Contract notice: Generating sets Tender in Poland - 25948243

Object of the contract
Generating sets with compression-ignition engines
Description: Contract notice: Generating sets with compression-ignition engines
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 31121100, 45100000, 45220000, 45310000, 45315300, 45315700, 71247000, 31121100, 45100000, 45220000, 45310000, 45315300, 45315700, 71247000
CPV Description: Generating sets with compression-ignition engines.
Electrical installation work.
Electricity supply installations.
Switching station installation work.
Supervision of building work.
Replacement of generator set, modernization of ATS in RGNN in the transformer station Jarosław 61 Hospital, cable connections nn and steering in the areaCOM at ul. 3 Maja 70 in Jarosław.
Reference Number: ZaP-154/18
The subject of the order is performance in the scope:
1. replacement of a generator set
Dobrano generator set dedicated for G3 class hospital receivers with a diesel engine in a silenced version for outdoor use. The unit should be equipped with a microprocessor control panel, adapted to start from the outsideexternal ATS system, automatic start, electronic voltage regulator, acoustic silencers, batteries, main switch, fuel tank with a capacity of min. 2 600 l in the frame, aggregate, anti-vibration pads, automatic air intakes and a chimney to discharge the exhaust. The designed unit in a muted housing will be installed outside on the designed foundation. The amount of fuel-in the internal tank should provide about 15 hours of uninterrupted operation with 80% fuel consumption approx. 159 l / h and 12 hours at the rated 100% fuel load of 200 l / h.
2. low voltage cable connections
A 4xYKXS 4x240 mm cable is provided from the generator set to the main switchboard RGnN of the section reserved in the "COM Jarosław" transformer station, the cable needsb own YKY 5x10 mm and control cable for AS type automatics YKSY 7x2, 5 mm.
3. powering the own needs of the generator set
The installation includes powering the own needs of the generator set. The power supply will be made from the main switchboard of the transformer station. The YKY 5x10 mm cable was designed along the route of the main power cables. In the RGNN switchgear a roRBK 00 connector with fuse links 32A WTN-00 / gG where the designed cable will be connected. Finish the ends of the cable with five-fingered heads
4. reconstruction of the low voltage cable connection supplying the oxygen tank
Existing low voltage power cable from the main switchboard of the internal building oxygen tanks due to collisions with the designed unit will be rebuilt. Cable type YAKY 4x 35 mm should be disconnected in the main switchboard in the internal building to dig out, put into a new route and enter the above switchgear including the same place. Disconnect the unnecessary cable length in the ground or cut off. Terminate the cable with a four-fingered head. Pass through the wall with a cable gland. At the intersection with existing underground utilities-place the cable in the protective tube A75, length 2m.
5. low voltage cable line supplying RGnNR switchgear to the transformer station
Supplying the RGnNR reserved switchgear of the "Jarosław 61" transformer station with the generator set is to be made with a cable made with 4xYKXS 4x240 mm quadruple cable.
The generator is protected with a switch in the generator setIn = 1600A. The output of the cables from the aggregate will be made through the designed well in the foundation under the hole in the bottom of the unit housing and then through the cable glands. Designed cable lines will be introduced into the existing main switch room of the transformer station with an existing cable channel.
6. reconstruction of the main switchgear of the transformer station
In the distribution rooma low voltage switchgear on the cable duct is equipped with a low voltage switchgear made in enclosures according to typical ZUR 75 solutions. The freestanding switchgear is made in the first protection class at the back, open with protective barriers. Switchgear supply from transformers is made of aluminum rails.
NAL-1 1250A circuit breakers are installed in the transformer field in the connection fieldka rails built-in OZK 1500 disconnector, in the reserved section there are contactors of the system, power generator set. The station is equipped with two 630kVA, 15 / 0.42kV Dy5 transformers. The reserved section is powered by a 350kVA current generator.
