Contract notice: Generating sets Tender in Poland - 24976888

Object of the contract
Generating sets with compression-ignition engines
Description: Contract notice: Generating sets with compression-ignition engines
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 31121100, 45100000, 45220000, 45310000, 45315300, 45315700, 71247000, 31121100, 45100000, 45220000, 45310000, 45315300, 45315700, 71247000
CPV Description: Generating sets with compression-ignition engines.
Electrical installation work.
Electricity supply installations.
Switching station installation work.
Supervision of building work.
Replacement of generator set, modernization of ATS in RGNN in the transformer station Jarosław 61 Hospital, cable connections nn and steering in the areaCOM at ul. 3 Maja 70 w Jarosławiu
Reference Number: ZaP-125/18
The subject of the orders is performance in the scope of:
Main Site: Jarosław, ul. May 3, 70
1. replacement of a generator set
Dobrano generator set dedicated for G3 class hospital receivers with a diesel engine in a silenced version for outdoor use. The aggregate should be equipped with a microprocessor control panelcapable of starting from external ATS system, automatic start, electronic voltage regulator, acoustic silencers, batteries, main switch, fuel tank with a capacity of min. 2600l in the frame, aggregate, anti-vibration pads, automatic air intakes and chimney for the discharge of exhaust gases. The designed unit in a muted housing will be installed outside on the projectionwhich is the foundation. The amount of fuel in the internal tank should ensure approx. 15 hours of uninterrupted operation at 80% of fuel consumption approx. 159l / h and 12 hours at the rated 100% load of fuel consumption 200l / h.
2. low-voltage cable connections
From the generator set to the RGnN main switchboard of the section reserved in the "COM Jarosław" transformer station, the cable is provided to youpu 4xYKXS 4x240 mm, YKY 5x10 mm self-supporting cable and control cable for ASSY type YKSY 7x2, 5 mm
3. powering the own needs of the generator set
The installation includes powering the own needs of the generator set. The power supply will be made from the main switchboard of the transformer station. The YKY 5x10 mm cable was designed along the route of the main power cables. In sizeRGNN district has been designed disconnector RBK 00 with fuse links 32A WTN-00 / gG where the designed cable will be turned on. Finish the ends of the cable with five-fingered heads
4. reconstruction of the low voltage cable connection supplying the oxygen tank
Existing low voltage cable from the main building's internal switchboard oxygen tanks due to collisions with the designThe aggregate will be rebuilt. Cable type YAKY 4x 35 mm should be disconnected in the main switchboard in the internal building to dig out, put into a new route and enter the above switchgear including the same place. Disconnect the unnecessary cable length in the ground or cut off. Terminate the cable with a four-fingered head. Pass through the wall with a cable gland. At the intersection with iscutting the underground utilities, lay the cable in the protective pipe A75 length 2m.
5. low voltage cable line supplying RGnNR switchgear to the transformer station
Power supply of the RGnNR reserved switchgear of the "Jarosław 61" transformer station from the generator set is to be made with a cable made of 4xYKXS 4x240mm four-core cable.It will be lit with the In = 1600A switch. The output of the cables from the aggregate will be made through the designed well in the foundation under the hole in the bottom of the unit housing and then through the cable glands. Designed cable lines will be introduced into the existing main switch room of the transformer station with an existing cable channel.
6. reconstruction of the transfo main switchboardIn the low voltage switchgear room on the cable duct, a low voltage switchgear is built in housings according to typical ZUR 75 solutions. The freestanding switchgear is made in the first protection class at the rear, open with protective barriers. The power supply of the switchgear from transformers is made of aluminum rails.
The transformer boxes are built-inNAL-1 1250A in the field of the bus coupler built-in OZK 1500 disconnector, in the reserved section there are contactors of the system, power generator set. The station is equipped with two 630kVA, 15 / 0.42kV Dy5 transformers. The reserved section is powered by a 350kVA current generator.
