Expired Tender Portugal ICB TOT Ref. 33899516

Contract notice: Laboratory, optical and precision Tender - 33899516

Tender notice from Portugal, published on 17 Jun 2019.

Executive Summary

The INL — INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORY has issued a Tender notice for the procurement of a Contract notice: Laboratory, optical and precision equipments (excl. glasses) in the Portugal. This Tender notice was published on 17 Jun 2019 and is scheduled to close on 30 Jun 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 33899516, while the tender notice number is 279270-2019 and Register on the platform.

Key facts

Summary
Contract notice: Laboratory, optical and precision equipments (excl. glasses)
TOT Ref. No.
33899516
Document Ref. No.
279270-2019
Country
Portugal
Notice type
Tender
Competition
ICB
Publication date
17 Jun 2019
Bid deadline
30 Jun 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Laboratory, optical and precision equipments (excl. glasses)
Description: Contract notice: Laboratory, optical and precision equipments (excl. glasses)
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 38000000, 38000000, 38000000
CPV Description: Laboratory, optical and precision equipments (excl. glasses).
Standard Specifications to Govern the Contracts for the Supply and Installation of Nanofabrication and Microscopy Equipment and the Upgrades to Existing Nanofabrication Systems for INL
The subject matter of this contract is the supply and installation of nanofabrication and microscopy equipment and the upgrade to existing INL nanofabrication systems listed below and detailed in Schedule V attached to these standard specifications (from now on referred to as 'Specifications'). The equipment and upgrades to existing equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment.
General requirements:
This tender concerns the supply of a mask aligner to be used with 200 mm diameter wafers.
Technical requirements:
The new mask aligner should comply with the following requirements:
— the mask aligner should be a semi-automatic (wafers loaded by the operator) or fully automatic tool (wafers loaded and unloaded from a cassette),
— the mask aligner must be able to handle 200 mm diameter Si wafers with thicknesses of 750?m,
— the mask aligner should be able to write on the full surface of the si wafers,
— the mask aligner should be capable of performing exposures in several different modes including hard contact, soft contact, proximity (with adjustable distance between mask and wafer in 1?m steps) and vacuum contact,
— the mask aligner should be able to write features with dimensions down to 2?m (including lines, circles, ellipses, squares and rectangles) without shape distortions on the full wafer,
— the mask aligner should be capable of automatically aligning the mask blank with respect to the wafer using alignment marks defined in previous lithography and pattern transfer steps,
— the mask aligner should be capable of aligning a mask blank with respect to alignment marks in a wafer placed either on the top side or on the bottom side of the wafer. I.e., the tool should be capable of performing both top side alignment and bottom side alignment,
— the overlay accuracy between 2 layers exposed in the same tool should be equal or better than 1?m on the full wafer,
— the mask aligner should be capable of using mask blanks of 9 inch x 9 inch made of quartz or soda-lime glass,
— for compatibility with the masks currently available at INL, the mask aligner should be capable of handling mask blanks of 8 inch x 8 inch made of quartz or soda-lime, even if the exposure will not be made on the full wafer surface in this case,
— the mask aligner optics should be capable of resolving features down to 1?m,
— besides conventional ocular lens, the mask aligner should have a screen (ideally larger than 17 inch) displaying the images captured by the optics.
The system should be capable of capturing pictures.
Internet address (URL): www.inl.int

Documents

Tender Notice
Login to view

Similar tenders

Portugal Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Laboratory, optical and precision equipments (excl. glasses) was 30 Jun 2019. Bidding is closed.

This tender has been issued by INL — INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORY in Portugal.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 38000000 - Laboratory, optical and precision equipments (excl. glasses).

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 33899516. The purchaser document reference is 279270-2019.

See the Similar Tenders section on this page or browse other tenders from Portugal.

This tender falls under Technology and Equipment in Portugal. Suppliers in these sectors can track similar Portugal tenders using CPV-based alerts.