Contract notice: Laboratory, optical and precision Tender - 23258365
Tender notice from Poland, published on 14 May 2018.
Executive Summary
The POLITECHNIKA WROC?AWSKA has issued a Tender notice for the procurement of a Contract notice: Laboratory, optical and precision equipments (excl. glasses) in the Poland. This Tender notice was published on 14 May 2018 and is scheduled to close on 22 Jun 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 23258365, while the tender notice number is 202232-2018 and Register on the platform.
Key facts
Summary
Contract notice: Laboratory, optical and precision equipments (excl. glasses)
Object of the contract Laboratory, optical and precision equipments (excl. glasses) Description: Contract notice: Laboratory, optical and precision equipments (excl. glasses) Authority Type: Other Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 38000000, 38000000 CPV Description: Laboratory, optical and precision equipments (excl. Glasses). ZP / BZP / 178/2018-A set of auxiliary equipment for conducting tests in a laboratory of mineral engineering (small laboratory equipment and materials) Reference Number: ZP / BZP / 178/2018 The subject of the order is the delivery of equipment for the Laboratory of Earth Sciences and Mineral Engineering, as part of the project "Complex GEO-3EM Energy Ecology EdukA set of auxiliary equipment for conducting tests in a laboratory of mineral engineering (small laboratory equipment and materials). The subject of the orders includes: delivery to the place designated by the Ordering Party. CPV code: CPV code: 38000000-5 Laboratory, optical and precision equipment (from. Main Site: GEO-3EM building, Na Grobli 13 street, Wrocław. 1 subject of the order is delivery of equipmentLaboratory of Earth Sciences and Mineral Engineering, as part of the "GEO-3EM Energy Ecology Education Complex" A set of auxiliary equipment for conducting research in the laboratory of mineral engineering (small laboratory equipment and materials). 2. The subject of the orders includes: delivery to the place appointed by the Ordering Party. 3. A detailed description of the subject of the order can be found in Za.3 to OPEN OPZ. 4. The detailed scope of execution of the subject of the order can be found in the contract template, constituting Annex no. 2 SIWZ. 5. The offer must be unambiguous and comprehensive, i.e. cover the whole assortment of the order (all equipment) along with the necessary elements of the hardware infrastructure. The subject of the order must be complete with all components, parts and materials notto be started and used and must correspond to the content of the ToR. The offered subject of the order must meet the requirements of the Ordering Party. The Contractor at the stage of order completion, executes the subject of the order in accordance with the requirements of the Employer. 6. The contractor is obliged to submit together with the offer a detailed and unambiguous description of the subject of the order, the technical specification of the offeredparcels allowing compliance with the requirements of the Ordering Party to be properly completed and signed Annex 3 to the ToR (together with - Possible Information for Contractors). The Contractor is obliged to clearly identify the offered devices / elements / software, characterizing them by the appropriate indication (according to the order made by the Ordering Party - column Ofeby the Contractor) eg for a specific product, naming, type, model, version number, manufacturer's name and any other features necessary to uniquely identify it and demonstrate that the devices offered by him meet the requirements specified by the Employer by accurately and clearly describing the offered devices / elements / software or confirmation of the parameter offeredow in accordance and respectively with Annex 3 to the ToR. 7. The Contractor grants the Ordering Party a minimum of 24 month warranty period for a table rotameter assessed in the offer evaluation criterion. Details regarding the guarantee guarantee can be found in Appendix 4 to the contract (Appendix 2 to the ToR) 8. The delivered equipment must be brand new, non-core, free from legal and physical defects and will be compliant with the standards and in forcetechnical and operational requirements in force in Poland. The equipment and software provided to the Employer and the materials used in the assembly work will come directly from the manufacturer or from official distribution channels authorized by the producer and come from. Legal and official producer distribution channel. 9.The deadline for completion until 31/10/2018. Eno sooner than from 1.9.2018. The deadline depends on the completion of construction works. The ordering party with the contractor will determine the details. Schedule of the order's execution up to 15 calendar days counted from the date of signing the contract. 10. The subject of this agreement was co-financed from the European Regional Development Fund under the Regional Operational Program of the Voivodship D2014-2020 project: "GEO-3EM Energia Ekologia Edukacja" project, No. of the project: RPDS.01.01.00-02-0001 / 16. 11. Pursuant to Article 93 paragraph 1a of the Act on Public Procurement, the Employer - provides for the possibility of cancellation of this the tender procedure, if the funds come from the European Union budget and non-recoverable funds from the assistance provided by European Member States. Porozhe is referring to the Free Trade (EFTA), which the Employer intended to allocate to finance all or part of the order, he was not granted. 