Contract notice: Engraving machines Tender in Switzerland - 34595609
Tender notice from Switzerland, published on 11 Jul 2019.
Executive Summary
The ADMINISTRATION FÉDÉRALE DES DOUANES, DIVISION GESTION DE LA DEMANDE ET ACQUISITION, SECTION ACQUISITION has issued a Tender notice for the procurement of a Contract notice: Engraving machines in the Switzerland. This Tender notice was published on 11 Jul 2019 and is scheduled to close on 02 Sep 2019, with an estimated Tender value of Refer Document.
Interested bidders can access detailed Tender information, eligibility criteria, and complete bidding documents by referencing TOT Ref No. 34595609, while the tender notice number is 325708-2019 and Register on the platform.
Object of the contract Engraving machines Description: Contract notice: Engraving machines Authority Type: Ministry or any other national or federal authority Contact Nature: Supplies Procedure: Open procedure Document: Contract notice Regulation: GPA Award criteria: The most economic tender CPV code: 42962500, 42962500 CPV Description: Engraving machines. Laser etching systems for the control of precious metals The procurement section of the Federal Customs Administration has been instructed to launch a new tender for the acquisition of the laser engraving system for the control of precious metals (EMR). Main Site: All of Switzerland. The acquisition section of the Federal Customs Administration has been charto launch a new tender for the acquisition of the laser engraving system for precious metal control (EMR). Laser engraving systems engrave national and international official certification marks, as well as inscriptions and the numbers on objects in precious metals. Finished objects usually have a very polished surface. The apparatuses of taThe demands of this work should enable the engraving of unique pieces of the jewelery industry as well as small series in an economical and efficient way. Engraving (height 0.8 mm) should then be able to check the quality characteristics by means of an integrated optical system. Between 2020 and 2028, it is planned to replace a total of 12 laser engraving systems. In addition, 3 systems of grLaser tests may be necessary to cover all emergent requirements. The proof of the above-mentioned evidence must be provided / attached in its entirety with the offer, without restrictions or modifications, unless it will not be entered into the offer. CAp1: extracts from the prosecution and trade register a) extract from the prosecution register and b) extof the commercial register or equivalent official foreign documents (not more than 3 months old, the date of reference of the delivery of the documents is decisive), prove the absence of tax debts or unpaid social security contributions. Provider Supplier Declaration Completely completed and duly signed. Portrait of the company with the organization chart, form jthe size of the company, its number of employees and its position on the market. Such documentation must be established for the subcontractors also. CAp3: contact person (SPOC) Confirmation of the tenderer it will only have a single point of contact for all processes such as orders, payments, service(data concerning the person and address) CAp4: general responsibility of the project Confirmation of the tenderer that he will assume the general responsibility of the project, in particular that he will be the only contractual partner of the tenderer. The names and roles of any third parties must be CAp5: a) respect for the principles governing the procedure Confirmation of the bidder that he / sheeme and its subcontractors comply with the principles mentioned in the form (Annex 1.1.1) of the Confederation Procurement Conference; (b) additional substantiation concerning the respect of equal pay for women and men Bidders who employ more than 50 people and their first level subcontractors who employ more than 50the expectation of equal pay for women and men not only by signing the form, but also by proving that their wage practices have been verified. CAp6: baseline data Confirmation that the bidder has sufficient recent experience with supplying laser engraving systems that meet the technical requirements indicated in the booklet.The bidder or manufacturer shall have a network of clean technicians ( d / f). It must be reachable by telephone on business days, from Monday to Friday, from 8:00 to 12:00 and from 13:30 to 17:00, Suisse (no value-added service number) CAp8: quality management system The bidder or manufacturer has a quality management system in accordance with the ISO standard or equivalent. CAp9: repair services Confirmation of the tenderer that he will provide repair services within 5 working days. If this deadline can not be respected, the subjectThe Contractor undertakes to provide a replacement device for the duration of the repair. CAp10: Spare Parts Confirmation of the bidder that it will ensure the availability of all spare parts and consumables for at least 10 months. years from delivery. CAp11: state of the art Confirmation of the tenderer that he will deliver at any time, during the period of validity of the contract and under the conditions offered, devices corresponding to the current state of the art. CAp12: tests in phase of evaluation The tenderer confirms that he is able to fully comply with all the tests required (Phases 1, 2 and 3), listed in Chapter 3.6 of the dossier. CAp13: Language of correspondence The tenderer confirms that he will deal with theseems to be ... Partial offers are not allowed. Conditions for countries that do not adhere to WTO agreements: none. Negotiations: None. The tenderer is invited to submit his best offer. Technical rectifications remain reserved. Conditions governing the procedure: the contracting authority awards public contracts for services in Switzerland only tocontractors who guarantee compliance with the provisions on the protection of workers, working conditions and equal pay for men and women. Indication of remedies: in accordance with Art. 30 LMP, the present publication may be attacked, within 20 days of its notification, at the Federal Administrative Court, PO Box, 9023 St. Gall. The appeal memorial, to be presented in 2 copies, will indicate the conclusions, reasons and means of proof and will bear the signature of the appellant party or his representative; A copy of this publication and the exhibits invoked as evidence will be attached, when available. Closing time for submission of tenders / remarks: place of deposit: see figure1.2) (a) for delivery to the Federal Customs Administration: delivery by 4 pm at the latest by the deadline indicated above, with proof of receipt issued by the Federal Customs Administration. The delivery by means of a private mail service is considered as personal delivery. In this case, the offer must be submitted to the Federal Customs Office no later than16:00 (please ask in all cases for proof of receipt) b) postal mail: the postage stamp or barcode of a Swiss post office is conclusive. In the case of foreign tenderers, proof of receipt of a Swiss diplomatic or consular representation is decisive (the date of the stamp affixed by the undertaking is not authentic);submission of an offer to a Swiss diplomatic or consular representation abroad, the tenderer must send by telefax to the adjudicator a copy of the certificate of receipt issued by representation in question at the latest until the end of the the submission of tenders Remarks (time allowed to ask questions in writing). If questions arise duringe the elaboration of the offer, they can be posed exclusively in the form of anonymous questions in the FAQs of the site simap.ch Each question must be posed separately in the forum (one question per entry). Answers are given in the Frequently Asked Questions on the simap.ch site. All questions and answers can be viewed by all bidders.ures the documentation for the call for tenders. The tenderer is himself responsible for informing himself of any questions and answers in the frequently asked questions. National reference publication: SIMAP of 8.7.2019, doc. 1085981. Deadline for questions in writing: 12.8.2019. Conditions for obtaining the tender dossier: the documents may bedownload from the electronic platform www.simap.ch under the heading at your disposal. Internet address (URL): https://www.simap.ch
The bid deadline for Contract notice: Engraving machines was 02 Sep 2019. Bidding is closed.
This tender has been issued by ADMINISTRATION FÉDÉRALE DES DOUANES, DIVISION GESTION DE LA DEMANDE ET ACQUISITION, SECTION ACQUISITION in Switzerland.
The tender value is not disclosed; please refer to the tender document. EMD / bid security details are provided in the tender document.
This tender is Self Financed
The tender is classified under the following CPV code(s): 42962500 - Engraving machines.
The tender notice and related documents are listed in the Documents section above. Select a document to view or download it. Please log in or register to access the documents. If you cannot find additional documents in the Documents section, please log in to your account and Send Document Request from your account section.
The TendersOnTime reference is 34595609. The purchaser document reference is 325708-2019.
This tender falls under Technology and Equipment in Switzerland. Suppliers in these sectors can track similar Switzerland tenders using CPV-based alerts.