Existing NAL-1 circuit breakers and contactors of the reserved section and the ATS control system will be dismantled. In place ofIn the section reserved by the generator set, two displacement switches 1600A of the ATS with mechanical interlock will be built. In order to confirm the lack of grounds for exclusion from art. 24 sec. 1 and 24 sec. 5 point 1 and 8 of the Public Procurement Law and fulfillment of the conditions for participation in the proceedings, the Contractor shall attach to the offer a statement in the form of a Single European Document valid as at the date of submitting bidsu Order, hereinafter referred to as: "EAT", constituting Annex No. 6 to the ToR. Together with the document EAT the Contractor submits a possible power of attorney and Obligation regarding the entity referred to in Article 22a of the Public Procurement Law
Under Article 24aa of the Public Procurement Law, the Ordering Party first evaluate the offers and then examine whether the Contractor, whose offer has been evaluated as the most advantageous, is not subject to exclusion.
2. The other statements and documents listed below are submitted at the request of the Employer. The ordering party will call the Contractor, whose offer will be assessed at the highest to confirm the circumstances referred to in art. 25 ust. 1 point 3 of the PZP Act to submit the following documents:
1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 items 13, 14 and 21 of the Public Procurement Law, issued not earlier than 6 months before the deadline for submitting bids;
2) a certificate from the competent head of the tax office confirming that the Contractor is not in arrears with tax payment, issued not earlier than 3 months before the deadline for submission of bids, or other document confirming that the Contractor has concluded agreement with the relevant tax authority in the matter of repaymentt of these receivables together with any interest or fines, in particular obtained legally permissible, postponement or payment of overdue installments or suspension in full of the decision of the competent authority; - 3) certification of the relevant organizational unit of the Social Insurance Institution or the Agricultural Social Insurance Fund; another document afterclaiming that the Contractor is not in arrears with paying social security or health insurance contributions, issued no earlier than 3 months before the deadline for submission of bids, or other document confirming that the Contractor has agreed with the competent authority regarding repayment of such receivables with possible interest or fines, in particular he obtained the law provided for by lawresolving, postponing or spreading overdue payments in installments or suspending in full the decision of the competent authority;
4) excerpt from the relevant register or from the Central Register and Information on Business, if separate regulations require entry in the register or records, to confirm the lack of grounds exclusion pursuant to art. 24 sec. 5 point 1 of the Public Procurement Law,
5) declaredand the Contractor on the lack of issuing a final court judgment or final administrative decision on the payment of taxes, fees or social or health insurance premiums or in the event of issuing such a verdict or decision documents confirming the payment of these receivables with any interest or fines or conclusion binding agreement-on the repayment of these receivables; - 6) the Contractor's statement about the lack of a ruling against him as a preventive measure for not applying for public orders; - 7) Contractor's statement on non-payment of taxes and local fees, referred to in the Act of 12.1.1991 on taxes and local fees (Journal of Laws of 2016, item 716).
3. If the Contractor has a registered office or place withof residence outside the territory of the Republic of Poland, instead of:
1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 items 13, 14 and 21 of the Public Procurement Law, issued not earlier than 6 months before the deadline for submission of tenders continued in Section III. 1.2.
Cd. Section III 1.1 provides information from the relevant register or, in the absence of such a register, another equivalent document issued by a competent judicial or administrative body of the country in which the Contractor has his registered office or place of residence or place of residence has a person who concerns information or a document, to the extent specified in art. 24 sec. 1 points 13, 14 and 21 of the Public Procurement Law issued not earlier than 6 months before the offer submission expired.
Instead of:
1) certificate from the competent head of the tax officeconfirming that the Contractor is not in arrears with paying taxes, issued not earlier than 3 months before the deadline for submitting bids, or other document confirming that the Contractor has entered into an agreement with the competent tax authority regarding repayment of such receivables with possible interest or fines, in particular obtained the legally required exemption, postponement orsplitting overdue payments into installments or suspending in full the decision of the competent authority; - 2) certification of the relevant organizational unit of the Social Insurance Institution or Agricultural Social Insurance Fund or other document confirming that the Contractor is not in arrears with paying social security or health insurance contributions earlier than3 months before the deadline for submission of bids, or other document confirming that the Contractor has made an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular obtained legally permissible, postponement or installment payment of overdue payments or suspension in full implementation of the decision of the competent authority;
3) copyu from the relevant register or from the Central Register and Information on Economic Activity, if separate regulations require an entry in the register or records, in order to confirm the absence of grounds for exclusion pursuant to art. 24 sec. 5 point 1 of the Public Procurement Law Act - - submits a document or documents issued in the country in which the Contractor has his registered office or place of residence, confirming respectively that: a) nohe is in default of paying taxes, fees, social security or health insurance contributions or has entered into an agreement with the competent authority regarding repayment of such receivables with possible interest or fines, in particular he obtained the legally required exemption, postponement or installment payment of overdue payments or suspension in full implementation of the decision of the competent authority issued noearlier than 3 months from the deadline for submitting bids,
b) its liquidation has not been opened or bankruptcy issued not earlier than 6 months before the offer submission has expired.