12. The Ordering Party will apply Art. 24aa uPzp, 1O Contractors may apply for the order, who: 1) are not subject to exclusion based on art. 24 section 1 points 12-23 and (additionally, the Contracting Authority foresees the exclusion of the Contractor) art. 24 sec. 5 points 1 and 8 uPzp, ie: 1.1. in relation to which the liquidation has been opened, the court approved in the restructuring proceedings is expected to satisfy the creditors by liquidation of its assets or the court ordered the liquidation of its assets pursuant to art. 332 section 1 of the Act of 15.5.2015. Restructuring law (ie Journal of Laws of 2017, item 1508, as amended) or whose bankruptcy was announced, with the exception of Wykoa person who, after the bankruptcy, has concluded an agreement approved by a valid court order, if the arrangement does not provide for the satisfaction of the creditors by liquidating the assets of the bankrupt, unless the court ordered the liquidation of his property pursuant to art. 366 para. 1 of the Act of 28 February 2003 on Bankruptcy Law (Journal of Laws of 2017, item 2344, as amended), 1.2. who violated tax liability obligations, fees or social security or health insurance premiums, which the Employer is able to demonstrate by means of appropriate evidence, except in the case referred to in paragraph 1 point 15, unless the Contractor has paid taxes, fees or social or health insurance contributions with interest or fines, or has entered into a binding agreement regarding the repayment of those due2) meet the conditions for participation in the proceedings regarding: 2.1. competences or entitlements to conduct a specific professional activity, if it results from separate provisions, the Employer does not set a specific condition in this respect.2.2 economic or financial situation The Employer does not set a specific condition in this respect.2.3. technical or professional ability The Contracting Authority does notis a specific condition in this respect. 2. The contractor may confirm the fulfillment of the conditions referred to in point 1.2) sub-point 2.3. of this chapter, where appropriate and in relation to a particular order, or a part thereof, rely on the technical or professional capacity or financial or economic situation of other entities, regardless of the legal nature of the mergerhis legal relationship with him. The Orderer informs at the same time that the "appropriate situation" referred to above will occur only if the Contractor, which relies on the ability or situation of other entities, proves to the Ordering Party that in fulfilling the order will have the necessary resources of these entities, in particular presenting the commitment of these entities to giving him back-The ordering party will assess whether the technical or professional capacities made available to the Contractor by other entities or their financial or economic situation, allow the contractor to demonstrate compliance with the conditions for participation in the procedure and will examine whether there is a ground of exclusion for that entity referred to in art. 24 sec. 1 pkt 13 22 and par. 5 points 1 and 8.If the technical or professional capacity or economic or financial situation of the entity providing resources does not confirm the Contractor's compliance with the conditions of exclusion or the entities are subject to exclusion, the Employer will request that the Contractor within the time specified by the Employer: 1. replaced this entity with another entity orentities or 2. undertook to personally perform the relevant part of the order, if it shows technical or professional capacity or financial or economic situation, referred to in point. 1.2) of section 2.3, respectively, of this chapter.3. The orderer may at any stage of the proceedings consider that the Contractor does not have the required capabilities if the involvement of technical resources orthe Contractor in other economic undertakings of the Contractor may have a negative impact on the implementation of the order.1. To confirm the fulfillment of the conditions for participation in the proceedings and - Cd .: no grounds for exclusion, the Contractor together with the offer should submit the following statements and documents valid as at the date of submitting bids: 1.1. Statement in the form of a single European documentthe collection hereinafter referred to as the EED made in accordance with the standard standard form specified in the executive regulation of the European Commission only in electronic form with a qualified electronic signature (according to Annex 4 to the ToR). The information contained in the EED is a preliminary confirmation that the Contractor is not subject to exclusion and meets the conditions for participation in the progressThe method of submitting the EAT has been specified by the Contracting Authority in chapter VI of the SETCPL 1.2. In the case of reliance on the resources of other entities referred to in art. 22a Pzp Ordering Party in order to assess whether the Contractor, relying on the abilities or situation of other entities - will have the necessary resources to the extent enabling the proper execution of the public order and the assessment whether the relationship between you and thethe contractor with these