Contract notice: Instruments for measuring flow Tender - 36104936
Tender notice from Bulgaria, published on 06 Sep 2019.
Executive Summary
The ?????????? ??????????? — ????? has issued a Tender notice for the procurement of a Contract notice: Instruments for measuring flow, level and pressure of liquids and gases in the Bulgaria. This Tender notice was published on 06 Sep 2019 and is scheduled to close on 18 Oct 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 36104936, while the tender notice number is 419318-2019 and Register on the platform.
Key facts
Summary
Contract notice: Instruments for measuring flow, level and pressure of liquids and gases
Object of the contract Instruments for measuring flow, level and pressure of liquids and gases Description: Contract notice: Instruments for measuring flow, level and pressure of liquids and gases Authority Type: Body governed by public law Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: European Union Award criteria: Lowest price CPV code: 38420000, 38421000, 38423000, 38420000, 38421000, 38423000 CPV Description: Flow-measuring equipment Pressure-measuring equipment Delivery of a specialized fluid flow parameter measurement system with software for the needs of ... Continued in Section VI .3) "Additional Information". The subject of the contract is the supply of a specialized system for measuring the parameters of фsoftware flows for the needs of the Technical University of Sofia under project BG05M2OP001-1.001-0008 "National Center for Mechatronics and Clean Technologies", funded through the Operational Program "Science and Education for Intelligent Growth" 2014-2020 and includes the delivery of 1 specialized software system for measuring fluid flow parameters with software. SpecialistThe Fluid Flow Parameter Measurement System (PIV) is an intuitive measurement technique / system for measuring the parameters of 2 or 3 velocity components in different fluid flows. The delivered system must be new, unused, in original factory packages. Main Site: Franco warehouse of the contracting authority Sofia, Blvd. Cl. Ohridski "# 8 The order includes delivery ofspecialized software for measuring fluid flow parameters with software, including: 1. Laser power of at least 200 mJ at 15 Hz - 1 pc 2. SCMOS (CCD) camera of at least 5.5 MP, with 50mm f / 1.4 lenses and 527mm and 532mm filters and a high speed full cable and interface kit - 2 3. Optics with a continuously adjustable focal length of 250 to 4000 mm, 2 sets of lenses with f = -10 mm and f = -20 mm and angles 25 and 15 - 1 pc 4. Suspension for Scheimpflug cameras, including 3D PIV calibration kit, main brackets and 2-head rail mounting for 2 cameras - 2 5. Computer system for processing of fluid flow parameters with minimum technical parameters - 1 pc: Processor: minimum 2 (two) pieces installed: - architecture - 64-bit, -number of kernels - minimum 8, - number of threads - minimum 16, - base clock - minimum 2.1 GHz, - cache (built-in L3) - minimum 11 MB Memory: - installed memory - minimum 32 GB DDR4- 2666, - Hard Drives: Minimum 2 TB, 7200rpm, - SATA SSD Disk: Minimum 512 GB Operating System: Windows 10 64-bit Professional edition or equivalent Additional requirements: Spec includedAnalyzed software for processing fluid flow parameters, monitor: size - minimum 22 "; resolution - Full HD1920x1080. 6. High resolution synchronizer, including independent 8 channels and cables, with a time resolution of not less than 250 ps - 1 7. Aerosol generator - oil or water based, for the production of atomized fluid for PIV measurements with 3 bottles of fluid with not less than 500 ml - 1 pc 8. Guide Laser Hand, Including Optical Suspension and Laser Mount Holder - 1 pc 9. Laser Safety Goggles - 2 For each use in the text (together with all forms of membership, singular or plural) of a standard, specification, technical evaluation or technical approval, as well as a specific model, source, process, commercial make, patent, type, manufor proceedings within the meaning of Art. 48, para. 2 and Art. 49, para. 2 of the PPA should automatically be considered added "or equivalent (s)". Warranty period - minimum 12 months, starting from the date of signing the handover certificate certifying the delivery, installation and training with the system. the contractor has a warranty period of up to 30 calendar days from yesthe signed bilateral protocol of ascertainment, eliminates by its own forces and means all faults, discrepancies, failures, defects and / or deviations of the delivered system, respectively supplies spare parts and / or