4. If in the country in which has a registered office or place of residence or place of residence has the person the document refers to, the docs referred to in paragraph 3, they shall be replaced by a document. containing respondersa statement from the Contractor, indicating the person or persons authorized to represent it, or a statement from the person whose document. was to concern, filed before a notary or before a judicial, administrative or professional self-regulatory or economic authority competent for the seat or place of residence of the Contractor or the place of residence of that person issued within the periodeLipped in accordance with paragraph 3.
Minimum level of possibly required standards:
1. Specified in Section IV.2.6. Announcements. Minimum period in which the bidder will be bound by the offer of 2 months = 60 days.
2. The ordering party requests a deposit of PLN 20, 000 before the deadline for submission of tenders.
3. The Contracting Party requests from the Contractor before the conclusion of the contract to secure the proper performance of the contract-in the amount of 10% of the gross value of the contract.
4. In the case of submitting a document by the Contractor, In order to confirm the conditions of participation in the proceedings, from which amounts will be expressed in a currency other than PLN, the Employer will convert to PLN according to the average exchange rate of the National Bank of Poland on the day of publication of the contract notice in the Official Journal of the European Union. If daysThe publication of the advertisement will be a Saturday or a day off from work, then as a currency conversion rate, the Employer will accept the average exchange rate of the National Bank of Poland on the first business day following the date of publication of the contract notice in the Official Journal of the European Union. Documents and statements confirming no grounds for exclusion and fulfillment of the conditions for participation in the proceedings of the submissionse are in the form provided for in the Regulation of the Minister of Development of 26.7.2016 on the types of documents that the Employer may request from the Contractor in the proceedings for granting the order (Journal of Laws of 2016 item 1126). Offer evaluation criteria: Price 60 %, Deadline for ordering 20%, Guarantee and warranty 20%.
Cd. II.2.4) Disconnectors will be installed in the transformer boxes and the coupling sectionniki 1600 / 1250A where it is also planned to build a mechanical lock. Designed circuit breakers ATS with short-circuit capacity min. 50kA should be with motor drives with voltage triggers, overcurrent releases, should be able to work in temperature from minus 25C to plus 70C. In the transformer boxes, network analyzers connected to existing gearboxes have been designedcurrent indicators 1000 / 5A. The field analyzer connected to the designed 1000 / 5A current transformers was designed in the field supplied from the generator set. Network analyzers will be installed on the switchgear door. In place of the existing ATS, the ATS control system will be built based on a programmable controller including the control of the designed circuit breakers in the section reserved in the fieldh transformer and clutch field. On the elevation of the switchboard, update the diagram and naming of sections and fields, and unnecessary holes should be plugged in.
7. replacement of the SZR system. The SZR switch is to provide the ability to manage three power sources plus two clutch switches, it has a graphic display with, among others, visualization of the state of executive elements, parameters of power lines, inputs and outputsSC. It has a double power supply, expandable expansion modules, programmable installation system, integrated PLC logic. Switching times, limits and triggering priorities, alarms are fully programmable. the SZR controller can work in automatic and manual mode with full control of logic interlocks between individual power sources including clutch couplers. characIT chip layout: Graphic display with LCD backlight, 128 x 112 pixels, 4 gray levels. Texts regarding measurements, settings and messages in 8 languages including Polish. 3 measuring inputs three-phase voltage with neutral conductor. Free configuration of source type (network or aggregate) and appropriate priority for all system configurations. Control of motorized circuit breakers or-contactors. Control of aggregates with automatic test and emergency start. Control of phase-to-phase and / or phase voltages. Control of minimum voltage, maximum voltage, phase loss, asymmetry, minimum frequency, maximum frequency, with independent activation and delay of intervention. Voltage thresholds with programmable hysteresis.
100-240 VAC auxiliary power supply. Power supply from 12-24-48 VDC battery. Optical port for programming on the panel
Internet address (URL): http://www.comjar.pl