entities guarantees real access to their resources, the Ordering Party requests documents (in particular by presenting the commitment of these entities to provide him with the necessary resources for the needs of the order), which specify in particular: the scope of resources of another entity available to the Contractor, how to use the resources of another entity, by the Contractor, atcompleting the public order, scope and period of participation of another entity in the performance of the public contract.1.3. The contractor, who refers to the resources of other entities, referred to in art. 22a uPzp in order to demonstrate the absence of grounds for exclusion against them and fulfillment to the extent that they relate to their resources, conditions for participation in the proceedings shall submit to EID regarding thosesubjects.1.4 In the case of joint application by the Contractors, the EAT shall be submitted by each of the Contractors applying for the order. These documents confirm compliance with the conditions for participation in the procedure and no grounds for exclusion to the extent that each of the Contractors demonstrates compliance with the conditions for participation in the proceedings and no grounds for exclusion.2. Contractor within 3 daysfrom the date of posting on the website information referred to in art. 86 par. 3 uPzp, will provide the Employer with a declaration of belonging or non-affiliation to the same capital group as referred to in art. 24 sec. 1 point 23 of the Public Procurement Law With the submission of a statement, the Contractor may provide evidence that links with another Contractor do not lead to distortion of competition in the proceedingsuo ordering (in the case of joint application for contracting by Contractors, the declaration is submitted by each of the Contractors jointly applying for the order) 3. The ordering party before the contract is awarded, will call the Contractor whose offer has been rated the most, to submit in the designated, not shorter than 10 days, the current date as of the day of submitting the following declarations-or documents: In order to confirm the lack of grounds for exclusion of the Contractor in the circumstances referred to in art. 24 Employers requesting the following documents: 3.1information from the National Criminal Register in the scope specified in Article 24 paragraph 1 items 13.14 and 21 uPzp, issued not earlier than 6 months before the deadline for submitting bids 3.2.certificates of the competent head of the office treasureconfirming that the Contractor is not in arrears with payment of taxes issued not earlier than 3 months before the deadline for submission of bids or other document confirming that the Contractor has entered into an agreement with the competent tax authority regarding repayment of such receivables with possible interest or fines, in particular legally required exemption, deferralb spreading overdue payments into installments or suspending in full the decision of the competent authority 1. The contractor remains bound by the submitted offer for 60 days. The period of being bound by the offer starts as soon as the deadline for submission of tenders expires. 2. The offer must consist of: 2.1. documents and statements referred to in Chapter VI point 1 of the ToR 2.2. Contractor's tender form attachment No.-1 to SIWZ (with the indication of the password to access the EJF file); 2.3. demonstrating the reservation of information constituting a trade secret in accordance with point 7 of chapter XI (if applicable), 2.4. power of attorney in accordance with point 3 of Chapter XI of the ToR (if applicable). 2.5. The Ordering Party requests, together with the offer, that the Contractor should provide a description of the item offered, the technical specification of the offered apconditions allowing compliance with the Employer's requirements - Filled and signed Annex No. 3 to the Terms of Reference (together with any Information for Contractors) 3. Contractor within 3 days from the date of posting on the website the information referred to in Article 86 para. 3 uPzp, will provide the Employer with a declaration of belonging or non-affiliation to the same group of capitalwhich referred to in art. 24 sec. 1 point 23 of the Public Procurement Law Along with the submission of a statement, the Contractor may provide evidence that links with another Contractor do not lead to distortion of competition in the proceedings for the award of Orders (in the case of a joint application for a contract) by Contractors, the statement shall consist of each of the Contractors jointly applying for the order.) Form of the offer: 1.-the offer will be made in Polish in a written form, under pain of nullity, with the exception of EAT, which should be submitted only in electronic form with a qualified electronic signature, in accordance with Chapter VIA of the ToR. Internet address (URL): http://przetargi.pwr.edu.pl/ Directive: Classical Directive (2014/24/EU)
The bid deadline for Contract notice: Laboratory, optical and precision equipments (excl. glasses) was 22 Jun 2018. Bidding is closed.
This tender has been issued by POLITECHNIKA WROC?AWSKA in Poland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 38000000 - Laboratory, optical and precision equipments (excl. glasses).
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 23258365. The purchaser document reference is 202232-2018.