Expired Tender Poland ICB TOT Ref. 26908433

Contract notice: Film equipment Tender in Poland - 26908433

Tender notice from Poland, published on 19 Sep 2018.

Executive Summary

The WYTWÓRNIA FILMÓW DOKUMENTALNYCH I FABULARNYCH has issued a Tender notice for the procurement of a Contract notice: Film equipment in the Poland. This Tender notice was published on 19 Sep 2018 and is scheduled to close on 31 Oct 2018, with an estimated Tender value of Refer Document. Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 26908433, while the tender notice number is 407564-2018 and Register on the platform.

Key facts

Summary
Contract notice: Film equipment
TOT Ref. No.
26908433
Document Ref. No.
407564-2018
Country
Poland
Notice type
Tender
Competition
ICB
Publication date
19 Sep 2018
Bid deadline
31 Oct 2018
EMD
Refer Document
Tender value
Refer Document
Purchaser ownership
-
Financier
Self Financed

CPV classification

Purchaser details

Purchaser contact is for registered users

Login to see details

Tender details

Object of the contract
Film equipment
Description: Contract notice: Film equipment
Authority Type: Other
Contact Nature: Supplies
Procedure: Open procedure
Document: Contract notice
Regulation: European Union
Award criteria: The most economic tender
CPV code: 32321100, 32321100, 32321100
CPV Description: Film equipment.
Delivery and installation of the film scanner and upgrade of the Arriscan
Reference Number: 09 / ZPP / 2018
subject of the order includes delivery and installation of a new film scanner and modernization of the Arriscan scanner possessed by the Ordering Party, in accordance with the technical requirements listed in Annex 1 to SIWZ. The order has been divided into the following parts:
Main Site: Wytw-rnia Filmow Dokumentalnych i Fabularnych w Warszawie, ul. Chełmska 21, 00-724 Warsaw, POLAND
A scanner for films with a minimum scanning resolution of 6K (5460 x 4148), 4K (4096 x 3112) and 2K (2048 x 1556) equipped with a wet head allowing effective removal of scratches from the film in during the scan ("wet gate"). The important parameters for the Employer are: supported forfilm tape mats: N35 (academy) and S35 for 2, 3, 4 perforations, 16 mm and super 16 mm, positive and negative with perforation, on the basis of acetate, polyester and nitrate; a digital image transducer with a native 6K pixel pitch (pixel pitch) not worse than 4, 125 μm; the scanner must provide a technological scanning resolution of at least 6K (5460 x 4148), LED lighting (R, G, B, IR) with temperature stabilizationcolor ury; optics with "autofocus" and scanning area setting, scan resolution in the range of at least HD up to 6K, redundant scanning within the entire width of the film without losing information visible on the film plus visible perforation. For 35 mm film, the minimum is 28 x 21.5 mm, the possibility of film rolls up to 600 m long, scanning speed (standard head);wick) 6K and 4K for 35 mm AXT HDR film not less than 2.2 frames / sec; operation in the mechanical and optical stabilization mode of the tape position (guidance) that does not cause damage to the perforation and surface of the film; AXT HDR (Dual Gain) mode for scanning contrasting film materials; RAW output files in a linear standard, logarithmic for negative and positive, with user's LUT filter; gbit depth of the image file saved from the scanner: - 10 bit for Cineon format, - 10 bit and 16 bit for DPX format, - 16 bit for TIFF format; conveyor belt digitally controlled safe for tape with reduced strength, also flammable on the nitro substrate, which does not damage it; the ability to scan a film with shrinkage exceeding 3.5%; the ability to scan a movie with damaged perforation or its large losses; tape travel indicated with the use of toothed wheels (perforation) and smooth (capstan drive); adjusting the speed and acceleration of the tape movement to the technical condition and strength of the film; controlling the scanner using the GUI graphical interface locally and remotely (network) from the workstation; remote control of the system should allow at least: editing withscanner (job editor), scanner calibration: sharpness, gray balance, ground calibration, preview of the scan and alpha channel in low and high resolution during scanning, change of scan parameters, scanning control by. EDL by Time Code and Key Code, file management with scanned material; network connection with SAN memory with FC connection, indicated BrightClip protocol support. The ordering party has the SAN memory of Bright Technologies (www.4Bright.com); NAS 1GbE and 10 GbE network connection; improving the quality of the scanned image should: - use infrared scanning technology (in relation to color films) that works during scanning and is designed to detect and remove dirt in the form of dust and dirt. It also creates a picture of