Expired Tender Hungary ICB TOT Ref. 37753897

Contract notice: Laboratory, optical and precision Tender - 37753897

Tender notice from Hungary, published on 06 Nov 2019.

Executive Summary

The MISKOLCI EGYETEM has issued a Tender notice for the procurement of a Contract notice: Laboratory, optical and precision equipments (excl. glasses) in the Hungary. This Tender notice was published on 06 Nov 2019 and is scheduled to close on 05 Dec 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 37753897, while the tender notice number is 524986-2019 and Register on the platform.

Key facts

Summary
Contract notice: Laboratory, optical and precision equipments (excl. glasses)
TOT Ref. No.
37753897
Document Ref. No.
524986-2019
Country
Hungary
Notice type
Tender
Competition
ICB
Publication date
06 Nov 2019
Bid deadline
05 Dec 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Laboratory, optical and precision equipments (excl. glasses)
Description: Contract notice: Laboratory, optical and precision equipments (excl. glasses)
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union, with participation by GPA countries
Award criteria: Lowest price
CPV code: 38000000, 38000000, 38000000
CPV Description: Laboratory, optical and precision equipments (excl. Glasses).
Purchase of EMC enclosure and accessories
Reference Number: EKR001330072019
Purchase contract EMC enclosure and accessories
Main Site: Works site: 3515 Miskolc, University, EMC lab epuelet
1 db Semi-anechoic (Semi Anechoic Chamber SAC) EMC submersible chamber supply and accessoriesnor is it installed, validated, and tested for contract performance on a number of occasions and by method. The submersible chamber must meet the full compliance test for radiation emissions and immunity and the standards listed in the technical specification for the characteristics of the submerged site.glass (DUT) is a glazing unit for a standard 3 meter distant standard. Usage frequency range from 10kHz to 40GHz.
The enclosure shall conform to the specifications of EN 50147-1 for the shielding of the windows, The panels shall be made of hot-dip galvanized steel sheets at least 2 mminel with radio frequency insulator. Doors, walls and ceilings should be covered with ferrite tiles in full seams, with aluminum foil underneath and tile screwed. The absorbing elements used must withstand a constant flow of 500 V / m. The metal floor of the chamber shall have a double floor with a height of at least 200 mm andbe capable of withstanding a min. load of 500 kg / m. For the connection to the on-site air conditioning system, there should be 6 ventilation arrows. The size of the enclosure including the mechanical carrier structure is 10 x 6.7 x 6.2 meters (length x width x height). Clean inside dimensions (from absorber to absorber and from absorber to absorber) min 8 x 4 x 4.8 meters(length x width x height)
Be fitted with a swivel table. Interior lighting: 4 halogen lamps with a minimum power of 300W each. The submersible chamber shall have at least 1 wall lead-in point, 4 floor-mounted metal compartment compartments, 3 filter-mounted access points, one electrical floor compartment mounted metal floortable top connection with side wall plug-in connection with one hinged door. up to CISPR16-1-1, Time Domain Scanpes dip receiver, dip software for fully automated EMI dimmers, USB A GPIB (IEEE 488 24-pin) connector transformer cable, DC blocker, dive antenna for 30MHz 6GHz, active bot antenna for 9KHz 30MHz frequency band, 2-wire V-series, preamplifier for antenna antenna, brush generator and reference radiator, cables, coaxial antennae, signal lugs, torque wrench
Validation: Validation of the required parameters of the chamber in the installation test and in accordance with the technical standards, based on tests performed in accordance with the applicable standards. Validation is included in the bid. The validation method, process, frequency and duration are governed by the applicable standardszerin must be glazed blindly for validated results to conform to the standards.
Jotallas: 5 years for the power of the shields and absorbers, and 2 meters for the filters of the dot points and the positioning system (turntable, antennaarboc, controller). Certification by someone certified by the EMC chamber and accessories manufacturer
Betanitas: At the place of performance, up to 5 people in 8 hours: Proficiency in EMC software operators
Bidder considers new tool not used, presented or probed by manufacturer. as a rule, cannot be an advisor, sub-contractor, azdasagi, against whom Kbt. Article 62 (1) and (2) apply for any of the following exclusive reasons:
Verification:
a) Section 67 (1) para. es a 321/2015. (X. 30.) Korm. on the basis of the single European Co-Procurement Document (ESPD), it must first prove that it is not subject to thethe. The ESPD form shall be included in the co-acquisition documents. (B) Section 3 (5) of the Cr. (c) If the bidder wishes to meet the required suitability requirements based on the capacity of another organization or person, Kbt. Article 67 (3) and a- 15 (1) of the Cr. on the basis of the proposal, the ESPD shall also be submitted from the capacity of the entity providing the capacity, in accordance with the modalities of - 3 (2) of the Cr.
d) 4. and Articles 6-7.
