Expired Tender Switzerland ICB TOT Ref. 29881324

Contract notice: Hydraulic presses Tender in Switzerland - 29881324

Tender notice from Switzerland, published on 16 Jan 2019.

Executive Summary

The ARMASUISSE ACHATS ET COOPERATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Hydraulic presses in the Switzerland. This Tender notice was published on 16 Jan 2019 and is scheduled to close on 25 Feb 2019, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 29881324, while the tender notice number is 022802-2019 and Register on the platform.

Key facts

Summary
Contract notice: Hydraulic presses
TOT Ref. No.
29881324
Document Ref. No.
022802-2019
Country
Switzerland
Notice type
Tender
Competition
ICB
Publication date
16 Jan 2019
Bid deadline
25 Feb 2019
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Hydraulic presses
Description: Contract notice: Hydraulic presses
Authority Type: Ministry or any other national or federal authority
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: GPA
Award criteria: The most economic tender
CPV code: 42636100, 42636100
CPV Description: Hydraulic Presses.
Press for Pressing (Hydraulic Press)
The process of making punching corners uses a press for hydraulic pressing. The pressing press currently used by Swissmint dates from 1967. It no longer corresponds to the current state of the art and has considerable gaps in terms of safety at work. The timely replacement of the pThe sinking process must provide a safe and cost-effective solution in the long run.
Main Site: According to the documents
The process of making punching corners uses a press for hydraulic sinking. The pressing press currently used by Swissmint dates back to 1967. It no longer corresponds to the current state of the art and has considerable safety deficiencies.at work. The timely replacement of the press for embedding must provide a safe and economical long-term solution.
The proof and proof of fitness listed below must be provided in its entirety with the offer, without restrictions or modifications, otherwise he will not be involved in the offer.
a) excerpts from the
E10, the bidder certifies that all the factures will be sent electronically. Information on existing capabilities is available in Annex 1.4.
E11, the bidder certifies that it provides a minimum 24 months warranty on the press for press or the proposed press.
E12, the bidder certifies that it will provide a declaration of conformity for the press at the time of its delivery.
E13, the submissioThe contractor certifies that he accepts the public works contract (Annex 4.0).
E14, the tenderer certifies that he accepts the maintenance and repair contract (Annex 4.1).
E15, the ...
Partial offers do not apply. are not allowed.
Conditions for countries which have not acceded to the WTO Agreements: none.
Negotiations: remain reserved.
Conditions governing the procedure: the Contracting Authority adjudge of public markets for services in Switzerland only to contractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women.
Other information: according to documents. remedies: in accordance with Art. 30 LMP, the present publication can be attacked, in awithin 20 days of its notification to the Federal Administrative Court, PO Box, 9023 St. Gall. The appeal memorial, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his representative; will be attached a copy of this publication and the exhibits invoked as evidence, These are available.
Closing time for the submission of tenders / Remarks: Place of deposit: see point 1.2 Important for the respect of the deposit period:
a) in the event of delivery to Armasuisse: the following points must be at the reception (reception) of the administrative building of Armasuisse, Kasernenstrasse 19, 3003 Bern, to the attention of the WTO CC Armasuisse:
- hoursOpening hours of the lodge: 7:00 17:00 (offers can not be delivered outside of these hours),
- postponed until 4:00 pm on the deadline indicated above, with certificate of receipt issued by Armasuisse;
(b) postal courier: the postage stamp or bar code of the service provider making the shipment is determinative (the stamp date stamped by the undertaking(c) in the case of delivery to a diplomatic or consular representation of Switzerland: the certificate of receipt issued by the representation in question is authentic. The acknowledgment of receipt must be sent to the e-mail address indicated in 1.2 at the latest until the deadline for submission of the offer.
Remarks (Time limit for writing questions): ifquestions arise during the development of the offer, they can be posed exclusively in the form of anonymous questions in the Frequently Asked Questions of the site simap.ch. Each question must be asked separately in the forum (one question per entry).
The answers are given in the FAQs of the simap.ch website. All questions and answers can be viewed byall the tenderers who obtained the documentation for the call for tenders.
The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions.
National reference publication: SIMAP of 15.1.2019, doc. 1053119.
Deadline for questions in writing: 15.02.2019
File available from 15.1.2019
Conditions for obtaining tender documents: the documentation can be downloaded exclusively from the electronic platform www.simap.ch, heading. For this purpose, you must first register in the project in question and then you will be able to access the documentation by means of the Login and the password which you will receive by electronic mail. A forum isavailable for questions.
Internet address (URL): https://www.simap.ch

Documents

Tender Notice
Login to view

Similar tenders

Tender Country TOT Ref. No. Bid deadline
Ara Thurau, Gas Production Equipment Switzerland 152593367 29 Jan 2027
Ara Thurau, Trough Loading Station Including Troughs and Guide Rails Switzerland 152593341 29 Jan 2027
Ara Thurau, Sand and Grease Trapping Equipment Switzerland 152593339 29 Jan 2027
Ara Thurau, Phosphate Precipitation Switzerland 152593337 29 Jan 2027
Turntable (Plaque Tournante) Switzerland 152592589 22 Jan 2027

Switzerland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Hydraulic presses was 25 Feb 2019. Bidding is closed.

This tender has been issued by ARMASUISSE ACHATS ET COOPERATION CC WTO in Switzerland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 42636100 - Hydraulic presses.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 29881324. The purchaser document reference is 022802-2019.

See the Similar Tenders section on this page or browse other tenders from Switzerland.

This tender falls under Technology and Equipment in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.