Expired Tender Switzerland ICB TOT Ref. 12388403

Contract notice: Geological, geophysical and other Tender - 12388403

Tender notice from Switzerland, published on 12 Apr 2017.

Executive Summary

The armasuisse Einkauf und Kooperationen CC WTO has issued a Tender notice for the procurement of a Contract notice: Geological, geophysical and other scientific prospecting services in the Switzerland. This Tender notice was published on 12 Apr 2017 and is scheduled to close on 19 May 2017, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 12388403, while the tender notice number is 136265-2017 and Register on the platform.

Key facts

Summary
Contract notice: Geological, geophysical and other scientific prospecting services
TOT Ref. No.
12388403
Document Ref. No.
136265-2017
Country
Switzerland
Notice type
Tender
Competition
ICB
Publication date
12 Apr 2017
Bid deadline
19 May 2017
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Geological, geophysical and other scientific prospecting services
Description: Contract notice: Geological, geophysical and other scientific prospecting services
Authority Type: Ministry or any other national or federal authority
Contact Nature: Services
Procedure: Open procedure
Document: Contract notice
Regulation: GPA
Award criteria: The most economic tender
CPV code: 71351000, 71354000, 71353000, 71355000, 71351000, 71354000, 71353000, 71355000
CPV Description: Geological, geophysical and other scientific prospecting services.
Map-making services.
Surface surveying services.
Surveying services.
Swisstopo Projekt ZFP0215 Beschaffung LIDAR-Daten RE 2017/2018.
Ziel der Ausschreibung
NUTS Code : CH0
Main Site : Schweiz.
Ziel der Ausschreibung
Gegenstand und Ziel der vorliegenden Ausschreibung ist die Beschaffung von neuerfassten und klassifizierten LIDAR-DatIn the area of the implementation unit RE 2017/2018, derived DOM and DTM as well as the recorded LIDAR data in the full-wave form in the format LAZ 1.4 Cantons AI, AR, FL, SG, SH, SZ, TG, ZG, ZH, the Principality of Liechtenstein and a defined buffer zone. In order to achieve the highest possible accuracy, N the data are recorded for snow and foliage freedom.
For details and notes on flight operations: see tender documents
Suitability Criteria
The following suitability criteria must be fulfilled by the supplier. The manner of performance shall be demonstrated as required. If a suitability criterion is not met, the evaluation can not be considered(Not more than 3 months, the date of the entry date is the decisive date), which shows that no tax or social tax allowances are available.
E02Delivery of business declaration
Company portrait with organization chart. The ProdThe contractor confirms that he and his subcontractors and subcontractors who have been contracted and paid for services rendered and paid in Switzerland, as set out in Supplement 1.1.1, shall ensure that the contractor is in good working order Working conditions, occupational safety and healthAs well as the equality of wages of women and men.
Suppliers and their subcontractors with more than 50 employees each have to prove additionally how the wage practice has been checked. Further information can be found at www.logib.ch
In addition, the supplier confirms that he and his subcontractors and subcontractors who have been contracted and paid for abroad are paid and paidE Efficiency of the International Labor Organization as set out in Supplement 1.1.1.
E04
Overall responsibility for the present project
The contractor confirms to assume the overall responsibility for the present project, that is, In particular, that the supplier is the sole contractual partner of the agency. Allfaellig parties are with the themi?1/2(S) (subcontractors).
If a tendering company is offered, a consortium contract is to be concluded between the members and must be enclosed with the bid.
E05
Requirements of the aeronautical authorities
The supplier confirms that he and / or his so - called operator (s) ) As its SPO operator at its competent authority "CA"(EC) No 216/2008, in particular the provisions of Special Operations of Air Operations Regulation (EU) 965/2012, are fully complied with. This also applies to all possible and relevant changes and further developments of the relevant guidelines, The supplier also confirms that he has full responsibility for himself and his possible subcontractors and partner companies for the fulfillment and compliance with all current and future necessary and relevant aviation regulations.
In particular, the supplier also confirms that he / she is committed to doing so, For itself and its subcontractors all no(S) of the tendering procedure (s) to be carried out by the contractor in accordance with the procedure laid down in Article 4 (1) (e) That he is in the order(Eg single point of contact) for all business processes such as purchase order, payment transaction, and services. The supplier confirms that all correspondence, negotiations and documentation are to be conducted in the German or English language during the procedure The project management
the supplier(S) that the user has confirmed that the communication language is German, French or English during the project.
E10Spesen
The provider confirms that the customer is not compensated for any charges.
E11 Experience with processing and classification of Airborne LIDAR data Has extensive experience with the processing and classification of Airborne LIDAR data and the derivation of digital terrain and surface models in a similar topography as in this call for tenders.
Successfully completed Airborne LIDAR reference projects
with comparable complexity and topography according to the specifications and - with a surface area of the minimum total of
2'000 km2.
At least one reference project must be in a geWith an area of at least 500 km and a difference of at least 1 500 m.
The reference projects were completed and successfully completed in the period from 1.1.2011 until the offer period. Successfully concluded means that the last delivery of the processed data took place and was accepted and accepted by the customerExperience Orthophoto
The provider confirms that he has sufficient experience in the simultaneous recording of LIDAR data and digital aerial data and the production of orthophotos.
This experience is shown with 2 corresponding reference projects. If applicable, reference may also be made to references according to E11.
E13Experience Project Manager (m / f)
