Contract notice: Inkjet printers Tender in Switzerland - 26183593
Tender notice from Switzerland, published on 27 Aug 2018.
Executive Summary
The OFFICE FÉDÉRAL DES CONSTRUCTIONS ET DE LA LOGISTIQUE OFCL has issued a Tender notice for the procurement of a Contract notice: Inkjet printers in the Switzerland. This Tender notice was published on 27 Aug 2018 and is scheduled to close on 02 Oct 2018, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 26183593, while the tender notice number is 373647-2018 and Register on the platform.
Object of the contract Inkjet printers Description: Contract notice: Inkjet printers Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 30232150, 30232150, 30232110, 30192112, 30232150, 30232110, 30192112 CPV Description: Inkjet printers. Laser printers. Ink sources for printing machinery. (18155) 620 multifunctional color printer With this invitation to tender, the Federal Office of Building and Logistics (FOTL) wishes to acquire two multifunctional color printers for local use. Different accessories and consumables will be needed for their operation. Multifunction printersI will need to be preconfigured as needed. Multifunction portable color printer with battery, 2, 300 devices. Duration: 48 months after the entry into force of the contract (foreseen in Q1 2019). The proof of qualification listed here. -apres must be provided in their entirety and without restriction or modification at the same time as the offer, otherwise it will not beThe economic / financial capacity of the tenderer has the necessary economic / financial capacity to carry out the mandate. Certified extracts from the Commercial Register and the Register of Prosecutions not older than 3 months at the time the tenderer requests them or, for foreign tenderers, official documents from abroad-equivalents recently established. These supporting documents must be provided only on request, after the submission of the tender and before the contract is awarded. Cdq 02 (a) respect for the principles of the procedure The tenderer confirms that he and his subscribers the principles set out in the Confederation Procurement Conference (CA) form. (b) additional documentary evidenceon the issue of equal pay between men and women Bidders employing more than 50 persons and their 1-level subcontractors employing more than 50 persons must demonstrate respect for equal pay between women and men not only by signing the form, but also by proving that their salary practices have been verified. Cdq 03 Accepof the General Conditions (CG) of the Confederation - relating to the purchase of goods (September 2016 edition, September 2016). The above-mentioned GTC apply to the market subject to this invitation to tender with the modifications, supplements and derogations specified in Annex 9.3.3 of the tender specifications. Bidders who make other changesor additions are excluded from the procedure. Cdq 04 Acceptance of the draft contract The tenderer is prepared to accept without reserve the draft contract set out in Annex 4 to these tender specifications. Cdq 05 Interlocutor The tenderer has the a competent contact person (SPOC) in the event of escalation of market issues and who makes the decisions. Cdq 06 KnowledgeKey informants The tenderer undertakes to call upon key persons who are fluent in German (oral and written) and who are able to prepare and deliver the results and documentation in German. Cdq 07 Warranty The warranty period is 24 months for all items from their delivery. The warranty extends in particular to all defects of materialor manufacturing. It is up to the buyer to decide whether an item needs to be re-instated or replaced. In case of exchange, the defective product is replaced free of charge by a new product of the same kind, of the same quality and of the same type. If the product in question is no longer available at the time of the denunciation of the defect, the successful tenderer must provide an alternative model to thepproprie. The successful tenderer must replace and repair the products within 5 working days. All costs related to the warranty (in particular transportation, removal and assembly) are at his charge. Cdq 08 Test Equipment For quality control purposes, the bidder confirms that it has to provide free of charge, at the request of the contracting authority and within ae 14 days after receipt of this request, 4 test devices / samples, the configuration of which is in accordance with the specifications in the tender offer and deliver them to 4 different sites. Cdq 09 New models L' The successful tenderer shall communicate in time the replacement of the apparatus with new models (at least 3 months in advance, by registered letter or by e-mail towith read confirmation). The purchasing services check for each new model the technical requirements ... Partial offers are allowed. Conditions for countries which have not adhered to the WTO agreements: none. General Conditions: Performance according to the Conditions General Conditions (CG) of the Confederation on the Purchase of Goods (September 2016 edition, September 2016). Celthese can be consulted at www.bbl.admin.ch section documentation CG. The above mentioned GTC apply to the contract subject to this invitation to tender with the modifications, additions and derogations specified in Annex 9.3.3 of the tender specifications. Tenderers who make other modifications or additions to them are excluded from the procedure. Negotiations:-are reserved. The adjudicator does not engage in price negotiations. Tenderers may only change the prices indicated in their tender in special circumstances (for example where the requirements need to be clarified or clarified) and where the tenderer explicitly authorizes them in their invitation to participate in negotiations. No bargainingThe prices will not be taken. Tenderers are asked to offer their best price. Conditions governing the procedure: the awarding officer for public contracts for services in Switzerland only to tenderers who ensure compliance with the provisions on the protection of work and working conditions as well as equal pay between women and men. If the serviceIf it is performed abroad, the tenderer shall at least comply with the fundamental conventions of the International Labor Organization mentioned in Annex 2a to the PCO. The form for the Confederation Procurement Conference (CA) must be signed and attached to the offer. Other information: Acquisition will be subject to project status and availability.credit. The adjudicator reserves the right to accept or refuse all or part of the services provided as options. Indication of the remedies: according to art. 30 LMP, this publication may be attacked, within 20 days of its notification, at the Federal Administrative Court, PO Box, 9023 St. Gallen. The memory of recbear, to present in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his agent; A copy of this publication and the exhibits invoked as evidence will be attached, where available. Closing time for submission of tenders / remarks: remarks on the submission of tenders: place of deliverye the offer: according to section 1.2: a) for delivery to the reception of the OFCL's goods (by the tenderer himself or by courier): the tender must be submitted at the latest on the closing date indicated above, during the opening hours of the reception of goods (8:00 to 12:00 and 13:00 to 16:00) against acknowledgment of receipt of the OFCL; (b) delivery by post: the postal seal or juicea bar code of a officially recognized Swiss or foreign post office is determinative of the date of delivery (postage by an enterprise machine is not recognized as a postal seal); c) delivery of offer to a Swiss diplomatic or consular representation abroad: foreign tenderers may submit their tender no later than the date of delivery-above has a diplomatic or consular representation of Switzerland in their country, during opening hours, against a confirmation of receipt. They have the obligation to send this confirmation by fax (n fax according to figure 1.2) to the contracting authority. The tenderer must ensure in all cases that he has proof of delivery of the tender in time. The tenders submittedare late ... Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Inkjet printers was 02 Oct 2018. Bidding is closed.
This tender has been issued by OFFICE FÉDÉRAL DES CONSTRUCTIONS ET DE LA LOGISTIQUE OFCL in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 30232150 - Inkjet printers, 30232110 - Laser printers, 30192112 - Ink sources for printing machinery.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 26183593. The purchaser document reference is 373647-2018.
This tender falls under Computer Hardware and Software Services in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.