Contract notice: Installation services of steam Tender - 41900373
Tender notice from Hungary, published on 27 Mar 2020.
Executive Summary
The MVM PAKSI ATOMERŐMŰ ZÁRTKÖRŰEN MŰKÖDŐ RÉSZVÉNYTÁRSASÁG has issued a Tender notice for the procurement of a Contract notice: Installation services of steam generators, turbines, compressors and burners in the Hungary. This Tender notice was published on 27 Mar 2020 and is scheduled to close on 27 Apr 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 41900373, while the tender notice number is 149569-2020 and Register on the platform.
Key facts
Summary
Contract notice: Installation services of steam generators, turbines, compressors and burners
Object of the contract Installation services of steam generators, turbines, compressors and burners Description: Contract notice: Installation services of steam generators, turbines, compressors and burners Authority Type: Utilities entity Contact Nature: Services Procedure: Negotiated procedure Document: Contract notice Regulation: European Union, with participation by GPA countries Award criteria: The most economic tender CPV code: 51130000, 51130000, 51130000 CPV Description: Installation Services of Steam Generators, Turbines, Compressors and Burners Refurbishment of Steam Turbine Vacuum Flaps Ref. MVM Paks Nuclear Power Plant Co. Ltd. 850 pieces of steam steam and 10 pieces of steam steam turbine with eroded low pressure turbine 5th stage 30 September 2020: Upgrade of 214 unpowered turbine blades Up to 8/18/2018: Upgrade of 422 unpowered turbine blades 2021/11/30: 214 unpowered turbine blades Full line delivery allowed (104 3 sheets) Customer must re-calibrate allo pads in the Applied Workshop The pads are stellite-must be upgraded by plate welding to a minimum length of 310 mm from the blade edge. The blades in front of the blade must be welded with anti-erosion material 310 mm further away from the blade edge. should be welded. The blades on the front side of the blades are flattened on the left side (narrower part)elite overlay must be made (stellite overlay welded) In the course of the above repairs, the geometry of the original blade must be restored with the needles specified below. In the test line, the length of the paddle band is the work pieceshould be 108.1 0.2 / - 0.0 mm at refining. In the case of inadequate welding, up to a maximum of four repairs of the welding area is permitted. min. At 82 mm wide and the entire length of the raw material, the temperature of the raw material should not exceed 700 C. the edges of the tiles must be smooth and in line with the geometric dimensions of the edges and tension segments. In the course of upgrading the turbine base, a modality that can be ordered on a flat page, with documentation, is required to perform and document the activity. The Customer shall provide the same and unparalleled new turbine blades at the same time. later on, it`s an beepit104 turbine blades belonging to the space fit for one single unit. Shovel bandage thickness min. 5 6 mm, II. Blade band rotor axis direction deflection to pre-upgrade base (side deflection: twisted or offset): max. 0.6 mm, III. The blade length differs from the pre-upgrade baseest: / -0.5 mm, IV. Blade cushion wire bore center point differs from pre-upgrade base plate max. 0.5mm, V. The shovel profile I-IV. Non-controlled geometric profile deviation for pre-upgrade geometry up to max. 1 mm, VI. Blade deflection band tangential to position (forward / backward) to flap front: 0 / -1 mm.Turbine blades, upgraded to Technical Specifications, are considered geometrically compliant with successful size testing performed by the Applicant in its Self Testing Template. The Customer is entitled to carry out geometric verification of the low-pressure turbine rotor.the renewal documentation and the Customer`s inspection, acceptance and testing may be considered as vitiated, completed. economic operator, who is a member of Kbt. Section 62 para Preliminary justification: - Applicant for Co-Procurement Procedures shall certify suitability and disqualification as well as Specify Co-Procurement Technical Specification 321/2015. (X. 30.) (hereinafter: Government Decree 321/2015. (X. 30.)) In the application for recourse, theo reasons for not submitting a statement in the Single European Co-Procurement Document (hereinafter referred to as "ECD") and the person duly authorized to represent it, The statement contains a statement that the Kbt. According to - 69 (4)the certification of which certificates are authorized, which authority is entitled, and a statement of any data and statements required for the application of the database referred to in Article 69 (11), - to provide its capacities at its disposalorganization`s statement in EEKD by Kbt. Section 62 exclusions for lack of justification for failure. [PPA. - 67 (3)] - The candidate applying for the assignment must declare that he will not use the subcontract for which he has been excluded in accordance with - 62 for performance of the contract. [PPA. Article 67 (4)] Final certificate: - Resident established in HUNGARYof the order applying for the order, 321/2015. (X. 30.) of the Government of the Republic of Hungary (X. 30.) Government Decree 321/2015. (X. 30.) Government Decree No. 321/2015 on the application for recourse to settlements not established in HUNGARY (X. 30.) of the Government of the Republic of Hungary (X. 30.) to submit certificates and declarations pursuant to Article 10 (1) - (2), 15. (X. 30.) Government Decree No. 6/2015. (X. 30.) Government Decrees, Certificates and Documents under Articles 8 and 10 of the Government Decree may be submitted in plain masculine form. . Rule 62 excludes the grounds of exclusion, the power of time shall be governed by Act 321/2015. (X. 30.) Korm. Rendewill be dealt with in accordance with - 12. For exclusion