The provider confirms, (M / f)) who is responsible for the project as a whole for project and project related matters At least two Airborne LIDAR projects in hilly, mountainous and partly densely wooded areas(As for example Jura or in the Pre-Alps and Alps) and successfully completed from the start of the project until the delivery of the processed and classified data.
The relevant CV is to be enclosed as a proof and according to Annex 1.2 two successfully completed reference projects of the specified project manager M / f), where he / she takes the footThe reference projects each covered an area of at least 500 km and were completed and completed in the period from 1 January 2014 to the end of the offer period.
If the references of E11 already cover this requirement, it can be referred to The supplier confirms that he has a quality assurance system for his companyThe manufacturer confirms that the LIDAR sensor used for the detection of the laser points is of the last generation (year of manufacture Or the upgrade year not older than 2014) and has already been tested. The LIDAR sensor is full-wave type and is capable of registering at a minimum of four echoes.
E16Calibration of the LIDAR sensors
The supplier confirms that it provides the right-hand workshop calibration of its LIDAR sensors Laser scanner is to be performed in such a way that the accuracy requirements can be met. The calibration must be done at regular intervals(S) and mandatory after a long pause ( 1 month) of the system. The procedure shall be documented and documented at the request of the customer. The supplier confirms that, in the case of commissioning and taking account of the specifications, the data processed according to Supplement 2.0, section 2.4 will be delivered on an ongoing basisAnalysis
The supplier confirms that he has understood the scope and requirements of this tender and has taken it into account in his offer.
The contractor also provides a concept that clearly shows his understanding of the contract as he covers the area perimeter RE 2017/2018 Of approximately 7 "400 km2 and to process by 31st November 2018 and, (Scanner, aerial camera, software, etc.) including their intended use in the project in terms of the type and extent of the planned flight parameters,
About the planned flight scheduling and the duration of the data collection,
about its measures, if the L(See www.bazl.admin.ch/spo for Swiss soil).
5.for the personnel deployed,
6. as it is before (strategy) The technical equipment used, and the staff employed, the overall performance with regard to the relatively short time window, possibly a short winter season and possibly(Risk management), - about a realistic schedule that includes data collection, data processing and continuous data delivery, such as the quality (point density, Accuracy, classification) of the delivered data and products, (Eg air, water, etc.) at all stages of the process. The supplier shall certify compliance with national laws for all areas of environmental protection (air, water, etc.), in particular the quality control he has envisaged in the recording of data, processing and classification of the data Of the offerer
E20Vertragsentwurf
The supplier besta(E) The issuer confirms that his / her overall offer and the commissioning of his / her services, The Technical Specifications (Annex 2.0)
Partial offers are not allowed.
Conditions for non-WTO countries: none.
Negotiations: None. The supplier is obliged to submit his best offer.
Principle of the procedure: The client assigns public orders for services in Switzerland only to suppliers, who observe compliance with the occupational health and safety regulationsAnd the working conditions for employees as well as equal pay for men and women.
Appeal to the legal person: In accordance with Article 30 BoeB, a written complaint may be lodged with the Bundesverwaltungsgericht, Postfach, 9023 St. Gallen within 20 days of the opening date. The appeal must be submitted in duplicate and has the requestN, their reasoning with the statement of the evidence and the signature of the complainant or their representative. A copy of the present publication and existing evidence are to be enclosed.
Closing date / remarks: Submission date: cf point 1.2 To observe the entry deadline, the following must be observed: a) In case of delivery to armasuissei?1/2The following points are to be considered: Opening hours of the lodge: 7:00 17:00 h (no offer can be made outside of these times) The fee has to be paid by the latest at the latest Mentioned above, before 16.00 hours against the issue of a receipt of the armasuisse. B) When submitting aBy mail: The postmark or bar code document of the dispatch service provider (company stamps are not valid as postmark). (C) On presentation to a diplomatic or consular post of Switzerland: the receipt of the corresponding representation shall be decisive. The acknowledgment of receipt must be received by the deadline of the offer at the latest in accordance with section 1.2 genPlease send an e-mail address.
National reference publication: Simap dated 7 April 2017, doc. 949039.
Date for written questions until: 12.5.2017.
Conditions for obtaining the tender documents: Electronic platform www.simap.ch, section "Public procurement, bidding federation"I first register in the above-mentioned project and can then download the requested documents using the login and password, which you receive by e-mail. There is a questionnaire available
Internet address (URL): https://www.simap.ch
Directive: Classical Directive (2014/24/EU)

Documents

Tender Notice
Login to view

Similar tenders

Switzerland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Geological, geophysical and other scientific prospecting services was 19 May 2017. Bidding is closed.

This tender has been issued by armasuisse Einkauf und Kooperationen CC WTO in Switzerland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 71351000 - Geological, geophysical and other scientific prospecting services, 71354000 - Map-making services, 71353000 - Surface surveying services, 71355000 - Surveying services.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 12388403. The purchaser document reference is 136265-2017.

See the Similar Tenders section on this page or browse other tenders from Switzerland.

This tender falls under Construction and Real Estate in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.