Contract notice: Forestry and logging products Tender - 42572029
Tender notice from Switzerland, published on 30 Apr 2020.
Executive Summary
The ARMASUISSE ACHATS ET COOPERATION CC WTO has issued a Tender notice for the procurement of a Contract notice: Forestry and logging products in the Switzerland. This Tender notice was published on 30 Apr 2020 and is scheduled to close on 09 Jun 2020, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 42572029, while the tender notice number is 203373-2020 and Register on the platform.
Object of the contract Forestry and logging products Description: Contract notice: Forestry and logging products Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 03400000, 03400000, 03419000, 03410000, 03400000, 03419000, 03410000 CPV Description: Forestry and logging products. Timber. Wood. Acquisition of wood pellets The Army Logistics Base (BLA), in collaboration with the Federal Office of Buildings and Logistics (OFCL), is responsible for the operation and maintenance of buildings (eg heating of buildings) on behalf of the Swiss Confederation. In order to guarantee the availability of wood pellets comme fuel for the installations used throughout Switzerland, the needs for wood pellets must be the subject of a public call for tenders for the coming years. Geographic lot 1 Othmarsingen. Evidence and proof of suitability listed below must be provided in full with the offer, without restrictions or modifications, otherwise it will not be entered intoon the offer. CAP1, extract from the prosecution register and the commercial register or equivalent official act issued by a foreign authority which certifies that the tenderer has no tax debts or related to unpaid social contributions (no more older than 3 months, the date of submission of the offer being decisive). CAP2, a) compliance with the principles governing the procedure The tendererre certifies that he and the third parties he solicits (subcontractors and suppliers) comply with the conditions governing the procedure in accordance with the document (annex 1.1.1) of the Confederation of Purchasing Conference (CA); b ) additional proof of respect for equal pay for women and men. Bidders and their first-rate subcontractors, each of which countsmore than 50 collaborators must demonstrate, beyond the document, how they examined their salary practice and that the tolerance threshold of 5% is respected within the framework of the market. CAP3, declaration of the tenderer. CAP4, the tenderer agrees, if awarded, to submit to the procedure for safeguarding secrecy in accordance with the order concerning the procedurefollow when entering into contracts, the content of which is classified from a military point of view (art. 6 and art. 7, Ordinance concerning the safeguarding of secrecy, RS 510.413). CAP5, the tenderer certifies that he assumes overall responsibility, i.e. in particular that the tenderer is the sole contractual partner of the adjudicating body. Any people involved mustnt be indicated in Annex 1.1 with the roles and functions assigned to them. CAP6, the tenderer certifies that he has sufficient experience in the production and delivery of wood pellets, in accordance with the specifications and instructions in Specifications. The tenderer must indicate at least 3 references for which he has provided services.ns comparable since 2015. CAP7, the tenderer certifies that he will provide technical assistance throughout Switzerland during office hours, Monday to Friday from 7:00 to 17:00 by telephone and, if necessary, on site and that it will regularly inform about new products and standards in force. CAP8, the tenderer certifies that he is able to deliver the quantities required (see aAnnex 1.4) to the delivery addresses defined in Switzerland within 5 working days of receipt of the order. CAP9, the tenderer certifies that he has the resources required to produce and deliver the required annual quantities of granules of wood (see annex 1.4). CAP10, the tenderer certifies that he has, at the time of submission of the offer, a certificate of assUrance for bodily injury and material damage (to installations and buildings) with a minimum cover of CHF 10, 000, 000.00 per claim. CAP11, E11, The tenderer confirms that he complies with standard SN EN ISO 17225-2 (Biogene Festbrennstoffe - Brennstoffspezifikation und Klassen - Teil 2: Klassifizierung von Holzpellets), which is anchored in the Swiss Protection Ordinanceof air (OPA). CAP12, the tenderer certifies that the heat used to dry the wood fuels comes from renewable energies (including solid biomass, thermal solar energy), from the residual heat of a power station of cogeneration of biogas, sewage gas or landfill gas, or industrial waste heat. In addition, the tenderer is required to demonstrate the gefficient estimation of the drying energy used. CAP13, the tenderer certifies that the