E) If the time power is in the Kbt. Article 69 (11)In accordance with paragraph 1, koezvetlenuel adds to the databases that justify the exclusion reasons, economic operators should also document the availability of those databases in the appropriate ESPD file, with the exceptions of the databases that are subject to verification of the reasons for exclusion. At the time, Kbt. Section 67 (4)on the basis of which the tenderer declares that he does not take into consideration the subcontracting subject to the exclusion criteria set out in the contract. The prosecution of Article 69 (4) to (7) proves that Articles 8, 10 and 12-16 of the Cr. -.
h) In the case of a variation listing procedure, the bidder must enclose with the offer the variation registration form submitted to the company and the certificate of its registration, which has been negotiated by the company [Kr. - 13]. If no listing procedure is in progress, a solemn declaration must be submitted. (I) For reasons of exclusion and suitability, Certificates issued prior to the commencement date may be retrieved (used) as long as the contents of the certificate or certificate contained therein are correct. The proofs mentioned in Chapter II may be pronounced in accordance with Chapter V if the economic operator, by means of a list of qualified tenderers, proves that he satisfies the requirements of the law governing the procurement of co. (1) (4).
Exclusion Causes Verification of Control Exclusion in Dogs: In Exhibit 1, the Examiner based on the ESPD examines the existence of exclusions, and in control control 2 the Kbt. Pursuant to Article 69 (4), the examination of certificates and declarations under the Cr. Clean the Kbt. 64. The final decision must be submitted at the same time as the ESPD. 2-7 BC.- a iranyado.
Time limit of the Kbt. Section 74 para. (1) letter b) excludes from the list of tenderers, subcontractors, or organizations certifying their suitability who reserve the Kbt. The grounds for exclusion specified in Article 62 (1) to (2) shall be adopted in the course of the procedure. The offer may be made in EUR, the contract shall be quoted in EUR to the purchaser and paid in EUR. Bucklethe offer or statements must be kept at the T attorney's office by the alairo person (s), or the alairas sample, countersigned by an alderman or chamber attorney. In the case of an offeror who is not established in Hungary and whose personal law does not recognize the alairim cimps, the person who is entitled to the name in the name of the offeror makes a solemn declarationto be entered.
3. The quotation does not need to indicate to the co-contractor the reset for which the Subcontractor (AT) is to be included or the known subclasses. Suggestions can only be made in Hungarian. All certificates and documents must be submitted in Hungarian at the time of the offer. AK is a translator of a document submitted in a language other than Hungarianalso accepts drink.
5. The proposal must be accompanied by a professional proposal describing the characteristics and properties of the rooms, from which it can be ascertained that the technical description complies in all respects. In order to prove the technical suitability, the proposer must indicate in his professional proposal the factory, the specific type designation and the place of origin. Koezoes time to time aYes. 35. AK does not make it possible to establish a business organization (project partnership) for the purposes of the contract. Opt. landscape. Kbt. Section 56. No consultation or on-site consultation. AK a Kbt. Section 81 (5) para. on the basis of the quotation of the quotes, the quotation of the quotes is done in a harsh way, only the best or most favorableone or more of the most favorable offerers do the misery. AK a Kbt. Section 71 (6) para.
10. The eligibility criteria specified in point III.1.3) and the manner in which they are required to be certified are more stringent in the official listing of qualified tenderers. - 30 (4) of the Cr. properly appalmazando.
11th K has 60 calendar days in the 2 months period mentioned in point IV.2.6. AK does not apply Kb. - 75 (2) para. (e). Hungarian law is iranyado.
14. The time limit is UTC 1 for the time limit.
15. Time-outs do not stand the test of time.
16. Non-keruel line framework test case, dynamic purchasing system, electronic application application. Supplement to Article II.1.6)To: It is not possible to make a specific offer because you are purchasing a small infrastructure that has a cell and its physical accessories, but cannot be selected due to compatibility issues. FAX: Dr. Zoltan Guba, please contact: 00631
Internet address (URL): http://www.uni-miskolc.hu

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Ajka-Local Energy Management Hungary 152591498 19 Nov 2026
Operation of Pantograph Control Equipment. Hungary 152439041 14 Dec 2026
Purchase of a Printing Press Hungary 152323244 19 Nov 2026
Main Technological Maintenance of Gt Power Plants Hungary 152283890 02 Dec 2026
Acquisition of Profession-Specific Training Tools Hungary 152267323 20 Nov 2026

Hungary Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Laboratory, optical and precision equipments (excl. glasses) was 05 Dec 2019. Bidding is closed.

This tender has been issued by MISKOLCI EGYETEM in Hungary.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 38000000 - Laboratory, optical and precision equipments (excl. glasses).

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 37753897. The purchaser document reference is 524986-2019.

See the Similar Tenders section on this page or browse other tenders from Hungary.

This tender falls under Technology and Equipment in Hungary. Suppliers in these sectors can track similar Hungary tenders using CPV-based alerts.