Existing NAL-1 circuit breakers and contactors of the reserved section and the ATS control system will be dismantled. In place of contactors in the reserved section of the agthe motorized regatta will be equipped with 2 pull-out circuit breakers 1 600 A of the SZR system with a mechanical blockade
1. In order to confirm the lack of grounds for exclusion from art. 24 sec. 1 and 24 sec. 5 point 1 and 8 of the Act on Public Procurement Law and compliance with the conditions for participation in the proceedings, the Bidder shall attach a statement valid as of the day of submitting offers in the form of a Single European Order Document, hereinafter referred to as: "JEDZ ", constituting Annex No. 6 to the ToR. Together with the document EAT the Contractor submits a potential power of attorney and Obligation regarding the entity referred to in Article 22a of the Public Procurement Law
On the basis of Article 24aa of the Public Procurement Law, the Ordering Party will first evaluate the offers and then will examine whether the Contractor, whose offer has been evaluated as the most advantageous, is not subject to exclusion.
2. Other.-statements and documents are submitted at the request of the Employer. The ordering party will call the Contractor, whose offer will be assessed at the highest to confirm the circumstances referred to in art. 25 ust. 1 point 3 of the PZP Act to submit the following documents:
1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 items 13, 14 and 21 of the Public Procurement Law, issued not earlier than 6-months before the deadline for submitting offers,
2) a certificate of the competent head of the tax office confirming that the Contractor is not in arrears with payment of taxes, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the Contractor has entered into an agreement with the competent tax authority regarding the repayment of these receivables along withany interest or fines, in particular obtained legally permitting, postponing or spreading overdue payments into installments or suspending in full the decision of the competent authority; - 3) certification of the relevant organizational unit of the Social Insurance Institution or Agricultural Social Insurance Fund or other document confirming that Contractore is in arrears with payment of social security or health insurance contributions, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the Contractor has entered into an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular the exemption, deferral or distribution provided for by lawno payment of overdue payments or suspension in full of the decision of the competent authority,
4) excerpt from the relevant register or from the Central Register and Information on Business, if separate provisions require entry in the register or records, to confirm the absence of grounds for exclusion under Article . 24 sec. 5 point 1 of the Public Procurement Law Act,
5) the Contractor's statement about lack of issuance of wobwhether he or she has a final judgment or a final administrative decision on default of taxes, fees or social security or health insurance premiums or in the event of such a decision or decision confirming the payment of such claims together with any interest or fines or a binding agreement on repayments those duei;
6) the Contractor's statement about the lack of a ruling against him as a preventive measure for the prohibition of applying for public orders; - 7) Contractor's statement on non-payment of taxes and local fees, referred to in the Act of 12.1.1991 on taxes and local fees (Journal of Laws of 2016, item 716).
3. If the Contractor is established or resides outside the territory of theof the Republic of Poland, instead of:
1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 items 13, 14 and 21 of the Public Procurement Law, issued not earlier than 6 months before the deadline for submission of bids in Section III. 1.2.
Cd. Section III 1.1 provides information from the relevant register or, in the absence of such a register, another equivalent document issued by the competent authorityan administrative or judicial instance of the country in which the Contractor has his registered office or place of residence or place of residence has a person who is concerned with information or a document, to the extent specified in art. 24 sec. 1 point 13, 14 and 21 of the Public Procurement Law issued not earlier than 6 months before the offer submission expired.
Instead of:
1) a certificate from the competent head of the tax office confirming that the Contractorca is not in arrears with paying taxes, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the Contractor has entered into an agreement with the competent tax authority regarding repayment of such receivables with possible interest or fines, in particular obtained the legally required exemption, postponing or spreading overdue installments into installmentsor 2) a certificate of the relevant local organizational unit of the Social Insurance Institution or the Agricultural Social Insurance Fund or other document confirming that the Contractor is not in arrears with payment of social security or health insurance contributions, issued not earlier than 3 months before the deadlineat the submission of bids, or other document confirming that the Contractor has entered into an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular obtained legally permissible, postponement or payment of overdue installments or suspension in full of the decision of the competent authority ;
3) copy from the relevant register or from Cof the Entry Register and Information on Economic Activity, if separate regulations require an entry in the register or records, in order to confirm the absence of grounds for exclusion under Art. 24 sec. 5 point 1 of the Public Procurement Law Act - - submits a document or documents issued in the country in which the Contractor has his registered office or place of residence, confirming that: a) he is not in arrears with paying taxes, payment, social security or health insurance contributions or that it has entered into an agreement with the competent authority regarding the repayment of such claims together with any interest or fines, in particular it has obtained the legally required exemption, deferral or installment payment of overdue payments or suspension of enforcement of the competent authority's decision in full not earlier than 3 months from ter(b) no liquidation has been opened or bankruptcy issued not earlier than 6 months before the offer submission has expired. If in the country in which has a registered office or place of residence or place of residence has the person the document refers to, the docs referred to in paragraph 3, they shall be replaced by a document. containing the Contractor's declaration, as appropriate, frome an indication of the person or persons authorized to represent it, or a statement of the person whose document. he had to refer, filed before a notary or before a judicial, administrative or professional self-government or economic authority competent for the seat or place of residence of the Contractor or the place of residence of that person issued within the time limit specified in paragraph 3.