impurities (kalpha) for use in image reconstruction programs. - run parallel to the scanning process (in real time). - stabilize the image electronically during scanning; Wet scanning: wet scanning - for removing scratches from the image using an immersion liquid that is harmless to the film and film emulsion Scanning and decoding the sound: scanner shouldn be equipped with a 16 mm and 35 mm film sound system that works on the basis of sound image scans. A separate device may be used for this purpose. - audio track with variable location and different optical density - is to have software for reading sound from scanned image (graphic files) of film soundtrack 16 and 35 mm. - processing of soundsThe frequency is to be in real time. Other inf. have been included in the SIWZ Appendix No. 1 Technical requirements
Contractors who are: 1) not subject to exclusion, 2) meet the conditions for participation in the procedure, specified in the contract notice and this Specification of Essential Terms of Contracts, may apply for this order.
In order to demonstrate the absence of grounds for exclusionand from the proceedings for the award of a contract based on the circumstances referred to in Article 24 sec. 1 and 5 of the Public Procurement Law, upon request of the Awarding Entity, under the pain of exclusion from the proceedings, submit the following statements and documents in the time specified by the Contracting Authority: 1) information from the National Criminal Register in the scope specified in art. 24 sec. 1 points 13 and 14 of the PPL Act (for a person), issued bynot earlier than 6 months before the deadline for submission of tenders, 2) information from the National Criminal Register in the scope specified in art. 24 sec. 1 point 21 of the Public Procurement Law (for a collective entity), issued not earlier than 6 months before the deadline for submission of tenders, 3) declaration of the Contractor about belonging to or lack of belonging to the same capital group, 4) extract from the competentregister or from central records and business information, if separate regulations require an entry in the register or records, in order to confirm the absence of grounds for exclusion under Art. 24 sec. 5 point 1 of the Act, 5) declaration of the Contractor about the lack of issuing a final court judgment or final administrative decision on default of taxes, fees or feesb social or health insurance premiums or, in the event of issuing such a verdict or decision, documents confirming payment of such receivables with possible interest or fines or conclusion of a binding agreement regarding repayment of such receivables, 6) declaration of the Contractor about the lack of a judgment against him a preventive prohibition of applying for ordersia public. - Statements or documents confirming fulfillment of the conditions for participation in the proceedings and no grounds for exclusion: 1) EAT. The uniform European Order Document should be sent in electronic form, in accordance with the requirements specified in point X of the ToR.
Other documents and statements:
1) Offer form - template attachment 2 to the ToR 2) Price specification prepared in the manner providedin point XIII of this SIWZ, 3) Technical information on the subject of the order in the form of detailed technical data and tests published or confirmed by the producer of products, which will allow the tender commission to assess whether the products offered meet the technical requirements contained in Annex 1 to the ToR (technical information prepared only in the language afterThe Contractor who has its registered office or place of residence outside the territory of the Republic of Poland shall submit documents in accordance with the provisions of Part VII point 4 of the ToR (p. 7).
Pursuant to Art. 22a of the Public Procurement Law, the Contractor may rely on technical capabilities to confirm compliance with the conditions of participation in the proceedings in relevant situations and in relation to this order.or professional or the financial or economic situation of other entities, regardless of the legal nature of the legal relationships that connect it with it (entities providing resources). The Contractor, which relies on the abilities or situation of other entities, must prove to the Employer that by implementing this order will have the necessary resources of these entities, in particularby obliging these entities to provide them with the necessary resources for the needs of the order.