wood used comes from sustainably managed sources and / or recycled wood materials. a) the tenderer certifies that the wood used meets the conditions in means of credible supporting documents specifying the information. For recycled wood: information provided by the tenderer regarding the pproportion of recycled wood with indication of source (supplier); or: b) the tenderer certifies that the wood used fulfills the conditions by means of credible supporting documents specifying the information. The accepted supporting documents are as follows: FSC / PEFC / HSH certificates, European Ecolabel and other supporting documents (equivalent). For recycled wood: information provided by the tendererarea as to the proportion of recycled wood with indication of the source (supplier). CAP14, the tenderer confirms that he has a valid quality management system according to ISO 9001 or equivalent. CAP15, the tenderer certifies that he accepts without reserve the model contract according to appendix 4.0. CAP16, the tenderer certifies that he accepts the general conditions of la Confederation: - CG relating to the purchase of goods (edition: Sept. 2016, state: Sept. 2016), - CG relating to the purchase of services (edition: Sep. 2016, state: Sept. 2016) . Partial offers are allowed. Conditions for countries which have not acceded to the WTO agreements: none. Negotiations: remain reserved. Conditions governing the procedure: The adjudicating contracting authorityfor services in Switzerland only to contractors who guarantee compliance with the provisions on worker protection, working conditions and equal pay for men and women. Other information: according to the documents. Indication of remedies : in accordance with art. 30 LMP, this publication may be challenged, within 20 days fromafter notification, to the federal administrative court, PO Box, 9023 St. Gall. The appeal brief, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant or his agent; A copy of this publication will be attached to it, and the exhibits cited as evidence, when available Closing deadline for the submission of offers / remarks: place of deposit: see figure 1.2 Important for the respect of the deadline of deposit: a) in case of deposit by hand in armasuisse (Guisanplatz administrative center 1): when handing over to, Guisanplatz 1, 3003 Berne, for the attention of CC WTO armasuisse, the following points must be observed: - the tenderer must announce himself to the lomain age, Guisanplatz 1, indicating the title of the project (cf. figure 7.1). It will then be redirected to , - the delivery must be made no later than 3.30 p.m. on the day of the delivery date mentioned in point 7.3, against delivery of an acknowledgment of receipt by Ramp Management, - opening hours of the ramp management: 8: 30-16: 00 (outside these hours, no offer can be madebe delivered); b) shipping by post: the postage stamp or barcode of the service provider carrying out the shipment is decisive (the date of the stamp affixed by the company is not authentic); c) in case delivery to a diplomatic or consular representation of Switzerland: the certificate of receipt issued by the representation in question prevails. The certificate of receipt must be esent to the electronic address indicated in section 1.2 at the latest until the deadline for submission of the offer. Remarks (deadline for asking questions in writing): if questions appear during the preparation ``, they can be asked exclusively in the form of anonymous questions in the frequently asked questions on the simap.ch site. Each question must be asked separatelyment in the forum (one question per entry). The answers are given in the frequently asked questions on the simap.ch website. All questions and answers can be viewed by all the bidders who have obtained the documentation for the call for tenders. The tenderer is responsible for finding out about any questions and answers in the frequently asked questionss. National reference publication: SIMAP of 04.28.2020, doc. 1130355. Delai wishes to ask questions in writing: 2.6.2020. File available from 28.4.2020. Conditions for obtaining the tender dossier: the documentation can be downloaded exclusively from the platform electronic form www.simap.ch section. To do this, you must first registerr in the project in question and you can then access the documentation using the Login and password that you will receive by email. A forum is available for questions. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Forestry and logging products was 09 Jun 2020. Bidding is closed.
This tender has been issued by ARMASUISSE ACHATS ET COOPERATION CC WTO in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 03400000 - Forestry and logging products, 03419000 - Timber, 03410000 - Wood.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 42572029. The purchaser document reference is 203373-2020.