components, replaces defective parts and / or components with new ones. If it is impossible to perform these activities within 30 calendar days the contractor within 15 calendar daysprovides us with a contractor with a turntable of the same or similar class until the defect / damage is remedied, and the warranty period of the appliance in the process of repair / repair is extended by the period during which the repair / repair took place. The guarantee for repairs / attachments is 6 months from the date of the bilaterally signed protocol certifying the repairs / attachments.cool. The contracting authority's complaint message may be sent by fax, e-mail or regular mail. The Contractor is obliged to send his representative to the site for finding and identifying the damage / non-compliance within 5 calendar days after receiving the Client's claim message. During the visit, a statement of findings is drawn up in two identical copiesa, describing the type of malfunction / malfunction / mismatch / defect and / or deflection of the delivered system. University of Sofia under project BG05M2OP001-1.001-0008 "National Center for Mechatronics and Clean Technologies", funded through the Operational Program "Science and Education for Intelligent Systems"2014-2020 Participants will be disqualified if any of the grounds under Article 54, paragraph 1 of the PPL and Article 107 of the PPA (Article 55 of the PPA does not apply) exist, except explicitly The contracting authority will also remove from participation: - participants - related parties according to -2, item 45 of the PD of the PPA, - participants who in any way included somewhere in their tender outside the envelope " Etcbid price parameters "elements related to the bid price (or parts thereof), - bidder who submitted a technical proposal that does not meet the requirements of the technical specification and conditions of the contracting entity, - bidder who bid, higher than the maximum estimated value of the order, - a participant for whom there are barriers to participation in the communitytheir orders as provided for in Art. 3, item 8 of ZIFODRUPDRTLTDS, unless they have applied exceptions under Art. 4 of it, - a participant for whom the prohibitions under Art. 69, para. 1 and para. 2 of the CITAA, - a tenderer who, within the period specified in the invitation, refuses (if applicable) to extend the period of validity of the tender or if it submits a tender with a shorter period of validity. The circumstances under Art. 54, para. 1, items 1, 2 and 7 of the Public Procurement Act refer to the persons referred to in Art. 54, para. 2 of the Public Procurement Act in connection with Art. 40 of the PDAB. According to Art. 46 of the PPPOP the participants are obliged to notify the client in writing within 3 days from the occurrence of the circumstance under art. 54, para. 1, Art. 101, para. 11 of the PPL. According to Art. 67, para. 1 of the PPA, when submitting a tender, the participant declares the lack of grounds for removal by submittingnot OEDOP. It shall provide the relevant information required by the contracting entity and indicate the national databases containing the declared circumstances or the competent authorities which, under the law of the country in which the participant is established, are obliged to supply information. The contracting authority may require, at any time after the opening of the tenders, the submission of a tenderall or part of the documents proving the information specified in the EDES, where this is necessary for the lawful conduct of the procedure under Art. 67, para. 5 of the PPL. With the participation of a non-legal entity, Art. 59, para. 6 of the PPL. With the participation of subcontractors, Art. 66 of the PPL. With regard to the use of the capacity of third parties, the provisions of Art. 65 of the Public Procurement Act. Offers are submitted to the address Sofia, Blvd. Cl. 8 Ohridski Str., Technical University - Sofia, office 1317 - office management. Internet address (URL): www.tu-sofia.bg
The bid deadline for Contract notice: Instruments for measuring flow, level and pressure of liquids and gases was 18 Oct 2019. Bidding is closed.
This tender has been issued by ?????????? ??????????? — ????? in Bulgaria.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 38420000 - Instruments for measuring flow, level and pressure of liquids and gases, 38421000 - Flow-measuring equipment, 38423000 - Pressure-measuring equipment.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 36104936. The purchaser document reference is 419318-2019.