1. Defined in Section IV.2.6. Announcements. Minimum period in which the bidder will be bound by the offer of 2 months = 60 days.
2. The ordering party requests a bid bond in the amount of 20, 000 PLN before the deadline for submission of tenders.
3. The Contracting Party requests from the Contractor, prior to the conclusion of the contract, a performance bond of 10% of the contract's gross value. In the case of submission by the Contractor dokumentu, ośw. In order to confirm the conditions of participation in the proceedings, from which amounts will be expressed in a currency other than PLN, the Employer will convert to PLN according to the average exchange rate of the National Bank of Poland on the day of publication of the contract notice in the Official Journal of the European Union. If the date of publication of the advertisement is Saturday or a day off from work, then as a course-currency conversion The Awarding Entity will accept the average exchange rate of the National Bank of Poland on the first business day following the date of publication of the contract notice in the Official Journal of the European Union.
5. Documents and statements confirming the absence of grounds for exclusion and fulfillment of the conditions for participation in the proceedings are submitted in the form provided for in the Regulation of the Minister of Development of 26.7.2016 inalmost the kind of documents that the Awarding Entity may request from the Contractor in the procurement procedure (Journal of Laws of 2016, item 1126). - Offer evaluation criteria: Price 60%, Deadline for execution 20%, Guarantee and warranty 20%.
Cd. II.2.4) The transformer and clutch section will be fitted with 1600 / 1250A circuit breakers where it is also planned to build a mechanical lock. Prodipped circuit breakers ATS with short-circuit capacity min. 50kA should be with motor drives with voltage triggers, overcurrent releases, should be able to work in temperature from minus 25oC to plus 70oC. In the transformer boxes, network analyzers have been designed connected to existing 1000 / 5A current transformers. Operate the field supplied from the generator setno network analyzer connected to designed 1000 / 5A current transformers. Network analyzers will be installed on the switchgear door. In place of the existing ATS, the ATS control system will be built based on a programmable controller that includes projected circuit breakers in the reserved section in the transformer field and the coupling field. On the elevation of the switchboard, upgrade the schemat and naming of sections and fields, and unnecessary holes to plug in.
7. replacement of the SZR system. The SZR switch is to provide the ability to manage three power sources plus two clutch switches, it has a graphic display with, among others, visualization of the state of executive elements, parameters of power lines, inputs and outputs. It has a double power supply, expandability with extension modules, prograflexible installation layout, integrated PLC logic. Switching times, limits and triggering priorities, alarms are fully programmable. the SZR controller can work in automatic and manual mode with full control of logic interlocks between individual power sources including clutch couplers. Characteristics of the ATS system: Graphic display with LCD backlight, 128 x 112 pixelsli, 4 levels of gray. Texts regarding measurements, settings and messages in 8 languages including Polish. 3 measuring inputs three-phase voltage with neutral conductor. Free configuration of source type (network or aggregate) and appropriate priority for all system configurations. Control of motorized circuit breakers or contactors. Control of aggregates with automatic test and emergency startyjnym. Control of phase-to-phase and / or phase voltages. Control of minimum voltage, maximum voltage, phase loss, asymmetry, minimum frequency, maximum frequency, with independent activation and delay of intervention. Voltage thresholds with programmable hysteresis.
100-240 VAC auxiliary power supply. Power supply from 12-24-48 VDC battery. Optical port for programming on the panelu
Internet address (URL): http://www.comjar.pl