I. The bid bond: 1. The ordering party requires the bid bond to be submitted by the Contractors submitting bids for each part of the order. 2. A deposit is established: for 1 part of the subject of the order in the amount of: 20, 000.00 PLN, for the second part of the subject of the order in the amount of 8, 000.00 PLN. 3.The Contractor shall pay the bid security in the form selected by him below: 1) in cash, 2) in bank guarantees or social-savings bank guarantees, but the obligation of the cash register is a monetary liability, 3) in bank guarantees, 4) in insurance guarantees, 5) in sureties granted by entities referred to in art. 6b par. 5 point 2 of the Act from-on 9.11.2000 on the establishment of the Polish Agency for Enterprise Development (Journal of Laws of 2016, items 359, 2260 and 2017, item 1089). 4. The bid security paid in cash shall be paid by bank transfer to the Employer's bank account: Bank Gospodarstwa Krajowego, AL. Jerozolimskie 7, 00-955 Warsaw, invoice number: 02 1130 1017 0020 1459 2320 0001 with the annotation: "Wadium nr sprawy 09 / ZPP / 2018, Part ....." 5. Deposit securityesione in cash, the Employer stores on a bank account. 6. Bid bond paid in cash must be submitted in advance so that it will affect the bank account of the Ordering Party before the deadline for submission of tenders. The above recommendation results from the duration of interbank settlements. The date of crediting the bank account is considered as the date of payment of the bid bond in cash-Employer. 7. The deposit paid in cash shall be returned along with interest resulting from the bank account agreement on which it was stored, reduced by the costs of running a bank account and bank commission for transferring money to the bank account indicated by the Contractor. 8. Deposit paid in a form other than money must be submitted in the form of the original together with the offer in-a separate envelope.
9. The policy, guarantee, guarantee or other document constituting the form of the bid bond should contain the statement that at the first written request of the Ordering Party calling for payment of the deposit amount in accordance with the terms of the specification of essential conditions of the order, its unconditional payment is made without any reservations from the guarantor / guarantor. 10. In the case of unsecuredbid of one of the forms of bid bond specified in the present specification (failure to pay the tender bond or making an incorrect payment) the Contractor's offer shall be subject to rejection. 11. The Ordering Party shall immediately return the bid security to all Contractors after the selection of the most advantageous offer or cancellation of the proceedings, except for the Contractor whose offer will be selected as the most advantageous. 12. Contractors, ktThe offer will be selected as the most advantageous, the Ordering Party will return the deposit immediately after the conclusion of the contract. 13. The Ordering Party shall immediately return the bid bond at the request of the Contractor who withdrew the offer before the deadline for submission of tenders. 14. The ordering party shall retain the bid bond with interest in the event of premises specified in art. 46 ust. 4a and 5 of the Public Procurement Law. 15. Within the scope of the bid bondto regulate the Public Procurement Law contained in art. 45 and 46 of Public Procurement Law.
II. These proceedings are conducted with the application of art. 22aa section 1 of the PPL, the so-called reverse procedure, which means that the Purchaser will first evaluate the offers, and then examine whether the Contractor whose offer has been assessed as the most advantageous is not subject to exclusion and meets the conditions for participation inostępowaniu.
III. Declaration - within 3 days from posting on the website of the information on the opening of tenders, the Contractor shall provide the Ordering Party with the about belonging or not belonging to the same capital group. With the submission of a statement, the Contractor may provide evidence that links with another Contractor do not lead to distortion of competition in this proceeding - model --Annex No. 4
IV. Information clause from art. The 13th edition of the law was published in the SIWZ in part XI.
Internet address (URL): www.wfdif.com.pl

Documents

Tender Notice
Login to view

Similar tenders

Poland Public Procurement Intelligence

Frequently asked questions

The bid deadline for Contract notice: Film equipment was 31 Oct 2018. Bidding is closed.

This tender has been issued by WYTWÓRNIA FILMÓW DOKUMENTALNYCH I FABULARNYCH in Poland.

The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.

This tender is Self Financed

The tender is classified under the following CPV code(s): 32321100 - Film equipment.

The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.

The TendersOnTime reference is 26908433. The purchaser document reference is 407564-2018.

See the Similar Tenders section on this page or browse other tenders from Poland.

This tender falls under Computer Hardware and Software Services in Poland. Suppliers in these sectors can track similar Poland tenders using CPV-based alerts.