reasons, consideration should be given to Resolution 321/2015. (X. 30.) Government Decree 1 Section 16. (X. 30.) of the Government of the Republic of Hungary (X. 30.), in the case of an ongoing variation registration procedure, the offer shall be accompanied by the variation registration application filed with the company and the certificate of its registration by the company.For further details on the ex-post certifications, see the Co-Procurement Document. (X. 30.) of the Government of the Republic of Hungary (X. 30.) and with the entry of the EEKD, in accordance with - 5 (1), with the provisions of Section IV. the detailed information in the file must be entered in advanceto verify that it meets the economic and pencil suitability requirements determined by the time scale. (X. 30.) (1) (b) of the Government Decree (X. 30.), the person applying for (koezoes) filing shall submit the relevant data in the EEKD. (X. 30.) of the Government of the Republic of Hungary (X. 30.)zarmazo Arbitrage must provide proof of eligibility in the EEKD. If the bills are not available in HUF, they are calculated in forint on the basis of the currency indicated by the person applying for the bid, and the bidding caller is required to post dailyat an official foreign exchange rate with the National Bank. (www.mnb.hu) A 321/2015. (X. 30.) In the case of Section 19 para. musta deed of attorney, which must specify who the co-op candidates are entitled to fill in the statements in the ECT. [PPA. Article 35 (2a)] The declaration of the candidates for the co-op application shall be made by the economic operator who has submitted the application for the co-op. 65th(7), any organization or individual may rely on the capacity of any body or person to have a legal relationship. The organization whose data is used by the applicant for the financial and pencil proof of suitability is the Civil Code. 6: 419th As provided in --, the bidder shall be liable for the power of bid for the performance In the ECR, applicants for the co-op application, as well as other organizations applying for certification, will submit a proposal or application to the economic operator applying for the application or application. other body partsabout the Kbt. In the case of an organization within the meaning of Article 65 (8), the candidate for recruitment must include the solicitor`s authority to submit the relevant documents to the representative of the organization at the time of filing declarations to be submitted electronically in the ECR. Article 65 (12) / Final certificate: the Kbt. Section 69 (4) and / or Section 69 (7), with reference to Section 321/2015.(X. 30.) Corporal rend. See also - 19 (1) (b) and - 19 (2). Providers: Additional Information: Kbt. - 56, insurance of competition: Kbt. Article 36 (1), trade secret: Kbt. - 44, ECR Decree - 11 (4), submission of documents: Kbt. Section 47 (2) - (3), the re-filing applicant may not file a faxand by e-mail, test drive: Kbt. Section 73 (4) - (5), Search for information and clarification: Kbt. Article 71 (1) - (10) If the applicant for recruitment involves a new economic entity within the scope of the hianypotlas and there would be a need for new hianypotlas in view of this economic entity, Variable entry: 321/2015. (X. 30.) Government Decree, - 13, Koezoes re-filing candidate: Kbt. Section 35, 2nd The Kbt. The data according to - 66 (6) (a) and (b) shall be provided in the application for registration. For Qualified Reviewers, Decree 321/2015. (X. 30.) Korm. Section 62Paragraph (1) (b) and the performance of the contractor. The referral draws the attention of qualified advisers to the fact that the suitability of economic and penzuegy in dogs, that is to say, in point III.1.2), is broadly defined, and that in terms of technical and professional aptitude, that is to say, in point III.1.3, Mass Testing Masses in accordance with Decree 321/2015. (X. 30.) of the Government of the Republic of Hungary (X. 30.). The timeline is Kbt. He does not apply the ineffectiveness reason under Section 75 (2) (e). Applicants for resourcing cannot claim half of their time due to resentation. 6. Applying for the file in the file applicationmust declare Kbt. 66 (2). 7. Interest: best value gold according to the following criteria: 1. Net quotation value, weighted: 95, inverted gold certificate. 2. Steam turbine upgrades for low pressure soccer pads reported in some months (minimum 15 months). weight: 5, useful tip. 8. The recommendation applies Kb. Section 87 paraltakat. 9th Kuelfoeld`s tax winner testimonial Kbt. - 136 (2) para. 10. Scheduled date for the secondment of the candidates for secondment: 6.0.2015 11. Scheduled date for contract exams: July 31, 2020 12. In matters not regulated in this document, the Koezversicz Document, the Kbt. i did vegrehajtas reThe provisions of the Civil Code, the Civil Code and the ECR Regulation are applicable. II.2.7) The initial time limit stated in point "Duration of the contract, framework agreement or dynamic purchasing system" may be modified for the procurement of the co-procurement procedure. Internet address (URL): http://www.atomeromu.hu
The bid deadline for Contract notice: Installation services of steam generators, turbines, compressors and burners was 27 Apr 2020. Bidding is closed.
This tender has been issued by MVM PAKSI ATOMERŐMŰ ZÁRTKÖRŰEN MŰKÖDŐ RÉSZVÉNYTÁRSASÁG in Hungary.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 51130000 - Installation services of steam generators, turbines, compressors and burners.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 41900373. The purchaser document reference is 149569-2020.
Browse other tenders from Hungary or search by relevant keywords and CPV classification.
This tender falls under Defence and Security in Hungary. Suppliers in these sectors can track similar Hungary tenders using CPV-based alerts.