaration made by the person / organization applying for a file or attesting to suitability in the EEKD (onlyIVD. the file must point α, IV. ) Certificates of Eligible Testing Requirements in the Period of Proposition. - 69 (4) to (6), as follows: P / 1. The Offeror must enclose the company-specific statement in 321 /(X. 30.) 2015 on the basis of Article 19 (1) (c) of the Government Decree on the total revenue of the preceding three business years, calculated at merchant turn, irrespective of when joett set up and when he started his activity 1. Due to TED's strict character limit, timeouts are full on other informationen and in detail in the Co-Acquisition Documents. 2. This co-procurement procedure is a procedure for cross-border co-operation in the ECT, so the provisions of the ECT Regulation are applicable. Registration for the use of the ECR (https://ekr.gov.hu) is required by Article 6 of the ECR Regulation. The operation and maintenance of the ECT shall be governed by Act No 27/2017. (XI. 6.) MvM on the basis of the NEKSZT National Electronvegzi Ltd. (http://nekszt.hu). Instructions on how to use the ECF are available at: https://ekr.gov.hu/portal/tamogatas; and http://nekszt.hu/tamogatas 4. In the present proceeding, Kbt. Article 57 (2) does not apply. 5. On the basis of Article 10 (2) of the ECR Decree, if a model declaration is available in the electronic form of the declaration in the language of the declaration, The form must be followed by the offer or application filed by the candidate. 6.Attention is drawn to the fact that the ECA Regulation is the Kbt. of the Government of the United States of America may, by reason of the electronic practice of the acts of Eljar, depart from the provisions of this Act [Kbt. 41 (6)], so I shall take greater account of the Kbt. they also have the rules of the EC Regulation! Legal basis for the negotiated procedure: 307/2015. (X. 27.) Reg. Pursuant to Article 2 (2) of the Kbt. Qualifies as a "Giving Power" under Section 6 (1) (c). Timeline for Kbt. Article 66 para.b) Subcontractor submitting for recourse, b) Subcontractors known in the course of submitting the reciprocal claimant have been excluded for these submissions. when you submit a filing application you can't name it the filing signThe following must also be included in the statement. Bidding conditions and eligibility criteria for qualified tenderers are more stringent with respect to all eligibility criteria (P / 1, M / 1) [321/2015. (X. 30.) Corporal rend. 30. - (4)]. 10. No. 321/2015. (X. 30.) Corporal rend. Subject to - 13, the person applying for recourse shall be recaptureddeclare in your application (form) whether or not you are subject to variation registration. Timeline for Kbt. - 75 (2) para. (e) shall not be used. Bidding does not appeal to the admission of the bidders. We call the attention of economic operators to the fact that44/2015. (IX. 2.) MvM decrees based on Article 1 (1) and (4) of the MvM Decree initiating the procedure published on TED VI.5. : Tibor Monostori, Registration number: 00955 15. The bidding power is 60 days during the 2 months mentioned in point IV.2.6), given that the time power is given to the co-procurerpre-procedure is carried out under the supervision of a supervisor. Applicants for resume opening time: 7.10.2019 12: 00 Internet address (URL): http://www.mavcsoport.hu
The bid deadline for Contract notice: Lathes was 07 Oct 2019. Bidding is closed.
This tender has been issued by MÁV-START VASÚTI SZEMÉLYSZÁLLÍTÓ ZRT. in Hungary.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42621000 - Lathes, 51120000 - Installation services of mechanical equipment.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 36070459. The purchaser document reference is 418579-2019.
This tender falls under Technology and Equipment, Defence and Security in Hungary. Suppliers in these sectors can track similar Hungary tenders using CPV-based alerts.